Search results for "Chemical Engineering"

Spray-Drying Performance and Thermal Stability of L-Ascorbic Acid Microencapsulated with Sodium Alginate and Gum Arabic

2019

[EN] The potential of sodium alginate (ALG) and gum arabic (GA) as wall polymers for Lascorbic acid (AA) encapsulation as a tool for their preservation against the thermo-oxidative degradation was investigated. The influence of such polymers used as wall material on the AAcontent, size, encapsulation efficiency, encapsulation yield and thermo-oxidative stability were evaluated. The AA-microparticles were obtained using the spray-drying technique. An experimental Taguchi design was employed to assess the influence of the variables in the encapsulation process. The microparticles morphology and size distribution were characterized by scanning electron microscopy and laser diffraction. The the…

Electrochemical polymerization of ambipolar carbonyl-functionalized indenofluorene with memristive properties

2019

Abstract Carbonyl-functionalized indenofluorene was electropolymerized with a high faradaic efficiency of 85% and the solid state properties of the resulting polymeric thin films were investigated. They displayed modular optical properties depending on their oxidation state. The approach used for inorganic semiconductors was applied to polyindeonofluorene derivative. Mott-Schottky analysis evidenced a switching from p-type to n-type electrical conduction, suggesting an ambipolar behaviour of the polymer. As an application, flexible organic memristors were fabricated and resistive switching properties were observed.

Comparative assessment of a foam-based method for ISCO of coal tar contaminated unsaturated soils

2019

Abstract In situ delivery of liquid reagents in vadose zone is limited by gravity and soil anisotropy. A new foam-based delivery method of persulfate (PS) solutions in unsaturated soils was previously shown to overcome these limitations. The goal of this paper is to demonstrate the efficiency of this method regarding contaminant removal. Hence, the comparative oxidation of 200 mg.kg−1 coal tar artificially contaminated soils with thermally activated PS was carried out after PS-delivery using foam, surfactant solution and pure water. The foam-based method was compared in unfavorable conditions to the reference methods. Especially, in the latter, soil and oxidant solutions were thoroughly mix…

Adsorption equilibria of water vapor on cork.

2010

International audience; We report here for the first time a complete thermodynamic study of water vapor adsorption on crude cork powder and plate. Adsorption−desorption isotherms were accurately measured by thermogravimetry at 283, 298, and 313 K in a large range of relative pressure. Adsorption enthalpies were determined by calorimetry as a function of loading. Adsorption−desorption isotherms exhibit a hysteresis due to the swelling of the material. The influence of the presence of lenticels on the adsorption properties of cork is found to be negligible. A detailed analysis and interpretation of adsorption data allow proposal of an adsorption mechanism in two steps. (i) First, water adsorb…

Corrosion in alkanolamine used for acid gas removal: From natural gas processing to CO2 capture

2010

The aim of this paper is to review some of the parameters influencing the corrosivity of alkanolamine solvents used for natural gas purification or for CO2 capture. In the light of literature data and of new experimental results, the influences of temperature and of acid gas loading are discussed. These two parameters appear to have a strong impact on corrosion rates of carbon steel, with extrapolated corrosion rates of several tens of mm/year for the highest temperature and acid gas loading condition.

Functionalized halloysite nanotubes: Efficient carrier systems for antifungine drugs

2018

Abstract Halloysite-cyclodextrin hybrid was employed as carrier for sustained release of clotrimazole for vaginal or buccal treatment of Candidiasis. The nanocarrier was obtained by functionalization of halloysite surface with cyclodextrin moieties by means of microwave irradiation, with the final goal to obtain a scaffold for the covalent linkage of cysteamine hydrochloride. The interaction between clotrimazole and the pristine components, namely cyclodextrin and halloysite, was thoroughly investigated by several techniques such as DSC, TGA, UV–vis spectroscopy and some adsorption studies were, also, carried out. The release of the antifungine molecule was finally investigated in a medium …

Analysis of optimal temperature, pressure and binder quantity for the production of biocarbon pellet to be used as a substitute for coke

2019

In order to contribute to the decarbonization of the economy, efficient alternatives to coal and coke should be found not only in the power sector but also in the industrial sectors (like steel, silicon and manganese production) in which coal and coke are used as a reductant and for steel production also as a fuel. To this aim many research works have been focused on the development of a coke substitute based on woody biomass and known as “biocarbon”. There are still barriers to overcome, among them: the biocarbon low density, poor mechanical strength and high reactivity. In this paper a new biocarbon production methodology is proposed, based on: pyrolysis at 600 °C, densification (using py…

Sewage sludge as cheap alternative to microalgae as feedstock of catalytic hydrothermal liquefaction processes

2019

Abstract Production of biocrude through hydrothermal liquefaction (HTL) of sewage sludge (SS) and Chlorella vulgaris was investigated. NiMo/Al2O3 (KF 851), CoMo/Al2O3 (KF 1022) and activated carbon felt, tested as catalysts at 598 K for 30 min, did not change the biocrude yield but significantly improved its quality. Quantitative sulfur removal and lower oxygen content were found in biocrude when KF 851 and KF 1022 were used with C. vulgaris. The same catalysts decreased O/C and S/C ratio of the biocrude from SS. The highest HHV (38.19 MJ/kg) and H/C ratio (1.65) and the lowest O/C (0.11) of the biocrude from SS were obtained with the cheaper activated carbon felt. A new product phase, prob…

Metal distribution in the process of lignocellulosic ethanol production from heavy metal contaminated sorghum biomass

2016

Effect of torrefaction on properties of pellets produced from woody biomass

2020

Torrefaction has been recognized as a promising strategy to improve handling and storage properties of wood-based pellets, thus producing a uniform-quality commodity with high energy density and hydrophobicity. In this work, pellets produced from spruce stem wood, bark, and forest residues were torrefied in a bench-scale tubular reactor at 225 and 275 °C with two residence times (30 and 60 min). The effects of torrefaction on general properties, grindability, mechanical properties, hydrophobicity, and microstructure of the studied pellets were investigated. The increase of torrefaction severity reduced mass yields, but the heating values and the fixed carbon content of the torrefied pellets…