Search results for "ELECTRON"

showing 10 items of 24810 documents

Impact of the molecular structure of an indandione fragment containing azobenzene derivatives on the morphology and electrical properties of thin fil…

2016

Abstract The solution casting method is low-cost processing method. Moreover, it is possible to prepare amorphous thin films by using this method, and thus, both optical quality and electrical properties could be improved in compare to polycrystalline films made by thermal evaporation in vacuum. Therefore, low-molecular-weight compounds that form amorphous structure from solution could be promising in organic electronics. In this work film morphology, molecule energy levels, and charge carrier mobility in thin films of indandione fragment containing azobenzene derivatives were studied. Deep charge carrier trapping states that drastically influenced charge carrier mobility were observed for …

010302 applied physicsOrganic electronicsMaterials science02 engineering and technology021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesAmorphous solidchemistry.chemical_compoundAzobenzenechemistryElectron affinity0103 physical sciencesOrganic chemistryPhysical chemistryGeneral Materials ScienceCharge carrierCrystalliteThin filmIonization energy0210 nano-technologyMaterials Chemistry and Physics
researchProduct

Strain detection in non-magnetic steel by Kerr-microscopy of magnetic tracer layers

2018

Abstract For many applications of steel, e.g. for the evaluation of the fatigue state of components or structures, the characterization of the microscopic strain distribution in the material is important. We present a proof-of-principle for the visualization of such strain distributions by Kerr-microscopy of ferromagnetic tracer layers on nonmagnetic steel sheets. The influence of indentation induced strain on the magnetic domain pattern of 20 nm Galfenol and Permalloy tracer layers on austenitic AISI 904L steel sheets was investigated. The obtained Kerr-microscopy images show a characteristic domain pattern in the strained regions of the steel sheets, which is consistent with a dominant ma…

010302 applied physicsPermalloyAusteniteMaterials scienceStrain (chemistry)Magnetic domainPattern formation02 engineering and technology021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesElectronic Optical and Magnetic MaterialsFerromagnetismIndentation0103 physical sciencesComposite material0210 nano-technologyGalfenolJournal of Magnetism and Magnetic Materials
researchProduct

Effect of nanostructure layout on spin pumping phenomena in antiferromagnet/nonmagnetic metal/ferromagnet multilayered stacks

2017

In this work we focus on magnetic relaxation in Mn80Ir20(12 nm)/Cu(6 nm)/Py(dF) antiferromagnet/Cu/ferromagnet (AFM/Cu/FM) multilayers with different thickness of the ferromagnetic permalloy layer. An effective FM-AFM interaction mediated via the conduction electrons in the nonmagnetic Cu spacer – the spin-pumping effect – is detected as an increase in the linewidth of the ferromagnetic resonance (FMR) spectra and a shift of the resonant magnetic field. We further find experimentally that the spin-pumping-induced contribution to the linewidth is inversely proportional to the thickness of the Py layer. We show that this thickness dependence likely originates from the dissipative dynamics of …

010302 applied physicsPermalloySpin pumpingMaterials scienceCondensed matter physicsSpintronicsGeneral Physics and Astronomy01 natural sciencesFerromagnetic resonancelcsh:QC1-999Magnetic fieldCondensed Matter::Materials ScienceLaser linewidthFerromagnetism0103 physical sciencesAntiferromagnetismCondensed Matter::Strongly Correlated Electrons010306 general physicslcsh:PhysicsAIP Advances
researchProduct

Experimental Investigation of Efficiency Map for an Inverter-Fed Surface-Mount Permanent Magnet Synchronous Motor

2019

Losses in inverter-fed permanent magnet motors are underestimated by using analytical or numerical approach since additional losses due to extra harmonics of the frequency converter are normally skipped. Further, losses in switches and passive components of the converter and the effect of switching frequencies cannot be numerically taken into consideration. Loss-minimizing control and proper efficiency analysis of inverter-fed permanent magnet motors cannot be achieved if an efficiency map is built based on a numerical investigation of the motors alone. This works first reviews losses in a surface-mount permanent magnet synchronous motor (SPMSM) and frequency converters. The efficiency map …

010302 applied physicsPermanent magnet synchronous motorComputer science020208 electrical & electronic engineeringSwitching frequency02 engineering and technologyConverters01 natural sciencesControl theoryModulationHarmonicsvisual_artMagnet0103 physical sciencesElectronic component0202 electrical engineering electronic engineering information engineeringvisual_art.visual_art_mediumInverter2019 8th International Conference on Renewable Energy Research and Applications (ICRERA)
researchProduct

Influence of Sr addition on structural, dielectric and Raman properties of Na0.5Bi0.5TiO3ceramics

2016

ABSTRACTLead free (Na0.5Bi0.5)1-xSrxTiO3 (x = 0, 0.01 and 0.02) ceramics were produced by a conventional solid-state sintering method. X-ray diffraction analysis shows that the obtained samples possess the perovskite structure with rhombohedral symmetry. The microstructure study shows a dense structure, in agreement with the relative density (above 97%). Dielectric analysis revealed the diffuse character of the electric permittivity anomalies and their shift to a lower temperature range after Sr doping of NBT. The Raman spectra are similar for all samples in agreement with the X-ray diffraction data. The possible origin of the observed effects was discussed.

010302 applied physicsPermittivityDiffractionMaterials scienceDopingAnalytical chemistrySintering02 engineering and technologyDielectric021001 nanoscience & nanotechnologyCondensed Matter PhysicsMicrostructure01 natural sciencesElectronic Optical and Magnetic Materialssymbols.namesakeControl and Systems Engineering0103 physical sciencesMaterials ChemistryCeramics and CompositessymbolsRelative densityElectrical and Electronic Engineering0210 nano-technologyRaman spectroscopyIntegrated Ferroelectrics
researchProduct

Processing, basic characterization and standard dielectric measurements on PLZT x/65/35 (2≤x≤13) ceramics

2016

ABSTRACTThe influence of external stress (0-800bar) on the dielectric properties of PLZT x/65/35 (2≤x≤13) ceramics was investigated. Applying uniaxial pressure leads to a change in the peak intensity of the electric permittivity (ϵ), of its frequency dispersion as well as in the dielectric hysteresis. The peak intensity of ϵ becomes broader and shifts to lower temperatures for PLZT x/65/35 with x = 2, 4, 6, 7, 9.75, 10, 11 and 13, with increasing pressure, on heating. It was concluded that applying uniaxial pressure induces an increase of Tm, and thus has similar effects as the increase of the Ti ion concentration in the PZT system. Results based on nanoregion switching processes under comb…

010302 applied physicsPermittivityMaterials science02 engineering and technologyDielectric021001 nanoscience & nanotechnologyCondensed Matter PhysicsUniaxial pressure01 natural sciencesElectronic Optical and Magnetic MaterialsCharacterization (materials science)IonStress (mechanics)visual_art0103 physical sciencesPeak intensityvisual_art.visual_art_mediumCeramicComposite material0210 nano-technologyFerroelectrics
researchProduct

Microwave properties and structure of La–Ti–Si–B–O glass-ceramics for applications in GHz electronics

2017

Abstract A dielectric bulk glass-ceramic of the La 2 O 3 –TiO 2 –SiO 2 –B 2 O 3 system is developed which is able to fulfill the requirements for dielectric loading-based mobile communication technologies. It is shown that the given dielectric requirements can be fulfilled by glass-ceramic materials without being dependent on ceramic processing techniques. The material exhibited permittivity values of 20  ɛ r Qf τ f τ f material with a Qf value of 9500 GHz and ɛ r  = 21.4 could be achieved at a ceramming temperature T cer  = 870 °C. The material is aimed to provide an alternative to existing, commercially used sintered ceramic materials. Further focus is laid on the investigation of the dom…

010302 applied physicsPermittivityMaterials science02 engineering and technologyDielectricSintered ceramic021001 nanoscience & nanotechnologyMicrostructure01 natural sciencesvisual_art0103 physical sciencesMaterials ChemistryCeramics and Compositesvisual_art.visual_art_mediumDielectric lossCeramicElectronicsComposite material0210 nano-technologyMicrowaveJournal of the European Ceramic Society
researchProduct

Investigation of ZrO[sub 2]–Gd[sub 2]O[sub 3] Based High-k Materials as Capacitor Dielectrics

2010

Atomic layer deposition (ALD) of ZrO 2 ―Gd 2 O 3 nanolaminates and mixtures was investigated for the preparation of a high permittivity dielectric material. Variation in the relative number of ALD cycles for constituent oxides allowed one to obtain films with controlled composition. Pure ZrO 2 films possessed monoclinic and higher permittivity cubic or tetragonal phases, whereas the inclusion of Gd 2 O 3 resulted in the disappearance of the monoclinic phase. Changes in phase composition were accompanied with increased permittivity of mixtures and laminates with low Gd content. Further increase in the lower permittivity Gd 2 O 3 content above 3.4 cat. % resulted in the decreased permittivity…

010302 applied physicsPermittivityMaterials scienceRenewable Energy Sustainability and the EnvironmentAnalytical chemistryEquivalent oxide thickness02 engineering and technologyDielectric021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesSurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsAtomic layer depositionElectric field0103 physical sciencesMaterials ChemistryElectrochemistry0210 nano-technologyCurrent densityLeakage (electronics)High-κ dielectricJournal of The Electrochemical Society
researchProduct

First-principles studies of Ni–Ta intermetallic compounds

2012

National Natural Science Foundation of China [51131002, 50772018]; Program for New Century Excellent Talents in Universities of China [NCET-07-0139]; NSERC; CRC

010302 applied physicsPhase stabilityChemistryIntermetallic02 engineering and technology021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesEngineering physicsElectronic Optical and Magnetic MaterialsInorganic ChemistryCrystallography0103 physical sciencesMaterials ChemistryCeramics and CompositesPhysical and Theoretical Chemistry0210 nano-technologyJournal of Solid State Chemistry
researchProduct

The effect of bias field on the dielectric response of Ba0.95Pb0.05TiO3+Со2О3

2021

The nature of the dielectric response in ferroelectric ceramics Ba0.95Pb0.05TiO3+Со2О3 (BPTC) under the influence of a constant bias field EB in the phase transition region is studied. It is found ...

010302 applied physicsPhase transitionMaterials scienceCondensed matter physicsFerroelectric ceramics02 engineering and technology021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesDielectric responseElectronic Optical and Magnetic Materialschemistry.chemical_compoundchemistry0103 physical sciencesBarium titanate0210 nano-technologyConstant (mathematics)Bias fieldFerroelectrics
researchProduct