Search results for "ELECTRONICS"
showing 10 items of 4340 documents
A simple method for preoperative assessment of the best fitting electrode length in single lead VDD pacing.
1996
For single lead VDD pacing, electrodes with various distances between the lead tip and the floating atrial dipole (AV distance) are available. Using different AV distances allows positioning of the atrial dipole in the mid- to high right atrium, regardless of the size of the right heart. In this position, reliable atrial sensing and rejection of ventricular far-field potentials can be expected. A simple test for the preoperative assessment of the best fitting AV distance in the individual patient was tested. We studied 24 consecutive patients prior to implantation of a VDD pacemaker. With the patient in supine position, a test electrode with an AV distance of 13 cm was taped onto the thorax…
Implementation on NI-SOM sbRIO-9651 and Experimental Validation of Multi-Carrier PWM Techniques for Three-Phase Five Level Cascaded H-Bridge Inverter
2021
Multilevel Power Inverters (MPIs) represent a valid solution to improve the performances of energy production systems from renewable energy sources. Furthermore, the use of novel FPGA control systems allows simplifying the implementation of multicarrier PWM techniques for MPIs with computational benefits. This paper describes the implementation of several multicarrier PWM techniques on NI-SOM sbRIO-9651 for the control of a three-phase five-level cascaded H-bridge inverter. In detail, sbRIO-9651 is a control system in the field of Power Electronics and Drives (PED) programmable in the LabVIEW graphical programming environment. The paper is focused on modulation techniques implementation, te…
First Principles Calculations of Atomic and Electronic Structure of TiAl3+- and TiAl2+-Doped YAlO3
2021
In this paper, the density functional theory accompanied with linear combination of atomic orbitals (LCAO) method is applied to study the atomic and electronic structure of the Ti3+ and Ti2+ ions substituted for the host Al atom in orthorhombic Pbnm bulk YAlO3 crystals. The disordered crystalline structure of YAlO3 was modelled in a large supercell containing 160 atoms, allowing simulation of a substitutional dopant with a concentration of about 3%. In the case of the Ti2+-doped YAlO3, compensated F-center (oxygen vacancy with two trapped electrons) is inserted close to the Ti to make the unit cell neutral. Changes of the interatomic distances and angles between the chemical bonds in the de…
Detuning effects in STIRAP processes in the presence of quantum noise
2011
The Stimulated Raman adiabatic passage (STIRAP) in three-state systems in the presence of quantum noise is considered. A comparison is made between different models, one based on a phenomenological introduction of decays, one traceable back to a microscopic description of the system-environment interaction. Effects related, to off-resonance in the coupling between the involved states are considered.
High Resolution Time Domain Reflectometry for Dielectric State Monitoring in High Voltage Cables
2017
A high resolution Time Domain Reflectometry system has been designed in order to investigate the possibility of measuring with good accuracy the dielectric properties of high voltage cables insulator materials by means of Time-of-Flight measures. The system employs a dedicated Time-To-Digital Converter in order to achieve a time resolution of 90 ps. By exploiting averaging techniques the resolution has been further increased. Experimental results showed the possibility of measuring the dielectric constant with a resolution of 0.03%.
Dehydration of Fructose to 5-HMF over Acidic TiO2 Catalysts
2020
Different solid sulfonic titania-based catalysts were investigated for the hydrothermal dehydration of fructose to 5-hydroxymethylfurfural (5-HMF). The catalytic behavior of the materials was evaluated in terms of fructose conversion and selectivity to 5-HMF. The surface and structural properties of the catalysts were investigated by means of X-ray diffraction (XRD), N2 adsorption isotherms, thermo-gravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and acid capacity measurements. Special attention was focused on the reaction conditions, both in terms of 5-HMF selectivity and the sustainability of the process, choosing water as the solvent. Among the various process condition…
Forming-Free and Self-Rectifying Resistive Switching Effect in Anodic Titanium Dioxide-Based Memristors
2018
The paper presents the resistive switching of electroforming-free Ti/anodic- TiO 2 /Cu memristors. Anodic TiO 2 thin films were prepared by anodizing Ti layers. Microscale devices were fabricated by direct laser-assisted photolithography. Experimental results showed a bipolar and self-rectifying behavior of the devices, which could be useful for crossbar array configurations. Moreover, a gradual resistive switching of the devices in both directions was observed, indicating the presence of multi-level resistance states.
Preface to Special Issue of ChemSusChem on Perovskite Optoelectronics
2017
This Editorial introduces one of two companion Special Issues on "Halide Perovskites for Optoelectronics Applications" in ChemSusChem and Energy Technology following the ICMAT 2017 Conference in Singapore. More information on the other Special Issue can be found in the Editorial published in Energy Technology.
Digitizing data acquisition and time-of-flight pulse processing for ToF-ERDA
2016
A versatile system to capture and analyze signals from multi channel plate (MCP) based time-of-flight detectors and ionization based energy detectors such as silicon diodes and gas ionization chambers (GIC) is introduced. The system is based on commercial digitizers and custom software. It forms a part of a ToF-ERDA spectrometer, which has to be able to detect recoil atoms of many different species and energies. Compared to the currently used analogue electronics the digitizing system provides comparable time-of-flight resolution and improved hydrogen detection efficiency, while allowing the operation of the spectrometer be studied and optimized after the measurement. The hardware, data acq…
Depth profiling of Al2O3 + TiO2 nanolaminates by means of a time-of-flight energy spectrometer
2011
Atomic layer deposition (ALD) is currently a widespread method to grow conformal thin films with a sub-nm thickness control. By using ALD for nanolaminate oxides, it is possible to fine tune the electrical, optical and mechanical properties of thin films. In this study the elemental depth profiles and surface roughnesses were determined for Al2O3 + TiO2 nanolaminates with nominal single-layer thicknesses of 1, 2, 5, 10 and 20 nm and total thickness between 40 nm and 60 nm. The depth profiles were measured by means of a time-of-flight elastic recoil detection analysis (ToF-ERDA) spectrometer recently installed at the University of Jyväskylä. In TOF-E measurements 63Cu, 35Cl, 12C and 4He ions…