Search results for "Fuel Cell"

PEM electrolyzer characterization with carbon-based hardware and material sets

2021

Abstract The research and development of proton exchange membrane water electrolysis (PEMWE) is an upcoming and growing area due to a rising interest in hydrogen as an energy carrier. Operating conditions are harsher than in a fuel cell system, particularly because the potentials required for the oxygen evolution reaction are significantly higher. In commercial water electrolysis systems, this is compensated by typically using titanium material sets that are often protected against oxidation through coating processes. Such material choices make small scale research hardware and porous transport layers expensive and difficult to source. In this work, we show that the stability of traditional…

Strontium and iron-doped barium cobaltite prepared by solution combustion synthesis: exploring a mixed-fuel approach for tailored intermediate temper…

2013

Ba0.5Sr0.5Co0.8Fe0.2O3-? (BSCF) powders were prepared by solution combustion synthesis using single and double fuels. The effect of the fuel mixture on the main properties of this well-known solid oxide fuel cell cathode material with high oxygen ion and electronic conduction was investigated in detail. Results showed that the fuel mixture significantly affected the area-specific resistance of the BSCF cathode materials, by controlling the oxygen deficiency and stabilizing the Co2+ oxidation state. It was demonstrated that high fuel-to-metal cations molar ratios and high reducing power of the combustion fuel mixture are mainly responsible for the decreasing of the area-specific resistance o…

First principles calculations of oxygen reduction reaction at fuel cell cathodes

2020

This study was partly supported by M-ERA-NET project SunToChem (EK, YM). The computer resources were provided by Stuttgart Super-computing Center (Project DEFTD 12939). Authors thank E. Heifets, M. M. Kuklja, M. Arrigoni, D. Morgan, R. Evarestov, and D. Gryaznov for fruitful discussions.

Micro bial fuel cell with Ni-Co cathode

2017

Effect of metallacarborane salt H[COSANE] doping on the performance properties of polybenzimidazole membranes for high temperature PEMFCs

2020

[EN] In this paper, a series of composite proton exchange membranes comprising a cobaltacarborane protonated H[Co(C2B9H11)(2)] named (H[COSANE]) and polybenzimidazole (PBI) for a high temperature proton exchange membrane fuel cell (PEMFC) is reported, with the aim of enhancing the proton conductivity of PBI membranes doped with phosphoric acid. The effects of the anion [Co(C2B9H11)(2)] concentration in three different polymeric matrices based on the PBI structure, poly(2,2 '-(m-phenylene)-5,5 '-bibenzimidazole) (PBI-1), poly[2,2 '-(p-oxydiphenylene)-5,5 '-bibenzimidazole] (PBI-2) and poly(2,2 '-(p-hexafluoroisopropylidene)-5,5 '-bibenzimidazole) (PBI-3), have been investigated. The conducti…

First principles modeling of Ag adsorption on the LaMnO3 (001) surfaces

2015

Abstract Doping of oxide surfaces with Ag atoms could improve their catalytic properties, e.g. for solid oxide fuel cell and oxygen permeation membrane applications. We present results of the ab initio calculations of Ag adsorption on the LaMnO 3 (LMO) (001) surfaces. The energetically most favorable adsorption sites for low coverage of Ag atoms and monolayer on both MnO 2 - and LaO-terminations have been determined. The electron charge transfer between Ag and substrate and interatomic distances have been analyzed. The Ag atom migration along the MnO 2 surface is ~ 0.5 eV which could lead to a fast clustering of adsorbates at moderate temperatures whereas the adhesion energy of silver monol…

Characterization process to measure the electrical contact resistance of Gas Diffusion Layers under mechanical static compressive loads

2016

AEM2016. International conference on Advanced Energy Materials, University of Surrey, Guildford, ROYAUME-UNI, 12-/09/2016 - 14/09/2016; Recent research has identified the mechanical properties of the fuel cell internal components (in particular, the Gas Diffusion Layers - GDLs) as key-parameters to obtain high final performances of the generator. The mechanical compression modulus of these components, the stability of their mechanical properties with respect to temperature and humidity, and their ability to interact with water have an impact on the electrical contact resistances in the stack and, by consequence, on the overall performance of the electric generator. Reducing the losses by co…

Enhanced Conductivity of Composite Membranes Based on Sulfonated Poly(Ether Ether Ketone) (SPEEK) with Zeolitic Imidazolate Frameworks (ZIFs)

2018

The zeolitic imidazolate frameworks (ZIFs) ZIF-8, ZIF-67, and a Zn/Co bimetallic mixture (ZMix) were synthesized and used as fillers in the preparation of composite sulfonated poly(ether ether ketone) (SPEEK) membranes. The presence of the ZIFs in the polymeric matrix enhanced proton transport relative to that observed for SPEEK or ZIFs alone. The real and imaginary parts of the complex conductivity were obtained by electrochemical impedance spectroscopy (EIS), and the temperature and frequency dependence of the real part of the conductivity were analyzed. The results at different temperatures show that the direct current (dc) conductivity was three orders of magnitude higher for composite …

Wood and Black Liquor-Based N-Doped Activated Carbon for Energy Application

2021

The research was funded by the Latvian Council of Science project “Nanostructured Nitrogenated Carbon Materials as Promoters in Energy Harvesting and Storage Technologies”, project No LZP-2018/1-0194, “New biomass origin materials hybrid carbon composites for energy storage” project No LZP-2020/2-0019 and postdoc project “Nitrogen and phosphorus-containing biomass based activated carbons for fuel cells and supercapacitors” project No 1.1.1.2/VIAA/4/20/596.

Nanoscale membrane electrode assemblies based on porous anodic alumina for hydrogen–oxygen fuel cell

2007

In this paper, we demonstrate that nanoscale membrane electrode assemblies, functioning in a H 2/O 2 fuel cell, can be fabricated by impregnation of anodic alumina porous membranes with Nafion® and phosphotungstic acid. Porous anodic alumina is potentially a promising material for thin-film micro power sources because of its ability to be manipulated in micro-machining operations. Alumina membranes (Whatman, 50 μm thick, and pore diameters of 200 nm) impregnated with the proton conductor were characterized by means of scanning electron microscopy, X-ray diffraction, and thermal analysis. The electrochemical characterization of the membrane electrode assemblies was carried out by recording t…