Search results for "Instrumentation"

Protein dynamics observed by tunable mid-IR quantum cascade lasers across the time range from 10 ns to 1 s

2017

We have developed a spectrometer based on tunable quantum cascade lasers (QCLs) for recording time-resolved absorption spectra of proteins in the mid-infrared range. We illustrate its performance by recording time-resolved difference spectra of bacteriorhodopsin in the carboxylic range (1800–1700 cm− 1) and on the CO rebinding reaction of myoglobin (1960–1840 cm− 1), at a spectral resolution of 1 cm− 1. The spectrometric setup covers the time range from 4 ns to nearly a second with a response time of 10–15 ns. Absorption changes as low as 1 × 10− 4 are detected in single-shot experiments at t > 1 μs, and of 5 × 10− 6 in kinetics obtained after averaging 100 shots. While previous time-res…

The first experimental values for the stopping power of 89Y ions in carbon, nickel and gold

2009

Abstract The stopping power values of 89 Y ions in carbon, nickel and gold were measured with accuracy to better than 5% in the energy range from 0.03 to 8.2 MeV/u. The newly developed B-TOF method was used for the measurements. The results are compared with theoretical and semi-empirical predictions. For this ion/absorber combination no prior experimental data are available.

Fast k-Space Mapping of Electronic Bands Using Time-of-Flight Based Cathode-Lens Microspectroscopy.

2015

A logarithmic multi-parameter model using gas sensor main and cross sensitivities to estimate gas concentrations in a gas mixture for SnO2 gas sensors

2007

Abstract In a metal-oxide semiconductor gas sensor, the sensitivity of the metal-oxide resistance to concentrations of reducing gases in the surrounding atmosphere is known to be related to adsorption and desorption of gas on the redox reactions between the gas and oxygen. Changes in the electric conductance due to these reactions were measured for tin dioxide semiconductor gas sensors. In this study, we propose a model of gas sensor responding behaviour using a relationship between sensor conductance and gas concentrations in a mixture. A least-squares method fit of measured data was applied to determining the values of coefficients. The proposed method uses main and cross sensitivities th…

Digitizing data acquisition and time-of-flight pulse processing for ToF-ERDA

2016

A versatile system to capture and analyze signals from multi channel plate (MCP) based time-of-flight detectors and ionization based energy detectors such as silicon diodes and gas ionization chambers (GIC) is introduced. The system is based on commercial digitizers and custom software. It forms a part of a ToF-ERDA spectrometer, which has to be able to detect recoil atoms of many different species and energies. Compared to the currently used analogue electronics the digitizing system provides comparable time-of-flight resolution and improved hydrogen detection efficiency, while allowing the operation of the spectrometer be studied and optimized after the measurement. The hardware, data acq…

Trajectory bending and energy spreading of charged ions in time-of-flight telescopes used for ion beam analysis

2014

Carbon foil time pick-up detectors are widely used in pairs in ion beam applications as time-of-flight detectors. These detectors are suitable for a wide energy range and for all ions but at the lowest energies the tandem effect limits the achievable time of flight and therefore the energy resolution. Tandem effect occurs when an ion passes the first carbon foil of the timing detector and its charge state is changed. As the carbon foil of the first timing detector has often a non-zero voltage the ion can accelerate or decelerate before and after the timing detector. The combination of different charge state properties before and after the carbon foil now induces spread to the measured times…

Depth profiling of Al2O3 + TiO2 nanolaminates by means of a time-of-flight energy spectrometer

2011

Atomic layer deposition (ALD) is currently a widespread method to grow conformal thin films with a sub-nm thickness control. By using ALD for nanolaminate oxides, it is possible to fine tune the electrical, optical and mechanical properties of thin films. In this study the elemental depth profiles and surface roughnesses were determined for Al2O3 + TiO2 nanolaminates with nominal single-layer thicknesses of 1, 2, 5, 10 and 20 nm and total thickness between 40 nm and 60 nm. The depth profiles were measured by means of a time-of-flight elastic recoil detection analysis (ToF-ERDA) spectrometer recently installed at the University of Jyväskylä. In TOF-E measurements 63Cu, 35Cl, 12C and 4He ions…

A simple timestamping data acquisition system for ToF-ERDA

2015

A new data acquisition system, ToF-DAQ, has been developed for a ToF-ERDA telescope and other ToF-E and ToF-ToF measurement systems. ToF-DAQ combines an analogue electronics front-end to asynchronous time stamped data acquisition by means of a FPGA device. Coincidences are sought solely in software based on the timestamps. Timestamping offers more options for data analysis as coincidence events can be built also in offline analysis. The system utilises a National Instruments R-series FPGA device and a Windows PC as a host computer. Both the FPGA code and the host software were developed using the National Instruments LabVIEW graphical programming environment. Up to eight NIM ADCs can be han…

Time-of-flight - Energy spectrometer for elemental depth profiling - Jyväskylä design

2014

Abstract A new time-of-flight elastic recoil detection spectrometer has been built, and initially the main effort was focused in getting good timing resolution and high detection efficiency for light elements. With the ready system, a 154 ps timing resolution was recorded for scattered 4.8 MeV 4 He 2+ ions. The hydrogen detection efficiency was from 80% to 20% for energies from 100 keV to 1 MeV, respectively, and this was achieved by having an additional atomic layer deposited Al 2 O 3 coating on the first timing detector’s carbon foil. The data acquisition system utilizes an FPGA-card to time-stamp every time-of-flight and energy event with 25 ns resolution. The different origins of the ba…

Search for lepton flavour violation in the e mu continuum with the ATLAS detector in root s=7 TeV pp collisions at the LHC

2012

This paper presents a search for the t-channel exchange of an R-parity violating scalar top quark ([~ over t] ) in the e[superscript ±]μ[superscript ∓] continuum using 2.1 fb[superscript −1] of data collected by the ATLAS detector in s√=7 TeV pp collisions at the Large Hadron Collider. Data are found to be consistent with the expectation from the Standard Model backgrounds. Limits on R-parity-violating couplings at 95 % C.L. are calculated as a function of the scalar top mass ( m[subscript bar over t]). The upper limits on the production cross section for pp→eμX, through the t-channel exchange of a scalar top quark, ranges from 170 fb for m[subscript ~ over t]=95 GeV to 30 fb for m[subscrip…