Search results for "Interfaces"
showing 10 items of 1258 documents
Dielectrophoretic alignment and electrical characterization of CuO nanowire-based systems
2021
Abstract Dielectrophoresis is used to assemble nanowires between metallic electrodes to form scalable functional interconnects. The dielectrophoresis parameters are investigated for semiconductor copper oxide (CuO) nanowires that are desirable for energy conversion and storage, gas sensors and nanoelectromechanical systems. Experimental yields of multiple- and single-nanowire interconnects are explored at dielectrophoresis frequencies from 500 Hz to 500 kHz. The electrical properties of nanowire-electrode physical contact interfaces formed by dielectrophoresis, metal deposition, and dry mechanical transfer are investigated. The electrical transport mechanism in these interconnects is determ…
Reduced graphene oxide/silver nanoparticles/β-cyclodextrin nanosponges composites with improved photocatalytic activity
2023
Significant activity improvement was achieved by associating graphene oxide-silver composite photocatalysts with cyclodextrin-based nanosponge materials, due to the synergistic effect provided by the supramolecular host abilities of the nanosponge. Three photocatalysts were prepared, fully characterized (FT-IR, ss-NMR, Raman, XRD, SEM, EDX, AFM, ICP, TGA, potentiometric titration), and tested for the oxidative photodegradation of some dyes and phenols, chosen as model organic pollutants. Compared to the unsupported photocatalyst, the nanosponge-based materials showed enhanced performances (being able to carry out the degradation even of dyes which do not react in the presence of the unsuppo…
Local structure of nanosized tungstates revealed by evolutionary algorithm
2015
Nanostructured tungstates, such as CoWO4 and CuWO4, are very promising catalytic materials, particularly for photocatalytic oxidation of water. The high catalytic activity of tungstate nanoparticles partially is a result of their extremely small sizes, and, consequently, high surface-to-volume ratio. Therefore their properties depend strongly on the atomic structure, which differ significantly from that of the bulk material. X-ray absorption spectroscopy is a powerful technique to address the challenging problem of the local structure determination in nanomaterials. In order to fully exploit the structural information contained in X-ray absorption spectra, in this study we employ a novel ev…
Synthesis of WO3 nanorods through anodization in the presence of citric acid: Formation mechanism, properties and photoelectrocatalytic performance
2021
[EN] In this study, WO3 nanomds have been fabricated by simple anodization in the presence of different amounts of citric acid and at different anodization times. A comprehensive morphological, structural, electrochemical and photoelectrochemical characterization of different samples has been carried out. Moreover, a formation mechanism for WO3 nanorods has been proposed. Finally, these nanostructures have been proven to be excellent visible-light photoelectrocatalysts to remove persistent organic pollutants present in wastewaters, such as fenamiphos. Almost the 80% of this molecule was eliminated from the test solution after 180 min of irradiation, indicating the great potential of these W…
Tailoring of the electronic properties of ZnO-polyacrylonitrile nanofibers: Experiment and theory
2017
Abstract We report the study of ZnO-polyacrylonitrile (ZnO-PAN) nanofibers fabricated by the combination of electrospinning and atomic layer deposition. The latter technique enables us to control the size of the surface of ZnO 1D nanostructures and hence its effectiveness for energy and biosensor applications. We observe the tendency of ZnO to form nanograins with increase of the layer thickness, and investigate the influence of the grain size on the electronic properties of the nanofibers. It is demonstrated that the ZnO work function (Φ) is strongly affected by surface band bending in the ZnO layer. The observed change of Φ in ZnO layers results from the curvature of the grain surface as …
Formation of ZnO nanowires by anodization under hydrodynamic conditions for photoelectrochemical water splitting
2020
[EN] The present work studies the influence of hydrodynamic conditions (from 0 to 5000 rpm) during Zn anodization process on the morphology, structure and photoelectrocatalytic behavior of ZnO nanostructures. For this purpose, analysis with Confocal Laser-Raman Spectroscopy, Field Emission Scanning Electron Microscope (FE-SEM) and photoelectrochemical water splitting tests were performed. This investigation reveals that hydrodynamic conditions during anodization promoted the formation of ordered ZnO nanowires along the surface that greatly enhance its stability and increases the photocurrent density response for water splitting in a 159% at the 5000 rpm electrode rotation speed.
Controlled hydrodynamic conditions on the formation of iron oxide nanostructures synthesized by electrochemical anodization: Effect of the electrode …
2017
[EN] Iron oxide nanostructures are of particular interest because they can be used as photocatalysts in water splitting due to their advantageous properties. Electrochemical anodization is one of the best techniques to synthesize nanostructures directly on the metal substrate (direct back contact). In the present study, a novel methodology consisting of the anodization of iron under hydrodynamic conditions is carried out in order to obtain mainly hematite (alpha-Fe2O3) nanostructures to be used as photocatalysts for photoelectrochemical water splitting applications. Different rotation speeds were studied with the aim of evaluating the obtained nanostructures and determining the most attract…
Self-Assembly of block copolymers into internally ordered microparticles
2020
Abstract Block copolymer (BCP) self-assembly is one of the most versatile concepts for the bottom-up design of functional nanostructures in materials science, nanomedicine and nanotechnology. While BCPs have been extensively studied regarding their microphase separation in bulk and the self-assembly in solution, only recently BCPs were investigated for their ability to form internally ordered microparticles. In this review, we discuss two emerging concepts: (i) the microphase separation of BCPs in the spherical confinement of evaporating emulsion droplets and (ii) the self-assembly of highly asymmetric BCPs under concentrated conditions. While the first concept yields solid and compact mult…
Electrochemically shape-controlled transformation of magnetron sputtered platinum films into platinum nanostructures enclosed by high-index facets
2017
Abstract A new method based on transformation of magnetron sputtered platinum thin films into platinum nanostructures enclosed by high-index facets, using electrochemical potential cycling in a twin working electrode system is reported. The controllable formation of various Pt nanostructures, described in this paper, indicates that this method can be used to control a selective growth of high purity Pt nanostructures with specific shapes (facets or edges). The method opens up new possibilities for electrochemical preparation of nanostructured Pt catalysts at high yield.
Molecular dynamics simulations of capillary rise experiments in nanotubes coated with polymer brushes.
2007
The capillary filling of a nanotube coated with a polymer brush is studied by molecular dynamics simulations of a coarse-grained model, assuming various conditions for the fluid-wall and fluid-brush interactions. Whereas the fluid is modeled by simple point particles interacting with Lennard-Jones forces, the (end-grafted, fully flexible) polymers that form the brush coating are described by a standard bead-spring model. Our experiments reveal that capillary filling is observed even for walls that would not be wetted by the fluid, provided the polymer brush coating itself wets. Generally, it is found that the capillary rise always proceeds through a t1/2 law with time t while the underlying…