Search results for "Fiber"

showing 10 items of 2343 documents

Analysis of an interferometric optical fibre detection technique applied to silicon vibrating sensors

1987

A simple and accurate analysis of a single-mode optical fibre interferometric displacement detection technique is resented. This analysis is in good agreement with experimental measurements, and shows that angular alignment between the fibre and the sensor is the most critical parameter.

ImaginationMaterials scienceOptical fiberSiliconbusiness.industrymedia_common.quotation_subjectchemistry.chemical_elementÒpticaVibracióDisplacement (vector)law.inventionVibrationInterferometryOpticsCritical parameterchemistrylawVibration measurementElectrical and Electronic Engineeringbusinessmedia_common
researchProduct

Correction: Recovery from Toxic-Induced Demyelination Does Not Require the NG2 Proteoglycan.

2018

[This corrects the article DOI: 10.1371/journal.pone.0163841.].

ImmunologyGene ExpressionMouse ModelsCell MigrationResearch and Analysis MethodsPathology and Laboratory MedicineCorpus CallosumDirected Cell MigrationModel OrganismsNerve FibersSigns and SymptomsAnimal CellsDiagnostic MedicineMedicine and Health SciencesGeneticsImmune ResponseNeuronsInflammationChemotaxisBiology and Life SciencesBrainCell DifferentiationAnimal ModelsCell BiologyAxonsCell MotilityCellular NeuroscienceCellular TypesAnatomyResearch ArticleDevelopmental BiologyNeurosciencePloS one
researchProduct

Carbon Nanotubes: In-Situ Growth of Ultrathin Films of NiFe-LDHs: Towards a Hierarchical Synthesis of Bamboo-Like Carbon Nanotubes (Adv. Mater. Inter…

2014

In situBambooCarbon filmMaterials scienceMechanics of MaterialsCarbon nanofiberlawMechanical EngineeringNanotechnologyCarbon nanotubeThin filmlaw.inventionAdvanced Materials Interfaces
researchProduct

Ultrastructure of the Interlamellar Membranes of the Nacre of the Bivalve Pteria hirundo, Determined by Immunolabelling.

2015

The current model for the ultrastructure of the interlamellar membranes of molluscan nacre imply that they consist of a core of aligned chitin fibers surrounded on both sides by acidic proteins. This model was based on observations taken on previously demineralized shells, where the original structure had disappeared. Despite other earlier claims, no direct observations exist in which the different components can be unequivocally discriminated. We have applied different labeling protocols on non-demineralized nacreous shells of the bivalve Pteria. With this method, we have revealed the disposition and nature of the different fibers of the interlamellar membranes that can be observed on the …

In situPlateletsBivalvesScanning electron microscopeShell (structure)Mineralogylcsh:MedicineChitinMatrix (biology)chemistry.chemical_compoundChitinAnimal ShellsMembrane proteinsAnimalsFiberlcsh:ScienceNacreFluorescence microscopyMultidisciplinaryMicroscopy Confocallcsh:RfungiProteasesMolluscs[ SDV.IB.BIO ] Life Sciences [q-bio]/Bioengineering/BiomaterialsBivalviaMembraneAragonitechemistryBiophysicsUltrastructureMicroscopy Electron Scanninglcsh:QResearch ArticlePloS one
researchProduct

Infracyanine Green vs. Brilliant Blue G in Inverted Flap Surgery for Large Macular Holes: A Long-Term Swept-Source OCT Analysis

2020

Background and Objectives: To compare the long-term toxicity of infracyanine green (IFCG) to brilliant blue G (BBG) in inverted internal limiting membrane flap surgery (I-ILMFS) for large, full-thickness macular holes (FTMHs). Materials and Methods: Prospective randomized study including 39 eyes with &ge

Indocyanine GreenMalemedicine.medical_specialtyDistance visual acuitygenetic structuresswept-source OCTlarge macular holeNerve fiber layerContrast MediaInfracyanine greenRetinaSurgical FlapsArticlechemistry.chemical_compoundRosaniline DyesmedicineHumansExternal limiting membranebrilliant blue GAgedAged 80 and overlcsh:R5-920inverted flap surgerySettore MED/30 - Malattie Apparato Visivobusiness.industryInternal limiting membraneRetinalGeneral MedicineMiddle AgedRetinal Perforationseye diseasesSurgeryGanglionTreatment Outcomemedicine.anatomical_structureInfracyanine greenchemistryFemalebusinesslcsh:Medicine (General)Infracyanine green; brilliant blue G; inverted flap surgery; large macular hole; swept-source OCTTomography Optical CoherenceBrilliant blue GMedicina
researchProduct

Solid-State Pyrolyses of Metal Phthalocyanines: A Simple Approach towards Nitrogen-Doped CNTs and Metal/Carbon Nanocables

2006

Solid-state pyrolysis of organometallic precursors has emerged as an alternative method for preparing carbon nanostructures such as carbon nanotubes (CNT) and carbon anions. The morphology of the tubes can be controlled by the nature of the precursors and the pyrolysis procedures, and micrometer long nanotubes, composed of metal carbide wires encased in a graphitic sheath. Cobalt phthalocyanine (CoPc) as well as iron phthalocyanine were pyrolyzed at different temperatures to obtain CNTs. HRTEM and energy-dispersion X-Ray analysis disclosed that the core consisted of long, iron-containing single crystals and that the core was fully surrounded by crystallized graphic carbon. Iron-filled carbo…

IndolesMaterials scienceNitrogenSelective chemistry of single-walled nanotubesMetal Nanoparticleschemistry.chemical_elementElectronsNanotechnologyCarbon nanotubeIsoindolesCarbidelaw.inventionBiomaterialschemistry.chemical_compoundMicroscopy Electron TransmissionX-Ray DiffractionlawElectrochemistryNanotechnologyGeneral Materials ScienceNanotubes CarbonCarbon nanofiberTemperatureGeneral ChemistryFerrocenechemistryChemical engineeringSpectrophotometryFrit compressionMicroscopy Electron ScanningCarbonPyrolysisBiotechnologySmall
researchProduct

Filtration process cost in submerged anaerobic membrane bioreactors (AnMBRs) for urban wastewater treatment

2015

[EN] The objective of this study was to evaluate the effect of the main factors affecting the cost of the filtration process in submerged anaerobic membrane bioreactors (AnMBRs) for urban wastewater (UWW) treatment. Experimental data for CAPEX/OPEX calculations was obtained in an AnMBR system featuring industrial-scale hollow-fiber (HF) membranes. Results showed that operating at J(20) slightly higher than the critical flux results in minimum CAPEX/OPEX. The minimum filtration process cost ranged from Euro0.03 to Euro0.12 per m(3), mainly depending on SGD(m) (from 0.05 to 0.3 m(3)m(-2)h(-1)) and MLSS (from 5 to 25 gL-1). The optimal SGD(m) resulted in approx. 0.1 m(3)m(-2)h(-1).

Industrial-scale hollow-fiber membranesINGENIERIA HIDRAULICAGeneral Chemical EngineeringFiltration and Separation02 engineering and technology010501 environmental sciences01 natural scienceslaw.invention020401 chemical engineeringlawBioreactorUrban wastewater (UWW)0204 chemical engineeringFiltrationTECNOLOGIA DEL MEDIO AMBIENTE0105 earth and related environmental sciencesChemistryProcess Chemistry and TechnologySubmerged anaerobic MBR (AnMBR)General ChemistryPulp and paper industryMembraneWastewaterProcess costingSewage treatmentBiochemical engineeringAnaerobic exerciseCAPEXOPEX
researchProduct

Immunfluorescence study of neuropeptides in identified neurons of the rat auditory superior olivary complex.

1999

The present study was conducted to investigate the distribution and immunohistochemical characteristics of ascending and descending projection neurons of the rat superior olivary complex (SOC), a group of interrelated brainstem nuclei. Ascending neurons were identified by injection of cholera toxin B subunit (CTB) into the central nucleus of the inferior colliculus (IC), descending neurons were labeled by application of Fluoro-Gold (FG) into the scala tympani of the cochlea, ipsilaterally to the IC injection. In accordance with the literature, we observed neurons innervating the IC located in the lateral superior olivary nucleus (LSO) and dorsal periolivary groups (DPO) on both sides, in th…

Inferior colliculusMaleHistologyAuditory PathwaysStilbamidinesTyrosine 3-MonooxygenaseCalcitonin Gene-Related PeptidePopulationNeuropeptideFluorescent Antibody TechniqueBiologyOlivary NucleusSubstance PAxonal TransportFunctional LateralityPathology and Forensic MedicineRats Sprague-DawleyNerve Fibersotorhinolaryngologic diseasesmedicineTrapezoid bodyAnimalseducationFluorescent DyesNeuronseducation.field_of_studyCell BiologyAnatomyRetrograde tracingInferior ColliculiCochleaRatsmedicine.anatomical_structurenervous systemSuperior olivary complexBrainstemNeuroscienceNucleusCell and tissue research
researchProduct

Empirical Equations for the Direct Definition of Stress–Strain Laws for Fiber-Section-Based Macromodeling of Infilled Frames

2018

Equivalent strut macromodels are largely used to model the influence of infill walls in frame structures due to their simplicity and effectiveness from a computational point of view. Despite these advantages, which are fundamental to carrying out seismic simulation of complex structures, equivalent struts are phenomenological models and therefore have to conventionally account for the influence of really large amounts of geometrical and mechanical variables with a relatively simple inelastic response. Mechanical approaches, generally used to evaluate the force-displacement curve of a strut, are based on hypothesizing the damage mechanism that will occur for an infill-frame system subject to…

Infilled framesComputer science0211 other engineering and technologies020101 civil engineering02 engineering and technologyFiber section; Finite element modeling (FEM); Infilled frames; Masonry; OpenSees; Reinforced concrete; Mechanics of Materials; Mechanical Engineering0201 civil engineeringOpenSeesInfillPoint (geometry)MasonryOpenSee021110 strategic defence & security studiesbusiness.industryFiber (mathematics)OpenSeesMechanical EngineeringStress–strain curveFrame (networking)Structural engineeringFiber sectionFinite element modeling (FEM)MasonryStrength of materialsReinforced concreteSettore ICAR/09 - Tecnica Delle CostruzioniMechanics of MaterialsbusinessInfilled frameJournal of Engineering Mechanics
researchProduct

Definition of a fiber macro-model for nonlinear analysis of infilled frames

2017

A common way to model infill-frame interaction is the use equivalent strut macromodels. In most cases these are compression only resistant truss elements defined with a multi-linear axial-force / axial-displacement law. The main difficulty in using this approach is to correctly calibrate such a force-displacement curve (slope of ascending and post-peak branches, critical yielding, peak and residual forces) because of the large number of variables (mechanical and elastic properties of materials) and the different possible damage mechanisms activated for the frame-infill system. Another possible way is using fiber-section elements as diagonal struts. In this case the force-displacement law is…

Infilled framesComputer scienceCorrelations; FEM; Fiber-section elements; Infilled frames; Macromodelling; Micromodelling; Stress-strain; Computational Mathematics; Computers in Earth Sciences; Geotechnical Engineering and Engineering GeologyStress-strainComputers in Earth SciencesA fibersMacroMicromodellingFEMCorrelationsbusiness.industryStress–strain curveComputational mathematicsStructural engineeringGeotechnical Engineering and Engineering GeologyFiber-section elementFinite element methodCorrelationInfilled framesComputational MathematicsNonlinear systemSettore ICAR/09 - Tecnica Delle CostruzionibusinessFiber-section elementsInfilled frameMacromodelling
researchProduct