Search results for "INGENIERIA QUIMICA"
showing 10 items of 54 documents
Thermogalvanic effects on the corrosion of copper in heavy brine LiBr solutions
2012
Thermogalvanic corrosion of copper in heavy brine LiBr solutions has been investigated using a zero-resistance ammeter (ZRA). The temperature gradients between copper electrodes immersed in the same LiBr solution result in the formation of thermogalvanic cells with hot anodes, leading to high and sustained thermogalvanic currents. Copper loss rates, calculated using Faraday's law, substantially exceed 0.025mmyear -1, a value regarded as the threshold of low corrosion rates. The effects of thermogalvanic coupling on the surface properties of the anode and the cathode have been analysed by means of electrochemical impedance spectroscopy (EIS). The results obtained in this analysis have been r…
Passive and transpassive behaviour of Alloy 31 in a heavy brine LiBr solution
2013
The passive and transpassive behaviour of Alloy 31, a highly alloyed austenitic stainless steel (UNS N08031), has been investigated in a LiBr heavy brine solution (400 g/l) at 25 °C using potentiostatic polarisation combined with electrochemical impedance spectroscopy and Mott–Schottky analysis. The passive film formed on Alloy 31 has been found to be p-type and/or n-type in electronic character, depending on the film formation potential. The thickness of the film formed at potentials within the passive region increases linearly with applied potential. The film formed at transpassive potentials is thinner and more conductive than the film formed within the passive region. These observations…
Study of the annealing conditions and photoelectrochemical characterization of a new iron oxide bi-layered nanostructure for water splitting
2016
Iron oxide nanostructures have emerged as promising materials for being used as photocatalysts for hydrogen production due to their advantageous properties. However, their low carrier mobility and short hole diffusion length limit their efficiency in water splitting. To overcome these drawbacks, in the present study, we synthetized a new hematite (alpha-Fe2O3) bi-layered nanostructure consisting of a top nanosphere layer and a nanotubular underneath one by electrochemical anodization. Annealing parameters such as temperature, heating rate and atmosphere were studied in detail in order to determine the optimum annealing conditions for the synthetized nanostructure. The obtained new bi-layere…
Effect of Temperature on Thermogalvanic Coupling of Alloy 31 in Libr Solutions Studied by Means of Imposed Potential Measurements
2011
[EN] Corrosion resistance of Alloy 31, a highly alloyed stainless steel (UNS N08031) were studied in heavy brine LiBr solutions (400, 700 and 992 g/l) at different temperatures using electrochemical techniques. The mixed potential theory was used to evaluate thermogalvanic corrosion of Alloy 31 in the studied LiBr solutions. Potentiodynamic curves indicate that high temperatures favoured both cathodic and anodic processes, increasing passive current densities and decreasing the pitting potential. Generally, the cold electrode of the pair was the anode of the thermogalvanic cell.
Formation of Hematite Nanotubes by Two-Step Electrochemical Anodization for Efficient Degradation of Organic Pollutants
2016
[EN] Nowadays, hematite (alpha-Fe2O3) has emerged as a promising photocatalyst for efficient degradation of organic pollutants due to its properties such as suitable band-gap (similar to 2.1 eV), stability against photocorrosion, abundance and low cost. However, some drawbacks such as low carrier mobility and short hole diffusion length limit its efficiency. In order to overcome these issues, self-ordered nanotubes can be synthetized. Anodization is one of the simplest and most economic techniques to produce nanostructures with high control. In the present study, self-ordered hematite nanotubes were synthetized by two-step electrochemical anodization. In two-step anodization, a first-step w…
Influence of the Heating Rate on the Annealing Treatment of Iron Oxide Nanostructures Obtained by Electrochemical Anodization under Hydrodynamic Cond…
2017
[EN] Iron oxide nanostructures are promising materials for photoelectrochemical applications such as water splitting. In this work, electrochemical anodization of iron is used to form different iron oxide nanostructures, and the influence of different anodization parameters was studied in order to find the most suitable nanostructure for photocatalysis applications. On the one hand, hydrodynamic conditions were evaluated by stirring the electrode at different rotation speeds during the electrochemical anodization to check their influence on the formation of the nanostructures. On the other hand, different heating rates during the annealing treatment were studied for obtaining efficient iron…
Photoelectrocatalyzed degradation of a pesticides mixture solution (chlorfenvinphos and bromacil) by WO3 nanosheets
2019
[EN] A photoelectrocatalyst consisting of WO3 nanosheets or nanorods has been synthesized by electrochemical anodization under hydrodynamic conditions, and has been used for the degradation of two toxic pesticides: chlorfenvinphos and bromacil. Nanostructures have been characterized by FESEM and Raman spectroscopy. Photoelectrochemical degradation tests have been carried out both for individual pesticide solutions and for a mixture solution, and the concentration evolution with time has been followed by UV¿Vis spectrophotometry. For individual pesticides, pseudo-first order kinetic coefficients of 0.402 h¿1 and 0.324 h¿1 have been obtained for chlorfenvinphos and bromacil, respectively, whi…
Visible-light photoelectrodegradation of diuron on WO3 nanostructures
2018
[EN] The degradation of pesticide diuron has been explored by photoelectrocatalysis (PEC) under visible light illumination using two different WO3 nanostructures, obtained by anodization of tungsten. The highest degradation efficiency (73%) was obtained for WO3 nanosheets synthesized in the presence of small amounts of hydrogen peroxide (0.05 M). For that nanostructure, the kinetic coefficient for diuron degradation was 133% higher than that for the other nanostructure (anodized in the presence of fluoride anions). These results have been explained by taking into account the different architecture and dimensions of the two WO3 nanostructures under study.
Optimization of the coagulation–flocculation treatment: influence of rapid mix parameters
1999
[EN] Turbid waters, containing suspended and colloidal particles, are normally treated by coagulation–flocculation followed by clarification; the process usually consists of the rapid dispersal of a coagulant into the raw water followed by an intense agitation commonly defined as rapid mixing. Rapid mixing is influenced by chemical and physical parameters and the final result of the whole treatment depends on this step. The study focused on the most important parameters of rapid mix design: velocity gradient and rapid mix time. Wastewaters from a tannery processing stored ovine hides were treated with aluminium(III) or iron(III) salts. Experimental results indicate that rapid mix time has a…
Photoelectrocatalyzed degradation of organophosphorus pesticide fenamiphos using WO3 nanorods as photoanode
2020
[EN] In this study, WO3 nanostructures were synthesized by the electrochemical anodization technique to use them on the degradation of persistent organic compounds such as the pesticide fenamiphos. The acids electrolyte used during the anodization were two different: 1.5 M H2SO4-0.05 M H2O2 and 1.5 M CH4O3S-0.05 M H2O2. Once the samples have been manufactured, they have been subjected to different tests to analyze the properties of the nanostructures. With Field Emission Scanning Electron Microscopy (FESEM) the samples have been examined morphologically, their composition and crystallinity has been studied through Raman Spectroscopy and their photoelectrochemical behaviour by Photoelectroch…