Search results for "Compression molding"
showing 9 items of 19 documents
Improved experimental characterization of crystallization kinetics
2005
Polymer solidification occurring in many processes, like for instance injection molding, compression molding and extrusion, is a complex phenomenon, strongly influenced by the thermo-mechanical history experienced by the material during processing. From this point of view, characterization of polymer crystallization in the range of processing con- ditions, i.e. including high cooling rate, is of great technological and academic interest. Quiescent, non-isothermal crys- tallization kinetics of two polypropylene resins were investigated using a new method, based on fast cooling of thin samples with air/water sprays and optical detection of the crystallization phenomenon. The range of cooling …
Covalent RGD modification of the inner pore surface of polycaprolactone scaffolds
2011
Scaffold production for tissue engineering was demonstrated by means of a hot compression molding technique and subsequent particulate leaching. The utilization of spherical salt particles as the pore-forming agent ensured complete interconnectivity of the porous structure. This method obviated the use of potentially toxic organic solvents. To overcome the inherent non-cell-adhesive properties of the hydrophobic polymer polycaprolactone (PCL) surface activation with a diamine was performed, followed by the covalent immobilization of the adhesion-promoting RGD-peptide. The wet-chemical approach was performed to guarantee modification throughout the entire scaffold structure. The treatment wa…
Integration of PCL and PLA in a monolithic porous scaffold for interface tissue engineering.
2016
A novel bi-layered multiphasic scaffold (BLS) have been fabricated for the first time by combining melt mixing, compression molding and particulate leaching. One layer has been composed by polylactic acid (PLA) presenting pore size in the range of 90-110µm while the other layer has been made of polycaprolactone (PCL) with pores ranging from 5 to 40µm. The different chemo-physical properties of the two biopolymers combined with the tunable pore architecture permitted to realize monolithic functionally graded scaffolds engineered to be potentially used for interface tissues regenerations. BLS have been characterized from a morphological and a mechanical point of view. In particular, mechanica…
Influence of the Preparation Method and Photo-Oxidation Treatment on the Thermal and Gas Transport Properties of Dense Films Based on a Poly(ether-bl…
2018
Dense films based on the hydrophobic Pebax®
Enhancement of Static and Fatigue Strength of Short Sisal Fiber Biocomposites by Low Fraction Nanotubes
2021
AbstractThanks to good mechanical performances, high availability, low cost and low weight, the agave sisalana fiber allows to obtain biocomposites characterised by high specific properties, potentially very attractive for the replacement of synthetic materials in various industrial fields. Unfortunately, due to the low strength versus transversal damage processes mainly related to the matrix brittleness and/or to the low fiber/matrix adhesion, the tensile performance of random short fiber biocomposites are quite low, and to date most of the fiber treatments proposed in literature to improve the fiber-matrix adhesion, have not led to very satisfactory results. In order to overcome such a dr…
Creep Behavior of Poly(lactic acid) Based Biocomposites
2017
Polymer composites containing natural fibers are receiving growing attention as possible alternatives for composites containing synthetic fibers. The use of biodegradable matrices obtained from renewable sources in replacement for synthetic ones is also increasing. However, only limited information is available about the creep behavior of the obtained composites. In this work, the tensile creep behavior of PLA based composites, containing flax and jute twill weave woven fabrics, produced through compression molding, was investigated. Tensile creep tests were performed at different temperatures (i.e., 40 and 60 °C). The results showed that the creep behavior of the composites is strongly inf…
Processing and Mechanical Properties of Natural Fiber Reinforced Thermoplastic Starch Biocomposites
2007
Natural fiber reinforced starch polymers are processed by compression molding. Potato, sweet potato, and corn starch are used as matrices. Three types of natural fibers, namely sisal, jute, and cabuya, are used in concentrations varying from 2.5 to 12.5% w/w in the composites. Different plasticizers are used for the starch polymers, such as water and glycerol. Mechanical properties are assessed by tensile and impact tests. In both cases, improved mechanical properties are obtained at increasing fiber contents. Tensile strength appears to be markedly improved with the addition of 10% by weight of sisal fibers, while the best results for impact strength are obtained for cabuya fibers.
Thermomechanical Properties of Radiation-Modified Polyethylene/Ethylene-Propylene-Diene Copolymer/Liquid-Crystalline Copolyester Blends
1999
Radiation-modified blends of high-density polyethylene (PE) with ethylene-propylene-diene copolymer (EPDM; 10-65 wt.%) and thermotropic liquid-crystalline polymer (LCP; 10 wt.%) were investigated. The LCP was a liquid-crystalline copolyester of 40% poly(ethylene terephthalate) with 60% 4-hydroxybenzoic acid. The constituents were blended using a circular extruder, the specimens were prepared by compression molding and irradiated by 60Co γ-radiation up to 200 kGy. Mechanical, thermal, and morphological properties in wide temperature range were investigated for the irradiated and non-irradiated specimens. The effects of irradiation on the thermomechanical behaviour of the PE matrix are discus…
Effect of different processing techniques and presence of antioxidant on the chitosan film performance
2022
In the last two decades, the naturally occurring polysaccharides have gained great attention because of their potential applications in different sectors, for example, from food to biomedical sectors. Chitosan is a cationic polysaccharide with good transparency, and currently, it has been considered also as suitable material for the formulation film and coating in cultural heritage protection. In this work, the chitosan films (Ch), with and without natural antioxidant such as citric acid (CA), are formulated considering two different processing techniques: (i) conventional solvent casting and (ii) compression molding, that is an unconventional method for this polysaccharide, giving the poss…