Search results for "Eddy"
showing 10 items of 129 documents
Conformable eddy current array delivery
2016
The external surface of stainless steel containers used for the interim storage of nuclear material may be subject to Atmospherically Induced Stress Corrosion Cracking (AISCC). The inspection of such containers poses a significant challenge due to the large quantities involved; therefore, automating the inspection process is of considerable interest. This paper reports upon a proof-of-concept project concerning the automated NDT of a set of test containers containing artificially generated AISCCs. An Eddy current array probe with a conformable padded surface from Eddyfi was used as the NDT sensor and end effector on a KUKA KR5 arc HW robot. A kinematically valid cylindrical raster scan path…
Eddy current flaw detection with neural network applications
2005
Abstract Eddy current inspection is a fast and effective method for detecting and sizing most of the flaws in conducting materials. The inverse problem solution, i.e., inferencing about possible defect, based on the measurement signal from the eddy current probe, is a difficult task. In this paper an implementation of artificial neural networks for multi-frequency eddy current testing on conducting layers (aluminum, copper) and ferrous tubes has been presented.
Experimental investigations and numerical modelling of the melting process in the cold crucible
2005
PurposeAims to present recent activities in experimental investigations and numerical modelling of the induction cold crucible installation.Design/methodology/approachTemperature and velocity measurements using thermocouples and electromagnetic velocity probes were performed in aluminium melt which was used as a model melt. Measured temperature field and flow pattern were compared with transient 3D calculations based on large eddy simulation (LES) turbulence modelling scheme. Numerical results are in good coincidence with the experimental data.FindingsThe modelling results show that only 3D transient LES is able to model correctly these heat and mass transfer processes.Originality/valueIt i…
<title>Modeling of eddy current sensors</title>
2001
In this paper two models of eddy current sensor have been presented. They are base don a one- and multi-turn coil model. The results of computer simulations present a relation of eddy current density on nonferromagnetic conducting materials versus some parameters viz: a coil radius, frequency of excitation current and conductivity of material.© (2001) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.
Influence of the channel design on the heat and mass exchange of induction channel furnace
2011
PurposeThe purpose of this paper is to present in‐depth numerical modelling of heat and mass exchange in industrial induction channel furnace (ICF).Design/methodology/approachThe turbulent heat and mass exchange in the melt is calculated using a three‐dimensional (3D) electromagnetic model and a 3D transient large eddy simulation method. The simulation model has been verified by flow velocity and temperature measurements, which were carried out using an industrial sized channel inductor operating with Wood's metal as a low temperature model melt.FindingsThe ICF is well‐established for melting, holding and casting in the metallurgical industry. But there are still open questions regarding th…
Numerical studies of the melting process in the induction furnace with cold crucible
2008
PurposeAims to present recent activities in numerical modeling of cold crucible melting process.Design/methodology/approach3D numerical analysis was used for electromagnetic problem and 3D large eddy simulation (LES) method was applied for fluid flow modeling.FindingsThe comparative modeling shows, that higher H/D ratio of the melt is more efficient when total power consumption is considered, but this advantage is held back by higher heat losses through the crucible walls. Also, calculations reveal that lower frequencies, which are energetically less effective, provide better mixing of the melt.Originality/value3D electromagnetic model, which allows to take into account non‐symmetrical dist…
GA-based Off-Line Parameter Estimation of the Induction Motor Model Including Magnetic Saturation and Iron Losses
2020
This paper, starting from recent papers in the scientific literature dealing with Rotating Induction Motor (RIM) dynamic modelling, as a first step, improves its space-vector dynamic model, including both the magnetic saturation and iron losses; The main original aspects of the proposed model are the following: 1) the magnetic saturation of the iron core has been described on the basis of both current versus flux and flux versus current functions, 3) it includes the iron losses, separating them in hysteresis and eddy current ones, 4) it includes the effect of the load on the magnetic saturation. Afterwards, it proposes an off-line technique for the estimation of electrical parameters of thi…
Practical Application of Eddy Currents Generated by Wind
2011
When a conductive material is subjected to time-varying magnetic fluxes, eddy (Foucault) currents are generated in it and magnetic field of opposite polarity as the applied one arises. Due to the internal resistance of the conductive material, the eddy currents will be dissipated into heat (Joule heating). Conventional domestic water heaters utilize gas burners or electric resistance heating elements to heat the water in the tank and substantial part of the energy to use for it is wasted. In this paper the origin of electromagnetic induction heat generated by wind turbine in special heat exchange camera connected to water boiler is discussed and material evaluation performed using mathemati…
Turbulence model effect on heat exchange characteristics through the neutron beam window for European spallation source
2011
PurposeThe purpose of this paper is to compare k‐ω shear‐stress transport (SST) and large eddy simulation (LES) turbulence model application effect on numerical computation of flow pattern and heat exchange characteristics through the neutron beam window region for European spallation source setup model.Design/methodology/approachTransient hydrodynamic and thermal calculations with appropriate heat sources are performed using both turbulence models and typical discrepancies in flow and thermal patterns are discussed, as well as, simulation results are qualitatively compared with experimental data for heat transfer coefficient distribution α at the window surface.FindingsContribution of grea…
Large-Eddy Simulation of Turbulent Flow in an Unbaffled Stirred Tank Driven by a Rushton Turbine
2005
The turbulent flow fieldgeneratedin an unbaffledstirredtank by a Rushton turbine was computedby large-eddy simulation (LES). The Smagorinsky model was used to model the unresolved, or sub-grid, scales. A general purpose CFD code was appropriately modified in order to allow the computation of the sub-gridviscosity andto perform statistics on the computedresults. The numerical predictions were comparedwith the literature results for comparable configurations andwith experimental data obtainedusing particle image velocimetry. A very goodagreement was foundas regards both time-averagedresolv edfield s andturb ulence quantities. 2004 Elsevier Ltd. All rights reserved.