Search results for "HOT"

showing 10 items of 14851 documents

Deep insight into electron transport and photovoltaic parameters in DSSCs

2019

Dye-sensitized solar cells (DSSCs) based on titanium (IV) oxide (TiO2) nanoparticles and nanotubes (NTs) with different weight ratios and phase compositions were fabricated. The obtained nanostructures were investigated using X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy and ultraviolet–visible spectroscopy. Current–voltage measurements and electrochemical impedance spectroscopy were used to investigate the electron transport and photovoltaic performance of DSSCs. An increase of 14% in cell efficiency was achieved by introducing 10 wt% NTs. In this configuration, high dye loading is ensured and substantial improvement in electron transport efficie…

010302 applied physicsNanostructureMaterials sciencePhotovoltaic systemOxidechemistry.chemical_elementNanoparticle02 engineering and technology021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesElectron transport chainchemistry.chemical_compoundchemistryChemical engineeringPhase (matter)0103 physical sciencesGeneral Materials Science0210 nano-technologyTitaniumEmerging Materials Research
researchProduct

Hydrodynamic Modeling of Transport and Noise Phenomena in Bipolar Two-Terminal Silicon Structures

1998

International audience

010302 applied physicsNoise temperatureMaterials scienceSiliconMechanical EngineeringShot noisechemistry.chemical_element02 engineering and technology021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciences[SPI.TRON]Engineering Sciences [physics]/Electronics[PHYS.PHYS.PHYS-COMP-PH]Physics [physics]/Physics [physics]/Computational Physics [physics.comp-ph]NoisechemistryTerminal (electronics)Mechanics of Materials0103 physical sciencesElectronic engineeringGeneral Materials Science[PHYS.COND]Physics [physics]/Condensed Matter [cond-mat]0210 nano-technologyComputingMilieux_MISCELLANEOUSMaterials Science Forum
researchProduct

Ion track template technology for fabrication of CdTe and CdO nanocrystals

2020

Abstract CdTe and CdO nanocrystals were synthesized by chemical deposition into a-SiO2/n-Si ion track template formed by 200 MeV Xe ion irradiation with the fluence of 108 ions/cm2. Depending on the temperature of the solution CdTe + CdO and single-phase CdO with a hexagonal crystal structure were obtained, respectively. The study of the current – voltage characteristics of the obtained structure with the single-phase CdO allows us to estimate the number of grain boundaries and the height of the potential barrier, as well as the n-type conductivity.

010302 applied physicsNuclear and High Energy PhysicsMaterials scienceIon trackPhysics::Medical PhysicsAnalytical chemistry02 engineering and technologyConductivity021001 nanoscience & nanotechnology01 natural sciencesFluenceCadmium telluride photovoltaicsIonCondensed Matter::Materials ScienceNanocrystal0103 physical sciencesRectangular potential barrierGrain boundary0210 nano-technologyInstrumentationNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
researchProduct

Shallow and deep trap levels in X-ray irradiated β-Ga2O3: Mg

2019

Abstract The results of the investigation of thermostimulated luminescence (TSL) and photoconductivity (PC) of the X-ray irradiated undoped and Mg2+ doped β-Ga2O3 single crystals are presented. Three low-temperature peaks at 116 K, 147 K and 165 K are observed on the TSL glow curves of undoped crystals. The high-temperature TSL peaks at 354 K and 385 K are dominant in Mg2+ doped crystals. The correlation between doping with Mg2+ ions and the local energy levels of the intrinsic structural defects of β-Ga2O3, which are responsible for the TSL peaks and PC, is established. The nature of TSL peaks and the appropriate photoconductivity excitation bands are discussed.

010302 applied physicsNuclear and High Energy PhysicsMaterials sciencePhotoconductivityDopingAnalytical chemistryX-ray02 engineering and technologyActivation energy021001 nanoscience & nanotechnology01 natural sciencesIon0103 physical sciencesIrradiation0210 nano-technologyLuminescenceInstrumentationSingle crystalNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
researchProduct

EPR and optical spectroscopy of neutron-irradiated Gd3Ga5O12 single crystals

2020

Abstract In this paper, we have performed comparative analysis of EPR, optical absorption (OA) and luminescence spectra for a series of Gd3Ga5O12 (GGG) single crystals irradiated with fast neutrons with fluencies varied from 1016 to 1020n/cm2. In a crystal irradiated with the maximum neutron fluence, the EPR spectra demonstrated the formation of several paramagnetic defects. In particular, EPR spectrum shows a strong resonance at (effective) g ≈ 1.4 with practically isotropic behavior in the crystal rotation around the [1 1 1] direction (magnetic field being perpendicular to [1 1 1]) and several weaker lines in the g ≈ 1.1–2.6 region, which show more pronounced angular dependences. While th…

010302 applied physicsNuclear and High Energy PhysicsMaterials sciencePhotoluminescenceResonance02 engineering and technology021001 nanoscience & nanotechnology01 natural sciencesMolecular physicsNeutron temperaturelaw.inventionCrystalParamagnetismlaw0103 physical sciences0210 nano-technologySpectroscopyLuminescenceElectron paramagnetic resonanceInstrumentationNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
researchProduct

Comparison of Single Event Transients Generated at Four Pulsed-Laser Test Facilities-NRL, IMS, EADS, JPL

2012

Four pulsed-laser single-event effects systems, differing in wavelength and pulse width, were used to generate single event transients in a large-area silicon photodiode and an operational amplifier (LM124) to determine how transient amplitude and charge collection varied among the different systems. The optical wavelength and the focused spot size are the primary factors influencing the resultant charge density profile. In the large-area photodiode the transients can be distorted by high charge-injection densities that occur for tightly focused, higher energy optical pulses. When the incident laser-pulse energies are corrected for reflection losses and photon efficiency, with collection de…

010302 applied physicsNuclear and High Energy PhysicsMaterials sciencePhotonta114010308 nuclear & particles physicsbusiness.industryTransistorLaser01 natural sciences7. Clean energy[SPI.TRON]Engineering Sciences [physics]/Electronicslaw.inventionPhotodiodeSemiconductor laser theoryWavelengthOpticsNuclear Energy and Engineeringlaw0103 physical sciencesOptoelectronicsTransient (oscillation)Electrical and Electronic EngineeringbusinessPulse-width modulationIEEE Transactions on Nuclear Science
researchProduct

The peculiarities of the radiation damage accumulation kinetics in the case of defect complex formation

2020

Abstract The kinetics of radiation defect accumulation under irradiation by heavy particles is theoretically analysed under the assumption of defect complex genesis, particularly, the ones of anion and cation vacancies. The obtained analytical mathematical model and revealed peculiarities of radiation dose dependencies can be used for analysis of the experimental results for different crystalline materials for solid-state electronics and photonics.

010302 applied physicsNuclear and High Energy PhysicsMaterials sciencebusiness.industryComplex formationRadiation doseKinetics02 engineering and technologyRadiation021001 nanoscience & nanotechnologyPhotochemistry01 natural sciencesIon0103 physical sciencesRadiation damageIrradiationPhotonics0210 nano-technologybusinessInstrumentationNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
researchProduct

Depth profiles of damage creation and hardening in MgO irradiated with GeV heavy ions

2019

This work has been performed within the framework of the EUROfusion Enabling Research project: ENR-MFE19.ISSP-UL-02 “Advanced experimental and theoretical analysis of defect evolution and structural disordering in optical and dielectric materials for fusion applications”. The views and opinions expressed herein do not necessarily reflect those of the European Commission.

010302 applied physicsNuclear and High Energy PhysicsPhotoluminescenceMaterials scienceDislocations02 engineering and technologyNanoindentation021001 nanoscience & nanotechnologySwift heavy ions01 natural sciencesMgO crystalsNanoindentationIonCondensed Matter::Materials ScienceIndentation0103 physical sciencesHardening (metallurgy):NATURAL SCIENCES:Physics [Research Subject Categories]IrradiationComposite materialDislocation0210 nano-technologySpectroscopyInstrumentationPhotoluminescenceNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
researchProduct

Radiation-induced defects in sapphire single crystals irradiated by a pulsed ion beam

2020

Abstract The luminescence and thermal stability of defects formed in α-Al2O3 single crystals after powerful (300 keV) pulsed irradiation with C+/H+ ion beam were investigated. It was found by measuring of optical density, photoluminescence, and pulsed cathodoluminescence that ion irradiation induces both single F-, F+-centers and F2-type aggregate centers. An intense thermoluminescence band with a complex shape was observed in the broad temperature range of 350–700 K, its intensity decreases with increasing of the energy density of the ion beam. The thermal stability of the F-type defects produced in α-Al2O3 after irradiation with a pulsed ion beam is comparable to that in neutron-irradiate…

010302 applied physicsNuclear and High Energy PhysicsPhotoluminescenceMaterials scienceIon beamAnalytical chemistryCathodoluminescence02 engineering and technologyAtmospheric temperature range021001 nanoscience & nanotechnology01 natural sciencesThermoluminescenceIon0103 physical sciencesIrradiation0210 nano-technologyLuminescenceInstrumentationNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
researchProduct

Mixed-Mode Operation of Hybrid Phase-Change Nanophotonic Circuits

2016

Phase change materials (PCMs) are highly attractive for nonvolatile electrical and all-optical memory applications because of unique features such as ultrafast and reversible phase transitions, long-term endurance, and high scalability to nanoscale dimensions. Understanding their transient characteristics upon phase transition in both the electrical and the optical domains is essential for using PCMs in future multifunctional optoelectronic circuits. Here, we use a PCM nanowire embedded into a nanophotonic circuit to study switching dynamics in mixed-mode operation. Evanescent coupling between light traveling along waveguides and a phase-change nanowire enables reversible phase transition b…

010302 applied physicsPhase transitionMaterials scienceGeTe nanowireMechanical EngineeringAll-optical switchingNanowireNanophotonicsBioengineeringNanotechnology02 engineering and technologyGeneral Chemistry021001 nanoscience & nanotechnologyCondensed Matter PhysicsSettore ING-INF/01 - Elettronica01 natural sciencesAmorphous solidCoupling (electronics)0103 physical sciencesGeneral Materials ScienceTransient (oscillation)Nanophotonic circuit0210 nano-technologyUltrashort pulseElectronic circuitNano Letters
researchProduct