Search results for "INTERFACE"
showing 10 items of 2139 documents
Mechanical properties and corrosion behaviour after scratch and tribological tests of electrodeposited Co-Mo/TiO2 nano-composite coatings
2019
International audience; The micro-mechanical (Young’s modulus and hardness) and tribological properties, as well as the scratch resistance of Co-Mo/TiO2 nano-composite coatings were investigated. The coating was found to be harder and stiffer than the substrate (pure cobalt). Low residual stresses were also derived from Stoney’s equation (type I stress). The corrosion behaviour after tribological and scratch tests was studied in Ringer’s solution. Dry sliding of the coating against an alumina ball at the load of 1 N or 2 N over the same distance had nearly no influence onthe anodic branch of the polarisation curves. By contrast, the current density in the cathodic branch (oxygen reduction r…
Surface investigation of adhesive formulation consisting of UV sensitive triblock poly(styrene–b-butadiene–b-styrene) copolymer
2002
Abstract Atomic force microscopy (AFM) analysis in conjunction with macroscopic studies such as peel testing and contact angle measurement have been undertaken to explain the nanomechanical properties of adhesive formulation consisting of triblock poly(styrene–b-butadiene–b-styrene) (SBS) copolymers. The cross-linking of this photosensitive copolymer was investigated by analyzing the mechanical and morphological changes of each phase induced by the UV exposure. Main result is that the adhesive properties are strongly influenced by the cross-linking of the polybutadiene (PB) phase leading to an increase in the surface stiffness without affecting the surface energy. AFM analysis shows that th…
X-ray multiple diffraction in the characterization of TiNO and TiO2 thin films grown on Si(001)
2006
Abstract TiO 2 and TiN x O y thin films grown by low pressure metal-organic chemical vapor deposition (LP-MOCVD) on top of Si(0 0 1) substrate were characterized by X-ray multiple diffraction. X-ray reflectivity analysis of TiO 2 [1 1 0] and TiNO[1 0 0] polycrystalline layers allowed to determine the growth rate (−80 A/min) of TiO 2 and (−40 A/min) of TiNO films. X-ray multiple diffraction through the Renninger scans, i.e., ϕ -scans for (0 0 2)Si substrate primary reflection is used as a non-conventional method to obtain the substrate lattice parameter distortion due to the thin film conventional deposition, from where the information on film strain type is obtained.
Constitutive Numerical Model of FRCM Strips Under Traction
2020
In this paper, the tensile behavior of Fiber Reinforced Cementitious Matrix (FRCM) strips is investigated through Finite Element (FE) models. The most adopted numerical modeling approaches for the simulation of the fiber-matrix interface law are described. Among them, the cohesive model is then used for the generation of FE models which are able to simulate the response under traction of FRCM strips tested in laboratory whose results are available in the technical literature. Tests on basalt, PBO and carbon coated FRCM specimens are taken into account also considering different mechanical ratios of the textile reinforcement. The comparison between FE results and experimental data allows val…
Combining magnetic field induced locomotion and supramolecular interaction to micromanipulate glass fibers: toward assembly of complex structures at …
2011
The formation of ordered complex structures is one of the most challenging fields in the research of biomimic materials because those structures are promising with respect to improving the physical and mechanical properties of man-made materials. In this letter, we have developed a novel approach to fabricating complex structures on the mesoscale by combining magnetic-field-induced locomotion and supramolecular-interaction-assisted immobilization. We have employed a magnetic field to locomote the glass fiber, which was modified by the layer-by-layer self-assembly of magnetic nanoparticles, to desired positions and have exploited the supramolecular interaction to immobilize glass fiber onto …
Inside Back Cover: Rational Chemical Multifunctionalization of Graphene Interface Enhances Targeted Cancer Therapy (Angew. Chem. Int. Ed. 33/2020)
2020
Innenrücktitelbild: Rational Chemical Multifunctionalization of Graphene Interface Enhances Targeted Cancer Therapy (Angew. Chem. 33/2020)
2020
Evidence of hexagonal WO3 structure stabilization on mica substrate
2009
International audience; WO3 nanorods are grown by a simple vapor deposition method on a mica substrate and characterized by Selected Area Electron Diffraction and Energy Dispersive X-rays Spectroscopy. Experimental results show the clear evidence of an unexpected WO3 hexagonal structure as well as an epitaxial growth on the mica substrate. Besides, potassium is evidenced inside the nanorods. It is thus deduced that a metastable WO3 hexagonal phase is stabilized by epitaxy through a tungsten bronze interlayer having same hexagonal structure.
Does the Structural Water within Gypsum Remain Crystalline at the Aqueous Interface?
2021
Solid–Solid Interfaces in Protonic Ceramic Devices: A Critical Review
2020
The literature concerning protonic ceramic devices is critically reviewed focusing the reader's attention on the structure, composition, and phenomena taking place at solid-solid interfaces. These interfaces play a crucial role in the overall device performance, and the relevance of understanding the phenomena taking place at the interfaces for the further improvement of electrochemical protonic ceramic devices is therefore stressed. The grain boundaries and heterostructures in electrolytic membranes, the electrode-electrolyte contacts, and the interfaces within composite anode and cathode materials are all considered, with specific concern to advanced techniques of characterization and to …