Search results for "Dopant"
showing 10 items of 162 documents
Boosting inverted perovskite solar cell performance by using 9,9-bis(4-diphenylaminophenyl)fluorene functionalized with triphenylamine as a dopant-fr…
2019
In this study, two newly developed small molecules based on 9,9-bis(4-diphenylaminophenyl)fluorene functionalized with triphenylamine moieties, namely TPA-2,7-FLTPA-TPA and TPA-3,6-FLTPA-TPA, are designed, synthesized and characterized. The electrochemical, optical and thermal properties of both materials are investigated using various techniques. Afterwards, these materials are employed as dopant-free hole transporting materials (HTMs) in planar inverted perovskite solar cell devices with the aim of determining the device performance and studying their stability in comparison with reference N4,N4,N4′′,N4′′-tetra([1,10-biphenyl]-4-yl)-[1,1′:4′,1′′-terphenyl]-4,4′′-diamine (TaTm)-based devic…
Large scale synthesis of nanostructured zirconia-based compounds from freeze-dried precursors
2013
Nanocrystalline zirconia powders have been obtained at the multigram scale by thermal decomposition of precursors resulting from the freeze-drying of aqueous acetic solutions. This technique has equally made possible to synthesize a variety of nanostructured yttria or scandia doped zirconia compositions. SEM images, as well as the analysis of the XRD patterns, show the nanoparticulated character of those solids obtained at low temperature, with typical particle size in the 10–15 nm range when prepared at 673 K. The presence of the monoclinic, the tetragonal or both phases depends on the temperature of the thermal treatment, the doping concentration and the nature of the dopant. In addition,…
High temperature oxidation of higher manganese silicides
2021
Abstract The oxidation kinetics and mechanisms of higher manganese silicides (HMS) MnSi1.75, MnSi (1.75-x)Gex, MnSi(1.75-x)Alx (with x = 0.005 and 0.01)were studied and the effects of densification methods and dopant concentration discussed. Oxidation experiments were conducted using thermogravimetry (TGA), while post characterization with X-ray Photoelectron Spectroscopy (XPS) and Scanning Electron Microscope (SEM) showed that spark plasma sintering (SPS) is a better densification method than hot pressing (HP). Except for undoped HMS, HMS doped with 0.5at% Ge had the lowest oxidation rate. Stable formation of a SiO2 protective layer was the main reason for improved oxidation resistance in …
V-containing ZrO 2 inorganic yellow nano-pigments prepared by hydrothermal approach
2017
Abstract Recent results on the preparation, characterization and color properties of the V-containing ZrO 2 inorganic yellow nano-pigment are reported. A series of monoclinic V-ZrO 2 solid solution nanocrystals (V x Zr 1-x O 2 , being x = 0, 0.1, 0.02, 0.03, 0.04, 0.05, 0.065, 0.08 and 0.1) were prepared straightforward by hydrothermal processing of mixtures of zirconyl nitrate and ammonium metavanadate in water. Interestingly, the crystalline precipitated obtained by hydrothermal processing at 140 °C for 3 d was almost entirely V-containing ZrO 2 nanocrystals with the structure of monoclinic zirconia for the whole range of compositions. Lattice parameters changes along the series of prepar…
Mn2+-induced room-temperature ferromagnetism and spin-glass behavior in hydrothermally grown Mn-doped ZnO nanorods
2014
The magnetic properties of Mn-doped ZnO (ZnO:Mn) nanorods grown by hydrothermal process at a temperature of 200 °C and a growth time of 3 h have been studied. The samples were characterized by using powder X-ray diffraction with Rietveld refinement, scanning electron microscopy, energy-dispersive X-ray analysis and SQUID magnetometry. Mn (3 wt%) and (5 wt%)-doped ZnO samples exhibit paramagnetic and ferromagnetic behavior, respectively, at room temperature. The spin-glass behavior is observed from the samples with respect to the decrease of temperature. At 10 K, both samples exhibit a hysteresis loop with relatively low coercivity. The room-temperature ferromagnetism in 5 wt% Mn-doped ZnO n…
The Luminescence Properties of ZnO:Al Nanopowders Obtained by Sol-gel, Plasma and Vaporization-Condensation Methods
2007
ZnO nanocrystals were synthesized and characterized by XRD and SEM methods. The luminescence spectra and decay kinetics were studied under pulsed laser excitation (266 nm, 8 ns). ZnO and ZnO:Al powders were prepared by sol-gel and plasma chemical synthesis. These powders were used as a raw material for the SPVD (Solar Physical Vapour Deposition) process. In this way, the vaporisation-condensation phenomenon (VC) led to the formation of ZnO whiskers and nanopowders. The luminescence properties of the VC nanopowders were studied and compared to those displayed by the raw material. The Al dopant, present in the raw powders as a solid solution and ZnAl2O4 precipitates, was only present as Al io…
Elastic, electronic and optical properties of boron- and nitrogen-doped 4,12,4-graphyne nanosheet
2020
Abstract The effects of boron (B) and nitrogen (N) dopants on 4,12,4-graphyne have been systematically investigated with density functional theory (DFT) calculations. The charge density analysis reveals that the N dopant at the sp-site destroys the acetylenic linkage in 4,12,4-graphyne, but instead tends to form a polar bond. The B- and N-doped 4,12,4-graphyne systems exhibit p- and n- semiconductor characters, respectively. Some obvious spin splitting polarizations can be observed in their band structures and DOS. Moreover, there is a giant difference in effective masses between electrons and electron holes, especially for B-doped 4,12,4-graphyne at C5 site. The directional electron and el…
Ionic liquid modified zinc oxide injection layer for inverted organic light-emitting diodes
2013
Abstract We have demonstrated a novel approach for fabricating efficient hybrid organic–inorganic light emitting diodes (HyLEDs) by introducing dopants into solutions processable metal oxides as an interfacial layer. The doped ZnO is prepared by adding ionic liquid (IL) to a precursor solution for the ZnO. In this way a heavily doped ZnO:ILs cathode was obtained that enhances the electron injection properties and assures a good wetting of the organic active materials.
Local environment of Barium, Cerium and Yttrium in BaCe1−xYxO3−δ ceramic protonic conductors
2007
Abstract Y-doped barium cerate protonic conductors with composition BaCe 1 − x Y x O 3 − δ ( x = 0.02, 0.1, 0.2, 0.3) have been synthesized by sol–gel route, giving by X-ray diffraction tests a homogeneous crystalline phase. A commercial sample BaCe 0.8 Y 0.2 O 3 − δ produced by combustion spray pyrolysis was also provided for comparison aim. The local structure around the cations was studied by X-ray absorption spectroscopy at the K-edges of Ba, Ce and Y. It is demonstrated that the insertion of yttrium in the site of cerium produces a remarkable local distortion of the dopant first-shell octahedral environment that affects also the next coordination shells by a static disorder increas…
Vacuum deposited perovskite solar cells employing dopant-free triazatruxene as the hole transport material
2017
Abstract Planar perovskite solar cells using organic charge selective contacts were fabricated. In a vacuum deposited perovskite-based solar cell, dopant and additive free triazatruxene as the hole transport layer was introduced for device fabrication. High open-circuit voltage of 1090 mV was obtained using methylammonium lead iodide (Eg=1.55 eV) as light harvesting material, thus representing a loss of only 460 mV which is in close vicinity of mature silicon technology (400 mV). The devices showed a very competitive photovoltaic performance, monochromatic incident photon-to-electron conversion efficiency of 80% and the power conversion efficiencies in excess of 15% were measured with a neg…