Search results for "EPO"
showing 10 items of 6062 documents
Sb-implanted ZnO ultra-thin films
2017
Mild heating of the Zn(C5F6HO2)(2)center dot 2H(2)O center dot CH3(OCH2CH2)(2)OCH3 precursor allowed MOCVD deposition of ZnO films, in a low-pressure horizontal hot-wall reactor, on ITO substrates. The ZnO films were subsequently implanted with Sb ions. XRD measurements provided evidence that they consist of hexagonal, (002) and (101) oriented, crystals. UV-vis spectra showed that the transmittance of these films in the visible region is about 90%. The Sb implanted ZnO film showed a current-voltage characteristic that resembles that of a rectifying diode. This study represents the first example of Sb-implantation in ZnO films obtained by MOCVD.
Un reportage missionario per l’Accademia : la Relatione dal Chile di Antonio Maria Fanelli
2014
Missionario in Cile e Argentina, il gesuita Antonio Maria Fanelli scrive un réportage del suo viaggio per il padre Sigismondo, protagonista della letteratura accademica meridionale del Sei-Settecento.
Transcervical approach for carotid artery stenting with transitory reversal flow: Case report
2021
Introduction Carotid artery stenting (CAS) has been indicated as an alternative to carotid endarterectomy in high risk patients. Sometimes, an aortic arch can be anatomically unfavourable for CAS. Herein we report our experience in a case of CAS with transcervical approach. Presentation of case A 77-year-old male was referred to our hospital for severe subtotal occlusion of the left internal carotid artery. He had a past medical history of radiation to the head and neck for laryngeal cancer. Previous CT-angiography had shown a type III aortic with bovine arch. CAS via transcervical approach was performed with transitory reversal flow during the placement of RX Spider Filter 6 Fr (Medtronic,…
Early structural degeneration of Mitroflow aortic valve: Another issue in addition to the mismatch?
2018
We reported two cases of early structural valve degeneration (SVD) with Mitroflow prosthesis in aortic position in patients above the age of 65 years. Microscopic aspects have been analysed to investigate the intrinsic mechanism of SVD. New techniques to improve the structure and the preservation of this prosthesis are needed in order to reduce potential dangerous early complications.
Real-life assessment of chronic rhinosinusitis patients using mobile technology: the mySinusitisCoach project by EUFOREA
2020
Abstract Background Chronic rhinosinusitis (CRS) is a chronic inflammatory disease associated with a substantial personal and socioeconomic burden. Monitoring of patient‐reported outcomes by mobile technology offers the possibility to better understand real‐life burden of CRS. Methods This study reports on the cross‐sectional evaluation of data of 626 users of mySinusitisCoach (mSC), a mobile application for CRS patients. Patient characteristics of mSC users were analysed as well as the level of disease control based on VAS global rhinosinusitis symptom score and adapted EPOS criteria. Results The mSC cohort represents a heterogeneous group of CRS patients with a diverse pattern of major sy…
Gold based plasmonic stripes co-integrated with low loss Si3N4 platform in aqueous environment
2018
We demonstrate a butt-coupled interface between LPCVD Si 3 N 4 and gold based plasmonic waveguides in aqueous environment, exhibiting 2.3dB coupling loss and 75μm propagation length at 1550nm, towards future employment in biosensing applications.
GROWTH AND PHOTOELECTROCHEMICAL BEHAVIOUR OF ELECTRODEPOSITED ZnO THIN FILMS FOR SOLAR CELLS
2012
Thin zinc oxide films were deposited potentiostatically from zinc nitrate aqueous solutions on ITO substrates. The influence of experimental parameters (temperature, electrolyte concentration, deposition potential) on structure and morphology of films was investigated. Deposited films were generally polycrystalline in structure, even if growth according to preferential planes occurs in certain conditions. The effect of thermal treatments in air at 150 and 350 °C was also studied. In some cases, Cl species were incorporated into deposit by adding zinc chloride to the electrolyte. A photoelectrochemical investigation, performed in neutral solution before and after thermal treatment, gives mor…
Fabrication of metal nano-structures using anodic alumina membranes grown in phosphoric acid solution: Tailoring template morphology
2007
Abstract The influence of experimental parameters on the morphology of the porous structure and on the formation kinetics has been investigated for anodic alumina membranes (AAM) grown in aqueous H 3 PO 4 at 160 V. It was found that pore aspect ratio and membrane porosity on the solution-side surface are influenced by tensiostatic charge, bath temperature and the presence of Al 3+ ions in solution. Morphological and kinetic data, recorded in different conditions, give useful information on the growth mechanism of pore channels in phosphoric acid solution. Nickel nano-structures have been fabricated using AAM as template. Electroless deposition, performed by adding the reducing agent to a su…
ZnO nanorod arrays fabrication via chemical bath deposition: Ligand concentration effect study
2010
A new ligand, N, N, N', N'-tetramethylethylenediamine, has been used to grow ZnO nanorods on silicon substrates via a two steps approach. A preliminary seeding on silicon substrates has been combined with chemical bath deposition using a Zinc acetate - N, N, N', N'-tetramethylethylenediamine aqueous solution. The used diamino ligand has been selected as Zn(2+) complexing agent and the related hydrolysis generates the reacting ions (Zn(2-) and OH(-)) responsible for the ZnO growth. The seed layer has been annealed at low temperature (<200 degrees C) and the ZnO nanorods have been grown on this ZnO amorphous layer. There is experimental evidence that the ligand concentration (ranging from 5 t…
Study of the Chemical Conversion of Aluminum Alloys by Coupling CFDE and EQCM
2004
The ability of the channel flow double electrode (CFDE) technique and electrochemical quartz crystal microbalance (EQCM) for studying in situ chromate phosphate conversion coating on 5182 aluminum alloys was explored. It was first demonstrated that aqueous Cr(VI) can be analyzed quantitatively with the CFDE technique by reduction into Cr(III) on a graphite electrode. Samples used for EQCM were quartz plated by physical vapor deposition using a 5182 alloy target, allowing thin layers of aluminum alloys with a similar chemical composition to be obtained. EQCM was adapted in order to account for the hydrodynamic conditions in an industrial process, by placing the quartz in a flow cell. In orde…