Search results for "FABRICATION"

All-fiber processing of terahertz-bandwidth signals based on cascaded tapered fibers

2013

Tapered single-mode fibers are employed to perform dynamic pulse shaping in a bandwidth of several terahertz. The transfer function of cascaded biconical tapers is controlled by introducing a phase shift into one of them through mechanical stretching. It is a simple and low-cost technique with potential to process signals with bandwidths as large as those allocated by standard optical fiber while introducing little degradation. Femtosecond pulses are shaped to prove the concept. (C) 2013 Optical Society of America

Génération de supercontinuum infrarouge et enjeux de vieillissement au sein de fibres optiques à coeur suspendu hautement non linéaires en verre de c…

2014

The work reported in this thesis deals with the fabrication of suspended core chalcogenide microstructured optical fibers (MOFs) for supercontinuum generation (SCG) beyond 6 μm. In this context, As2S3-based suspended-core MOFs were fabricated under vacuum, and loss threshold of 1-2 dB/m at 2.9µm were systematically registered. In addition, MOFs were designed with core diameter ranging from 1.5 to 3.5µm, allowing therefore to control the MOF's dispersive properties and to shift corresponding zero dispersion wavelength to 2.0-2.5 µm range. SCG experiments were performed by pumping the fabricated MOFs in their anomalous dispersion regime by means of tunable femtosecond laser source. Simultaneo…

Improving Long Term Stability of Pure Formamidinium Perovskite Solar Cells by Ambient Air Additive Assisted Fabrication

2021

Frequency comb generation in whispering gallery mode silica microsphere resonators

2021

Optical frequency combs (OFC) using different kinds of whispering-gallery-mode (WGM) microresonators have already shown different applications and especially their applications in fiber optical communication systems as replacements of laser-arrays. For this application the free spectral range (FSR) of 200 GHz or less is desirable. Besides the fabrication material for microspheres, the resonator radius can be modified to change the FSR. In this paper use of silica microspheres for OFC represents an inexpensive alternative over the other microcombs: microring, microdisk, and microtoroid. We experimentally present a microsphere fabrication process from a different kind of silica (SiO2) fibers …

Plasma Etching and Integration with Nanoprocessing

2009

This chapter introduces plasma etching—an extensive and perhaps the most widely used micro- and nanoprocessing method both in industry and in research and development laboratories worldwide. The emphasis is on the practical methods in plasma etching and reactive ion etching when used for submicron and nanoscale device fabrication. The principles of plasma etching and reactive ion etching equipment for sample fabrication will be introduced.

Fabrication of Bismuth Absorber Arrays for NTD-Ge Hard X-ray Microcalorimeters

2020

The high-spectral-resolution detection of hard X-rays (E > 20 keV) is a challenging and nearly unexplored area in space astrophysics. Traditionally hard X-ray detectors present moderate spectral resolutions, although few tens of eV one could open new frontiers in the study of nuclear processes and high-temperature plasma dynamics in energetic processes. This can be achieved by using cryogenic microcalorimeters. Within a research activity aimed at developing arrays of neutron transmutation-doped germanium (NTD-Ge) microcalorimeters for the high-spectral-resolution detection (about 50 eV@60 keV) of hard X-rays (20 keV < E<100 keV), we developed an electroplating process to fabricate …

Microstructure-process relationship and reactivity at the nanoscale : a molecular dynamics study of Ni, Ni-Al, and Ti-Al metallic systems

2023

The process-microstructure relationship is central in materials science because the microstructure will determine the properties of the materials developed by the processes. In our work, we focused on different metallurgical processes by adopting a description at the atomic scale. This approach allows us to detect the elementary mechanisms that are at the origin of the observed microstructures without having to postulate macroscopic mechanisms or estimate the associated parameters. In this respect, molecular dynamics simulations provide a tool for "in-situ" observation of metallic systems as long as an atomic interaction potential is available. The originality of our approach consists in mo…

Fabrication and Modelling of Three-Dimensional Sub-kelvin Phononic Crystals

2012

We have investigated the fabrication and computational modelling of threedimensional phononic crystals for the observation of full band gaps for thermal phonons at sub-kelvin temperatures. Self-assembled arrays of monodisperse polystyrene nanospheres have been fabricated using a vertical deposition technique. Optimal conditions for increasing crystal domain size and crystalline quality have been studied. In addition, the phononic band structure has been computed using the finite element method for the simple cubic lattice. The dependence of band structure on contact area between spheres has also been studied. For small enough contact area a large band gap is observed, predicting a strong in…

Microfabrication of hybrid fluid membrane for microengines

2015

International audience; This paper describes the microfabrication and dynamic characterization of thick membranes providing a technological solution for microengines. The studied membranes are called hybrid fluid-membrane (HFM) and consist of two thin membranes that encapsulate an incompressible fluid. This work details the microelectromechanical system (MEMS) scalable fabrication and characterization of HFMs. The membranes are composite structures based on Silicon spiral springs embedded in a polymer (RTV silicone). The anodic bonding of multiple stacks of Si/glass structures, the fluid filling and the sealing have been demonstrated. Various HFMs were successfully fabricated and their dyna…

Normal metal - insulator - superconductor thermometers and coolers with titanium-gold bilayer as the normal metal

2018

We have fabricated superconductor - insulator - normal metal - insulator - superconductor (SINIS) tunnel junctions in which Al acts as the superconductor, AlOx is the insulator, and the normal metal consists of a thin Ti layer (5 nm) covered with a thicker Au layer (40 nm). We have characterized the junctions by measuring their current-voltage curves between 60 mK and 750 mK. For comparison, the same measurements have been performed for a SINIS junction pair whose normal metal is Cu. The Ti-Au bilayer decreases the SINIS tunneling resistance by an order of magnitude compared to junctions where Cu is used as normal metal, made with the same oxidation parameters. The Ti-Au devices are much mo…