Search results for "Crystallite"
showing 10 items of 347 documents
Photostimulable energy transfer in doped nanostructures of alkali halides
1998
Abstract In nanostructures of doped alkali halides, unrelaxed H-centres produced in the exciton decay are able to escape from the surface thus producing in the grains of polycrystalline film an excess concentration of F-centres, which has a great tendency to form an interacting F-centre chain or a canal. Role of this F-centre chain in photostimulable energy transfer is analysed. It is concluded that specific interaction of unrelaxed H-centres and electrons with the F-centre chain (or the canal) leads to the temperature-independent exciton or electron transport at any distance. Hence, the temperatureindependent photostimulated luminescence (PSL) response production and retrieval are experime…
Positron Annihilation in Steel Samples Deformed by Uniaxial Tension
2008
Angular distributions of the positron annihilation quanta were measured for steel ST2 SAL samples deformed by uniaxial tension up to difierent deformation degrees. The dependences of the S parameter on the relative elongation of the samples are presented. The positron annihilation data for steel are compared with the results obtained previously for polycrystalline iron samples deformed by uniaxial tension up to difierent deformation degrees in the proportionality and limited proportionality regions.
Microstructural evolution and growth of crystallite size of mullite during thermal transformation of kyanite
1997
Abstract The microstructural evolution of mullite during the thermal transformation of kyanite has been studied in the temperature range 1200–1600 °C. The shape and size of the grains were analysed by means of SEM-EDS while crystallite size evolution was studied by X-ray line profile analyses. The results obtained showed that total transformation of kyanite to mullite takes place between 1350 and 1400 °C. At temperatures below 1350 °C needle-like mullite grains are always produced. At higher temperatures the mullite grains reveal rounded end platelet morphology. Evolution from needle-like to platelet shape was correlated with the X-ray data.
Polycrystalline TiO2 impregnated with cardanol-based porphyrins for the photocatalytic degradation of 4-nitrophenol
2004
Hydrogenated cardanol (3-n-pentadecylphenol), a renewable organic resource obtained by vacuum distillation of roasted “cashew nut shell liquid” (CNSL), a by-product of the cashew industry, has been used to synthesize novel lipophilic porphyrins. Polycrystalline TiO2 impregnated with these novel “cardanol-based” porphyrins as sensitizers has been investigated in the photodegradation of 4-nitrophenol (4-NP) in aqueous suspension. The results indicated that the presence of the sensitizer enhances the photoactivity of polycrystalline bare TiO2 in the process. The activating effect was higher in the case of the Cu-complex.
Effect of sintering process on color parameters of nano-sized yttria partially stabilized tetragonal monolithic zirconia
2018
Background Sintering process is responsible for aesthetic of zirconia restoration. This study evaluated the effect of different sintering temperatures and sintered-holding times on color parameters of monolithic zirconia. Material and Methods One hundred and thirty five zirconia bar specimens (width-length-thickness = 10×20×1.5 mm) were prepared from yttria-stabilized tetragonal zirconia polycrystalline (Y-TZP) ceramic and randomly divided into nine groups to be sintered at different temperatures [decreasing- (SD, 1350°C), regular- (SR, 1450°C), and increasing- (SI, 1550°C) sintering temperature] and different sintered-holding times [shortening- (HS, 60 min), regular- (HR, 120 min), and pro…
Influence of thermal tempering processes on color characteristics of different monolithic computer-assisted design and computer-assisted manufacturin…
2019
Background The optical properties of dental restoration were influenced by the sintering parameters. This study investigated the effects of different tempering processes on optical properties of three monolithic Cad-Cam ceramics. Material and Methods 135 monolithic material bars (4 mm width, 14 mm length, 1.2 mm thickness) were prepared from yttria-stabilized tetragonal zirconia polycrystalline (inCoris TZI, I), zirconia-reinforced lithium silicate (Vita Suprinity, V), and lithium disilicate glass (e.max CAD, E) ceramics, with different tempering processes through slow (S), normal (N), and fast (F) cooling (n=15). The color appearance (∆EW), translucency parameter (TP), contrast ratio (CR),…
Role of sintered temperature and sintering time on spectral translucence of nano-crystal monolithic zirconia
2018
Background Sintering process is accountable for aesthetic appearance of zirconia restoration. This study appraised the effect of different sintering procedure via sintered temperatures and sintering times on spectral translucence of monolithic zirconia. Material and Methods One hundred and thirty five monolithic zirconia specimens (width, length, thickness = 10, 20, 1.5 mm) were prepared from yttrium-stabilized tetragonal zirconia polycrystalline (Y-TZP, Ceramill®) and unintentionally divided into nine groups to be sintered at different temperatures [decreasing- (SD, 1350°C), regular- (SR, 1450°C), and increasing- (SI, 1550°C) sintering temperature] and different sintering times [shortening…
Influence of different veneering techniques and thermal tempering on flexural strength of ceramic veneered yttria partially stabilized tetragonal zir…
2019
Background Different technique for ceramic veneering and thermal tempering process are expected to be a reason for alteration in strength of ceramic veneered zirconia. This study evaluates the effect of different veneering technique and varied thermal tempering process on flexural strength of ceramic veneered zirconia. Material and Methods Ceramic veneered zirconia bars (25 mm length, 4 mm width, 0.7&1.0mm of zirconia & ceramic thickness) were prepared from zirconia block (e.max® ZirCAD), sintered at 1500°C for 4 hours, and veneered with ceramics with different techniques including CAD-fused using e.max CAD® (C), Pressed-on using e.max® Zirpress (P), and layering using e.max® ceram (L), wit…
Sol-gel produced humidity sensor
1993
Abstract The sol-gel produced polycrystalline Prussian Blue thick films as planar humidity sensors have been investigated by impedance spectroscopy. The equivalent circuit used allows simulation in all the investigated r.h. range (10–100%). The region of changes of sample resistance is about five orders, which is enough for high measuring sensitivity.
The interplay of crystallization kinetics and morphology during the formation of SnO2 nanorods: snapshots of the crystallization from fast microwave …
2011
A microwave-assisted reaction pathway to rutile SnO2nanorods was investigated. The microwave-treatment significantly reduces the reaction time compared to standard hydro-/solvothermal techniques. By moving the overall process into a shorter time slot, the growth and crystal formation during the reaction could be monitored via snapshots by trapping the intermediates through quenching. To gain a better insight into the template-free growth of one-dimensional (1D) nanostructures, a parameter-dependent (various temperatures/pressures and times were investigated) study was carried out. For all materials, the phase purity and crystallite sizes were determined by X-ray powder diffraction (XRD). Th…