Search results for "Icon"
showing 10 items of 3539 documents
Highly-sensitive anisotropic porous silicon based optical sensors
2012
The modeling, fabrication and characterization of PSi fabricated from both (110) and (100) surface oriented silicon for optical sensing is thoroughly reported. First, based on the generalized Bruggeman method, the birefringence and sensitivity of the fabricated membranes were calculated as a function of the fabrication parameters such as porosity and pore sizes; and external effects, such as the pores surface oxidation. Thereafter we report on the fabrication of PSi membranes from (110) and (100) surface oriented silicon with pore sizes in the range of 50 - 80 nm, and the characterization of their birefringence using a polarimetric setup. Their sensitivities were determined by filling the p…
Electrical characterization of deoxyribonucleic acid hybridization in metal-oxide-semiconductor-like structures
2012
In this work, metal-oxide-semiconductor (MOS)-like sensors in which deoxyribonucleic acid (DNA) strands are covalently immobilized either on Si oxide or on a gold surface were electrically characterized. Si oxide fabrication process allowed us to have a surface insensitive to the solution pH. A significant shift in the flat band voltage was measured after single strand DNA immobilization (+0.47 +/- 0.04 V) and after the complementary strand binding (+0.07 +/- 0.02 V). The results show that DNA sensing can be performed using a MOS structure which can be easily integrated in a more complex design, thus avoiding the problems related to the integration of micro-electrochemical cells.
Mapping the plasmonic response of gold nanoparticles embedded in TiO2thin films
2015
We present the mapping of the plasmonic properties of gold nanoparticles that are embedded in a TiO2 thin film deposited over two different substrates, glass and silicon. An improved electron energy-loss spectroscopy (EELS) imaging technique was used to extract plasmon maps with nanometre resolution. Several representative cases of randomly dispersed NPs have been examined to carefully evaluate surrounding effects on the optical response of such nanostructured material. Data were compared to analytical calculations and showed good agreement. These results validate previous structural and far-field optical results and provide a clear description of the optical phenomena that take place at a …
Growth and characterization of horizontally suspended CNTs across TiN electrode gaps.
2010
A technique is proposed to grow horizontal carbon nanotubes (CNTs) bridging metal electrodes and to assess their electrical properties. A test structure was utilized that allows for selective electrochemical sidewall catalyst placement. The selectivity of the technique is based on the connection of the desired metal electrodes to the silicon substrate where the potential for electrochemical deposition was applied. Control over the Ni catalyst size (15-30 nm) and density (up to 3 x 10(11) particles cm(-2)) is demonstrated. Horizontal CNTs with controlled diameter and density were obtained by CVD growth perpendicular to the sidewalls of patterned TiN electrode structures. Electrode gaps with …
Design and fabrication of an acoustic micromixer for biological media activation
2014
International audience; The bioassay of infinitesimal quantities of protein markers in biological samples is the way to early cancer detection. However, this detection can be limited by the diffusion of these macromolecules (analytes) from the bulk to the sensor chip (surface of ligands). Here, we propose a new method to overcome this drawback by the activation of the biological media during the detection step. The principle consists in using ultrasonic vibrations in order to disrupt the equilibrium states of such biomolecular reactions and performing simultaneous detection inside an acoustic micromixer. Technological realization and initial characterizations of the device have been perform…
High efficiency frequency doubling in fully diced LiNbO3ridge waveguides on silicon
2016
Nonlinear periodically poled ridge LiNbO3 waveguides have been fabricated on silicon substrates. Components are carved with only the use of a precision dicing machine without the need for grinding or polishing steps. They show efficient second harmonic generation at telecommunication wavelengths with normalized conversion reaching 204%/W in a 15 mm long device. The influence of the geometrical non uniformities of waveguides due to fabrication processes is asserted. Characteristics of the components are studied; notably their robustness and tunability versus temperature.
Inverted-opal photonic crystals for ultra light-trapping in solar cells
2010
We investigated a three dimensional inverted opal having the potential to notably increase light-trapping in solar cells. The 3D photonic crystal top layer is an angle- and direction-selective filter, which decreases the acceptance cone of the solar cell. Numerical optimisation methods are used to verify the optical and electrical properties for a large angluar and energy spectrum for a system consisting of an inverted opal on top of a thin crystalline silicon solar cell. It is numerically shown that an inverted opal grown in the Τ - Xdirection might fulfill the requirement for such a filter. An estimate for the theoretically achievable efficiency for nonconcentrated light is presented that…
Vapor-Deposited Perovskites: The Route to High-Performance Solar Cell Production?
2017
Summary High-quality semiconducting perovskites can be easily synthesized through several methods. The ease of fabrication has favored the adoption of lab-scale solution-processing techniques, which have yielded the highest performing devices. Most of these processes, however, are not directly applicable to larger scale and volume preparations, hindering the consolidation and market entry of this technology. Vapor-based methods, a mature technology widely adopted in the coating and semiconductor industry, could change this trend. Their application to perovskite solar cells includes a large amount of fabrication approaches, offering versatility in the employed materials as well as in the cha…
Microreflectivity studies of wavelength control in oxidised AlGaAs microcavities
2003
Wet oxidation of GaAs/AlGaAs structures is an important technique in the processing of advanced devices such as vertical cavity surface emitting lasers (VCSELs). In one VCSEL application, the low-index and electrically-insulating AlxOy layers have been used to obtain high-reflectivity and broad bandwidth distributed Bragg reflector mirrors (DBRs). A further recent development has shown that combined lateral–vertical oxidation of intracavity AlGaAs layers can be used to tune the resonant wavelength of a semiconductor microcavity. The slow oxidation rate limits the lateral scale of practical wet oxidation to mesas structures of 50–100 μm in width. Therefore post-processing assessment of spect…
Bottom‐Up Fabrication of Semiconductive Metal-Organic Framework Ultrathin Films
2018
Though generally considered insulating, recent progress on the discovery of conductive porous metal-organic frameworks (MOFs) offers new opportunities for their integration as electroactive components in electronic devices. Compared to classical semiconductors, these metal-organic hybrids combine the crystallinity of inorganic materials with easier chemical functionalization and processability. Still, future development depends on the ability to produce high-quality films with fine control over their orientation, crystallinity, homogeneity, and thickness. Here self-assembled monolayer substrate modification and bottom-up techniques are used to produce preferentially oriented, ultrathin, con…