Search results for "EEB"
showing 10 items of 80 documents
Controlling the thermoelectric properties of polymers: application to PEDOT and polypyrrole
2015
Poly(3,4-ethylenedioxythiophene) (PEDOT) and polypyrrole (PPy) films have been prepared by an electrochemical method in a three electrode cell. The films have been obtained at different oxidation levels regarded as bipolaron, polaron and neutral states by varying the voltage, as is usually done in conjugated heterocyclic polymers. The voltage (-0.2V1.0 V) has been applied versus a Ag/AgCl reference electrode, producing a variation of one order of magnitude in the electrical conductivity and the Seebeck coefficient of the films. In the voltage range explored, the electrical conductivity increases from 80 to 766 S cm(-1) in PEDOT and from 15 to 160 S cm(-1) in PPy, while the Seebeck coefficie…
Hybrids composites of NCCO/PEDOT for thermoelectric applications
2017
Abstract Organic materials are becoming a realistic roadway to fabricate efficient thermoelectric devices using environmental friendly materials. Such requirements are actually fulfilled by thermoelectric generators operating by conducting polymers, but also by hybrid materials. The combination of organic + inorganic compounds may exhibit a high electrical conductivity and Seebeck coefficient as well as lower thermal conductivity in order to efficiently generate thermoelectric power. In these hybrid compounds, perovskite-type oxides are a suitable election for the inorganic part since they have a high Seebeck coefficient although their electrical conductivity is usually low. Blending them w…
Three dimensional PEDOT nanowires network
2016
Abstract A three dimensional (3D) structure of poly(3,4-ethylenedioxythiophene) (PEDOT) nanowires have been prepared by electrochemical polymerization using 3D-alumina templates. The templates were synthesized by pulse anodization in an electrochemical bath. A 3D free standing network has been obtained after the template removal. The morphological analysis by electron microscopy shows the existence of a 3D PEDOT nanowires network whose nanowire diameter is around 20 nm for the vertical nanowires and 10 nm for the transversal connections. Electrical properties such as the I–V characteristics and the Seebeck coefficient were studied for the nanowires network. Also, the optical properties have…
Thermal sensor based on a polymer nanofilm
2016
In this work, we have developed a thermal sensor based on poly(3,4 ethylenedioxythiophene) (PEDOT) nanofilms as thermoelectric material. The PEDOT nanofilms have been synthesized by the electrochemical polymerization method. The thicknesses of the films were around 120 nm. The doping level of PEDOT was controlled by chemical reduction using hydrazine. The achieved Seebeck coeficient is 40 uV/K. A PEDOT nanofilm was integrated into an electronic circuit that amplifies the voltage originated from the Seebeck effect. The temperature increment produced by a fingerprint touching the film is enough to switch on a light emitting diode. Peer Reviewed
Epitaxial growth and thermoelectric properties of TiNiSn and Zr0.5Hf0.5NiSn thin films
2011
Abstract Due to their exceptional thermoelectric properties Half-Heusler alloys like MNiSn (M = Ti,Zr,Hf) have moved into focus. The growth of single crystalline thin film TiNiSn and Zr 0.5 Hf 0.5 NiSn by dc magnetron sputtering is reported. Seebeck and resistivity measurements were performed and their dependence on epitaxial quality is shown. Seebeck coefficient, specific resistivity and power factor for Zr 0.5 Hf 0.5 NiSn at room temperature were measured to be 63 μV K − 1 , 14.1 μΩ m and 0.28 mW K − 2 m − 1 , respectively. Multilayers of TiNiSn and Zr 0.5 Hf 0.5 NiSn are promising candidates to increase the thermoelectric figure-of-merit by decreasing thermal conductivity perpendicular …
The resistivity and thermopower of amorphous Mg-Zn alloys
1983
The resistivity and thermopower of amorphous Mg-Zn alloys have been computed as a function of temperature and composition. The diffraction model incorporating the dynamical partial structure factors is applied. The effect of the electron mean free path is investigated. The authors find that the resistivity is well described by the model, and that the inclusion of the mean free path does not change the results considerably. In the case of thermopower the diffraction model turns out to be inadequate: it gives a composition dependence which is against the experimental evidence. This suggests that there exists another scattering mechanism, which is not accounted for by the diffraction model. Th…
Magnetically enhancing the Seebeck coefficient in ferrofluids.
2019
The influence of the magnetic field on the Seebeck coefficient (Se) was investigated in dilute magnetic nanofluids (ferrofluids) composed of maghemite magnetic nanoparticles dispersed in dimethyl-sulfoxide (DMSO). A 25% increase in the Se value was found when the external magnetic field was applied perpendicularly to the temperature gradient, reminiscent of an increase in the Soret coefficient (ST, concentration gradient) observed in the same fluids. In-depth analysis of experimental data, however, revealed that different mechanisms are responsible for the observed magneto-thermoelectric and -thermodiffusive phenomena. Possible physical and physico-chemical origins leading to the enhancemen…
TCP pārblīves vadības algoritma realizācija un testēšana
2015
Pārraides vadības protokols (turpmāk – TCP) ir viens no galvenajiem protokoliem interneta protokolu kopā. Pārblīves vadība ir būtiskākais TCP elements, kurš nosaka tā veiktspēju. Pārblīve ir pārmērīgi intensīva ziņojumu plūsma, kas aizkavē ziņojumu pārsūtīšanu datoru tīklā, nelabvēlīgi ietekmē datoru tīkla veiktspēju un var radīt pārraidāmās informācijas zudumus. Darbā tiek pētīta un aprakstīta TCP pārblīves vadības protokolu izstrāde Unix saimes operētājsistēmā FreeBSD, izmantojot tajā pieejamo modulāro TCP pārblīves vadības ietvaru. Protokolu testēšana tiek veikta IMUNES datortīklu simulācijas vidē, salīdzinot izveidoto protokolu moduļu veiktspēju ar FreeBSD pieejamo pārblīves vadības pro…
Structure and Doping Determined Thermoelectric Properties of Bi2Se3Thin Films Deposited by Vapour–Solid Technique
2019
In this work, a simple catalyst-free vapour-solid deposition method was applied for controlled deposition of two types (planar and disordered) of continuous Bi 2 Se 3 nanostructured thin films on different (fused quartz/glass, mica, graphene) substrates. Characterisation of electron transport (type, concentration and mobility of the main charge carriers) and thermoelectric properties (Seebeck coefficient and power factor) showed that proposed in this work deposition method allows to obtain Bi 2 Se 3 thin films with power factor comparable and even higher than reported for the Bi 2 Se 3 thin films grown by molecular beam epitaxy technique. Power factor of the best obtained thin films can be …
Structure-determined thermoelectric properties of Bi2Se3 thin films deposited by vapour-solid technique
2018
International audience; In this work, a simple catalyst-free vapour-solid deposition method is applied for controlled obtaining of two types (planar and disordered) continuous Bi2Se3 nanostructured thin films on different (fused quartz/glass, mica, graphene) substrates. Performed for the deposited thin films transport and thermoelectric characterization (type, concentration and mobility of the main charge carriers, Seebeck coefficient and power factor) showed that proposed deposition method allows to fabricate “low-doped” Bi2Se3 thin films with power factor comparable and even higher than reported for the Bi2Se3 thin films fabricated by molecular beam epitaxy technique.