Search results for "High-density"
showing 10 items of 139 documents
Should low high-density lipoprotein cholesterol (HDL-C) be treated?
2014
The first observations linking a low serum level of HDL-C to increased risk for cardiovascular disease were made over 50 years ago. High serum levels of HDL-C appear to protect against the development of atherosclerotic disease, while low serum levels of this lipoprotein are among the most important predictors of atherosclerotic disease in both men and women and people of all racial and ethnic groups throughout the world. It has long been assumed that therapeutic interventions targeted at raising HDL-C levels would lower risk for such cardiovascular events as myocardial infarction, ischemic stroke, and death. Even after five decades of intensive investigation, evidence to support this assum…
No Improvement of High-Density Lipoprotein (HDL) Vasorelaxant Effect Despite Increase in HDL Cholesterol Concentration in Type 2 Diabetic Patients Tr…
2014
Abstract Context: High-density lipoproteins (HDLs) from type 2 diabetic patients are unable to counteract the inhibitory effect of oxidized low-density lipoproteins (ox-LDLs) on vasorelaxation. We hypothesized that glitazones, which improve glycemic control and dyslipidemia, could correct this abnormality. Objectives and Design: We compared the ability of HDL from controls (n = 12) and from type 2 diabetic patients before and after 6 months of treatment with either rosiglitazone (n = 11) or pioglitazone (n = 8) to counteract the inhibitory effect of ox-LDL on vasodilatation of rabbit aorta rings. Results: Rosiglitazone induced a decrease in hemoglobin A1c (7.7% ± 1.1% vs 9.8% ± 1.0%, P = .0…
Effect of nano zinc oxide as UV stabilizer on the weathering performance of wood-polyethylene composite
2016
Abstract In this study, the effect of using nano-sized zinc oxide (ZnO) particles on the enhancement if the degradation resistance of wood-high density polyethylene (HDPE) composite was investigated through artificial weathering. Samples with different amounts of ZnO mixing ratio (0, 1, 2, and 4 wt%) were manufactured using an internal mixer followed by compression molding. The prepared samples were then exposed to the artificial weathering process in a QUV weatherometer. The weathering behavior of samples was characterized using tensile strength, contact angle analysis, colorimetry, ATR-FTIR spectroscopy and FE-SEM. The results indicated that the amount of surfaces crack, tensile strength …
Amorphous hydrogenated carbon (a-C:H) depositions on polyoxymethylene: Substrate influence on the characteristics of the developing coatings
2016
Abstract After oxygen plasma treatment polyoxymethylene (POM) material was exposed to acetylene plasma to progressively deposit two different types of amorphous hydrogenated carbon (a-C:H) films. Radio frequency plasma-enhanced chemical vapor deposition (RF-PECVD) was used to generate both plasma processes. The surface morphology of the coated samples has been investigated by atomic force microscopy (AFM) and their chemical composition by Diffusive Reflectance Infrared Fourier Transform (DRIFT) and Raman spectroscopy. Results revealed the absence of a solid interlayer formation between the a-C:H films and POM. The in sequence exposure of oxygen and acetylene plasma on POM substrate prevents…
Evolution of the sp2 content and revealed multilayer growth of amorphous hydrogenated carbon (a-C:H) films on selected thermoplastic materials
2017
Amorphous hydrogenated carbon (a-C:H) films were gradually deposited on high-density polyethylene (HDPE), polyethylene terephthalate (PET) and polyoxymethylene (POM) via an indirect (f-type) and a direct (r-type) plasma-enhanced chemical vapor deposition (PECVD) process with acetylene plasma. The surface morphologies of the thicker r-depositions on the three different thermoplastics have been analyzed by atomic force microscopy (AFM) at varying micrometer scales. Absorbance spectroscopy has been used to characterize the optical properties of all coatings. Intrinsic stress release phenomena are revealed on thicker layers through the detection of characteristic surface corrugations. Based on …
Influence of calcium‐based fillers and vegetable oil on the processability and yield behavior of polyolefins
1997
The mixing of different polyolefins, several calcium-based fillers, and a type of vegetable oil was investigated. The effect of viscosity and type of polyolefin on Young's modulus, yield stress, and elongation at yield has been determined. Tensile and machine torque properties have been studied for both mixing at 180°C and at 250°C as a function of the content of several types of calcium carbonate or calcium hydroxide filler. The influence of the addition of a sunflower oil as a lubricant has also been characterized. SEM micrographs indicate some problems of the formation of agglomerates and the influence of particle size on matrix morphology and filler/matrix adhesion. Physical and chemica…
Compatibilized Polyamide 6/Polyethylene Blends Clay Nanocomposites: Effect of the Degradation and Stabilization of the Clay Modifier
2008
Abstract Blends of polyamide 6 (PA6) and high-density polyethylene (HDPE) were compatibilized using an already investigated method and a sample of Cloisite 15A, a montmorillonite modified with ammonium quaternary salts was added. The blends were prepared in a twin screw extruder and characterized from a morphological, rheological and mechanical point of view. The results indicated that, despite a good morphology achieved in the filled blends and a moderate intercalation of the clay, the mechanical properties are far from being good, especially the ultimate properties. In order to investigate the possible influence of the inhibition of the crystallization and of the degradation of the organi…
Preparation and characterization of polyamide 6/polyethylene blend-clay nanocomposites in the presence of compatibilisers and stabilizing system
2010
Abstract Several compatibilising systems were added to high-density polyethylene (HDPE) and polyamide 6 (PA6) blends in the presence of an organically modified montmorillonite (OMM). All the blends were prepared by using a co-rotating twin-screw extruder and characterized by SEM, TEM and XRD analyses. In addition, the rheological behaviour and the mechanical properties – tensile and impact – were evaluated. The presence of OMM affects the dimensions of the polymeric phases in the blend but not their mutual adhesion, granted only by the compatibilisers. TEM, SEM and XRD analyses indicated that there is a strict correlation between the compatibilisation level and the final interlayer distance…
Injection Molding and Mechanical Properties of Bio-Based Polymer Nanocomposites
2018
The use of biodegradable/bio-based polymers is of great importance in addressing several issues related to environmental protection, public health, and new, stricter legislation. Yet some applications require improved properties (such as barrier or mechanical properties), suggesting the use of nanosized fillers in order to obtain bio-based polymer nanocomposites. In this work, bionanocomposites based on two different biodegradable polymers (coming from the Bioflex and MaterBi families) and two different nanosized fillers (organo-modified clay and hydrophobic-coated precipitated calcium carbonate) were prepared and compared with traditional nanocomposites with high-density polyethylene (HDPE…
The rheological behavior of HDPE/LDPE blends 4. Instability phenomena in capillary flow
1984
Experimental data, relative to instability phenomena in capillary flow, have been collected for HDPE/LDPE blends already characterized from a rheological viewpoint. The data comprise morphological observations as well as the determination of critical parameters as a function of the blend composition and of the processing conditions.