Search results for "Hydrochloric acid"

Reprocessing of Poly(Vinyl Chloride), Polycarbonate and Polyethyleneterephthalate

1998

Poly ethyleneterephthalate — PET- and Poly(vinyl chloride) — PVC — are two of the most frequently encountered polymers in post-consumer plastics. In particular, these polymers can be used for manufacturing the same products (bottles, for example) and therefore are often found in the same stream, even when the collection is done with separation. The recycling of PET and PVC is usually carried out by separating them and reprocessing the two homogeneous polymers. Indeed, the heterogeneous recycling of two polymers is at present almost impossible because of many problems: as their melting points are very different, at the processing temperature of PET severe degradation phenomena of PVC take pl…

1983

To obtain a carrier polymer for pharmacologically active components, linear polyethyleneimine (LPEI) was chemically modified by reactions with acrylic acid (1a), acrylamide (1b), acrylic acid esters (1c and 1d), sodium chloroacetate, and hydrochloric acid. All product polymers 2a – 2e are soluble in water. Among these, 2a and 2e, β- and α-amino acid derivatives, respectively, show no acute toxicity in mice up to dosages of 1 g/kg i. v. Similar types of polymers 5a and 5b and a polymer containing phosphonic acid moieties (5d) derived from branched polyethyleneimine (BPEI) were prepared. 5a and 5b are also nontoxic regardless of the molecular weight of four kinds of BPEI and of the wide range…

Eine oligomeranaloge friessche umlagerung oligomerer 2-acetoxy-1,3-phenylenmethylene

1979

α-Hydro-ω-hydroxypoly(5-chloro-2-hydroxy-1,3-phenylenemethylene)s (1a, b), the oligomeric condensation products from 4-chloro-2,6-bis(hydroxymethyl)phenol and 4-chlorophenol with hydrochloric acid in 1,4-dioxane, could be completely dehalogenated at room temperature and atmospheric pressure with hydrogene/Raney-Ni. The resulting oligomers 2a, b were esterified with acetic anhydride, and the esters 3a, b were subjected to a oligomer analogous Fries rearrangement to form the linear α-hydro-ω-hydroxypoly(5-acetyl-2-hydroxy-1,3-phenylenemethylene)s 4a and 4b. The characterization of the products was mainly done by spectroscopic methods.

Improved column-based radiochemical processing of the generator produced 68Ga.

2011

An improved chemical strategy for processing of the generator produced (68)Ga was developed based on processing of the original (68)Ge/(68)Ga generator eluate on a micro-column. Direct pre-concentration and purification of the eluted (68)Ga is performed on a cation-exchange resin in hydrochloric acid/acetone media. A supplementary step based on a second micro-column filled with a second resin allows direct re-adsorption of (68)Ga eluted from the cation exchanger. (68)Ga is finally striped from the second resin with a small volume of pure water. For this purpose a strong anion exchanger and a novel extraction chromatographic resin based on tetraalkyldiglycolamides are characterized. The stra…

ChemInform Abstract: Synthesis of a Tetraazido-Substituted 2-Tetrazene from 1,5- Cyclooctadiene and Iodine Azide.

2010

In contrast to the addition of iodine azide to cyclooctene (1) or 1,3-cyclooctadiene (5), its reaction with 1,5-cyclooctadiene (12) leads mainly to the surprisingly stable tetraazido-substituted 2-tetrazene 14 The structure of this was established by 15N-NMR studies and an X-ray structural analysis. Treatment of 14 with hydrochloric acid yields the diazido-substituted 9-azabicyclo[3.3.1]nonane 20.

Extraction behavior of rutherfordium into tributylphosphate from hydrochloric acid

2007

The extraction behavior of rutherfordium (Rf) into tributylphosphate (TBP) from hydrochloric acid (HCl) has been studied together with those of the lighter group-4 elements Zr and Hf. The extractability of261Rf,169Hf, and85Zr into TBP was investigated under identical conditions in 7.2–8.0 M HCl by on-line reversed-phase extraction chromatography. The percent extractions of Rf, Hf, and Zr into the TBP resin increase steeply with increasing HCl concentration, and the order of extraction is Zr > Hf ≈ Rf. By considering the order of chloride complexation among these elements, it is suggested that the stability of the TBP complex of Rf tetrachloride is lower than those of Zr and Hf.

ChemInform Abstract: On the Reactivity of Nitrosoimidazoles with Acids (the Cusmano-Ruccia Reaction): A Continuous Source of New Ring-into-Ring Inter…

2014

Abstract An extension of the ‘Cusmano–Ruccia’ reaction is reported. 6-(4-chlorophenyl)-3-methyl-5-nitrosoimidazo[2,1- b ]oxazole by the action of hydrochloric acid gives 3-(4-chlorobenzoyl)-5-methyl-1,2,4-oxadiazole ( 13 ); presumably via ammonium ion, CO 2 and methanol elimination. The relevance of the nature of the atom of the B -ring linked to C-2 of the imidazole for the occurrence of the ring-into-ring interconversion has been once more confirmed.

Application of pressurized fluid extraction to determine cadmium and zinc in plants

2006

Abstract A procedure for the determination of Cd and Zn in plants is proposed. The metals are extracted by pressurized fluid extraction (PFE). Operational conditions are: pressure 1500 psi, temperature 75 °C, static time 5 min, flush volume 35%, purge time 60 s, cycles 1 and 1,2-diaminocyclohexane- N , N , N ′, N ′-tetraacetic acid (CDTA) 0.01 M at pH 4.5 as extracting solution. Determination of Zn is carried out by flame atomic absorption spectroscopy and depending on the concentration level, Cd content is determined by flame or electrothermal atomic absorption spectroscopy. Certified samples of Virginia tobacco leaves, tea leaves, spinach leaves, poplar leaves, a commercial spinach sample…

Modeling and Design of Membrane Integrated Processes for HCl and Metals Recovery from Pickling Solutions

2018

Hydrochloric acid pickling is a common practice in steel manufacturing industry. During the process, acid is consumed to dissolve surface oxides and metals are accumulated in the solution. This fact leads to a process efficiency decrease. Continuous regeneration of pickling solutions enhances process rate and performance, but also minimises the highly expensive and environmentally risky wastewater disposal. The recovery of valuable substances (e.g. acid and metals) can be accomplished by coupling diffusion dialysis (DD) and membrane distillation (MD) technologies. In the present work, a steady state process simulator for the integrated process has been developed. The aim is to analyze and p…

Examples of UV–Vis profiles use as tool for evidence of the metallophthalocyanines transformation

2017

Abstract The UV–Vis spectra for a set of MPcs (Mmetal, Pc = phthalocyanine ligand), i.e.: In(III)PcI (1), Hf(IV)PcI2Pht (Pht = phthalonitrile) (2), Sn(II)Pc (3), Sn(IV)PcI2 (4), and Ge(IV)PcI2 (5) have been examined in two solvents, O-donative acetylacetone, and non-coordinative benzene. The UV–Vis spectra in Hacac solution of 1,2 and 4,5 shows that the axially ligated iodine atoms are replaced by (acac)− anions of the solvent, whereas in 3 the oxygen donors of the solvent causing the auto-oxidation of Sn(II) to Sn(IV) ions and as a result the Sn(II)Pc is transformed into the Sn(IV)Pc(acac)2. The chloride complexes of the 1–5 compounds are formed at Hacac solution after acidification by hyd…