Search results for "DAMPE"
showing 10 items of 127 documents
Design of RC joints equipped with hybrid trussed beams and friction dampers
2021
Abstract The challenge of this research consists in the first attempt to apply a dissipative friction connection to beam-to-column joints with semi-prefabricated Hybrid Steel-Trussed Concrete Beams (HSTCB) and RC pillars cast in-situ. Nowadays, HSTCBs are widely adopted in civil and industrial buildings and, therefore, it is required to evaluate their compliance with the capacity design criteria and their seismic energy dissipation capability. However, the design of the reinforcement of such beams usually lead to the adoption of large amount of steel within the panel zone which becomes potentially vulnerable to the effects of seismic cyclic actions and dramatically reduce the dissipation ca…
Generalization of the Den Hartog model and rule-of-thumb formulas for optimal tuned mass dampers
2022
In recent years, the need of improving safety standards for both existing and new buildings against earthquake and wind loads has created a growing interest in the use of the so-called tuned mass dampers, exploited to control, in active or passive way, the dynamic response of structures. To design and optimize tuned mass damper systems, the effective analytical procedure proposed by Den Hartog in his seminal work (Den Hartog, 1985) has been widely adopted over the years, without including damping of the main structure. However, in many cases of engineering interest, the damping of the primary system plays a key role in the overall mechanical response, with the result of an increase in compl…
Control of hysteretic instability in rotating machinery by elastic suspension systems subject to dry and viscous friction
2010
Abstract Most of the undesired whirling motions of rotating machines can be efficiently reduced by supporting journal boxes elastically and controlling their movement by viscous dampers or by dry friction surfaces normal to the shaft axis, which rub against the frame. In the case of dry dampers, resonance ranges of the floating support configuration can be easily cut off by planning a motionless adhesive state of the friction surfaces. On the contrary, the dry friction contact must change automatically into sliding conditions when the fixed support resonances are to be feared. Moreover, the whirl amplitude can be restrained throughout the speed range by a proper choice of the suspension-to-…
Numerical investigation of optical heartbeats with external driving forces
2010
The role of harmonic and random external forces in a phenomenological nonlinear model of optical heartbeats is investigated. External forces trigger damped oscillations at the natural frequency of the system and higher harmonics. The numerical results are compared with experimental ones.
Fractional calculus for the solution of non-linear stochastic oscillators with viscous dampers devices
2009
Fluid viscoelastic dampers are of great interest in different fields of engineering. Examples of their applications can be found in seismic mitigation design of structures or in vibration absorption in airplane suspension. Such devices introduce a non-linear dissipative term in the equation of motion and therefore, the solution of even a single degree of freedom system excited by a white noise process, becomes prohibitive. The solution is usually obtained by approximated methods, like the stochastic linearization technique. In this paper it is shown that, by means of fractional operators, it is possible to find the solution of oscillators provided with fluid viscoelastic devices, approachin…
Exact frequency response of bars with multiple dampers
2016
The paper addresses the frequency analysis of bars with an arbitrary number of dampers, subjected to harmonically varying loads. Multiple external/internal dampers occurring at the same position along the bar, modelling external damping devices and internal damping due to damage or imperfect connections, are considered. In this context, the challenge is to handle simultaneous discontinuities of the response variables, i.e. axial force/displacement discontinuities at the location of external/internal dampers. Based on the theory of generalized functions, the paper will present exact closed-form expressions of the frequency response under point/polynomial loads, which hold regardless of the n…
Amplification of Interstory Drift and Velocity for the Passive Control of Structural Vibrations
2008
Mitigation of structural damage due to earthquake ground motion may be performed by inserting dampers in the structure. In order to enhance the damping effect various toggle brace configurations have been recently proposed. In this paper these equipments are analyzed in detail and compared with a new one here proposed. The analysis is performed by taking into account the inherent nonlinearities of the damper by means of stochastic analysis and validated by using time histories of recorder accelerograms and by the stochastic analysis using spectrum consistent power spectral density.
Optimal design of viscoelastic tuned mass dampers for structures exposed to coloured excitations
2022
Dynamic interaction between primary and secondary structures can alter the response of buildings, bridges and other civil engineering structures to external stressors such as earthquakes and windstorms. TMDs (tuned mass dampers) are a well-known example of passive control devices that exploit this concept. A TMD consists of a secondary mass attached to the primary structure through a linear or nonlinear link. Various formulations exist to optimize the performance of TMDs, depending on the chosen criterion. Typically, the TMD is optimized considering the steady-state amplitude of motion of the primary structure, e.g., when subjected to monochromatic harmonic excitation (H∞ criterion) or whit…
The affect of contact force sensations on user performance in virtual assembly tasks
2007
International audience; Abstract The development of a realistic virtual assemblyenvironment is challenging because of the complexity of the physical processes and the limitation of available VRtechnology. Many research activities in this domain pri-marily focused on particular aspects of the assembly task such as the feasibility of assembly operations in terms of interference between the manipulated parts. The virtualassembly environment reported in this research is focusedon mechanical part assembly. The approach presented ad-dresses the problem of part-to-part contacts during themating phase of assembly tasks. The system describedcalculates contact force sensations by making their inten-s…
Search for gamma-ray spectral lines with the DArk Matter Particle Explorer
2021
The DArk Matter Particle Explorer (DAMPE) is well suitable for searching for monochromatic and sharp $\gamma$-ray structures in the GeV$-$TeV range thanks to its unprecedented high energy resolution. In this work, we search for $\gamma$-ray line structures using five years of DAMPE data. To improve the sensitivity, we develop two types of dedicated data sets (including the BgoOnly data which is the first time to be used in the data analysis for the calorimeter-based gamma-ray observatories) and adopt the signal-to-noise ratio optimized regions of interest (ROIs) for different DM density profiles. No line signals or candidates are found between 10 and 300 GeV in the Galaxy. The constraints o…