Search results for "Ion beam"
showing 10 items of 297 documents
Development of the CRIS (Collinear Resonant Ionisation Spectroscopy) beam line
2012
The CRIS (Collinear Resonant Ionisation Spectroscopy) beam line is a new experimental set up at the ISOLDE facility at CERN. CRIS is being constructed for highresolution laser spectroscopy measurements on radioactive isotopes. These measurements can be used to extract nuclear properties of isotopes far from stability. The CRIS beam line has been under construction since 2009 and testing of its constituent parts have been performed using stable and radioactive ion beams, in preparation for its first on-line run. This paper will present the current status of the CRIS experiment and highlight results from the recent tests. ispartof: pages:012070-6 ispartof: Journal of Physics: Conference Serie…
Shape ofAr44: Onset of deformation in neutron-rich nuclei nearCa48
2009
The development of deformation and shape coexistence in the vicinity of doubly magic $^{48}\mathrm{Ca}$, related to the weakening of the $N=28$ shell closure, was addressed in a low-energy Coulomb excitation experiment using a radioactive $^{44}\mathrm{Ar}$ beam from the SPIRAL facility at GANIL. The ${2}_{1}^{+}$ and ${2}_{2}^{+}$ states in $^{44}\mathrm{Ar}$ were excited on $^{208}\mathrm{Pb}$ and $^{109}\mathrm{Ag}$ targets at two different beam energies. $B(E2)$ values between all observed states and the spectroscopic quadrupole moment of the ${2}_{1}^{+}$ state were extracted from the differential Coulomb excitation cross sections, indicating a prolate shape of the $^{44}\mathrm{Ar}$ n…
New subshell closure atN=58emerging in neutron-rich nuclei beyondNi78
2010
The structure of neutron-rich nuclei beyond $^{78}\mathrm{Ni}$ was studied using postaccelerated radioactive beams of $^{83,84,85}\mathrm{Ga}$ utilizing $\ensuremath{\beta} \ensuremath{\gamma}$ and $\ensuremath{\beta}\ensuremath{-}n \ensuremath{\gamma}$ spectroscopy. Our data, when combined with energy level systematics, suggests a possible new spherical subshell closure at $N=58$ is created by the nearly degenerated $\ensuremath{\nu}3{s}_{1/2}$ and $\ensuremath{\nu}2{d}_{5/2}$ orbitals being well separated from other orbitals above $N=50$. The near degeneracy of these states could be evidenced by isomerism in this region. The energies of the ${2}_{1}^{+}$ and proposed ${4}_{1}^{+}$ states …
CERN's longest serving experimental facility
2004
The On-Line Isotope Separator ISOLDE has operated continuously at CERN since 1967. Today ISOLDE and its Post accelerator REX-ISOLDE, dedicated to the production of a large variety of radioactive ion beams with energies from 1 keV/u up to 3.1 MeV/u, are used for a great number of different experiments in the fields of nuclear and atomic physics, nuclear astrophysics, material physics and life sciences. The facility, originally located at the CERNs first accelerator Synchrocyclotron (SC), has been located at the Proton-Synchrotron Booster (PSB) since 1992. Long and outstanding operation of ISOLDE has had important impact on the evolution of nuclear physics and its applications. ISOLDE has bee…
Laser cooling of stored high-velocity ions by means of the spontaneous force
1993
A longitudinal laser cooling of ion beams at about 5% of the velocity of light has been performed at the Heidelberg Test Storage Ring with various cooling schemes employing the spontaneous force. For a 7.29-MeV $^{9}\mathrm{Be}^{+}$ beam with an initial longitudinal temperature of 2700 K, the main characteristics of laser cooling in a storage ring are discussed. When undamped, the transverse betatron oscillations of the coasting ions limit the longitudinal temperature after laser cooling to typically 1 K. After damping the transverse motion by precooling the ions with an electron cooler, longitudinal temperatures of below 30 mK have been obtained in the subsequent laser cooling. In this cas…
COMMISSIONING OF THE SPEDE SPECTROMETER WITH STABLE BEAMS
2017
The SPectrometer for Electron DEtection (SPEDE) has been constructed for in-beam nuclear structure studies using radioactive ion beams. SPEDE employs a silicon detector for detecting conversion electrons. It is designed to be used in conjunction with the MINIBALL spectrometer at HIE-ISOLDE, CERN. Peer reviewed
Development of a MeV ion beam lithography system in Jyväskylä
2007
A lithographic facility for writing patterns with ion beams from cyclotron beams is under development for the Jyväskylä cyclotron. Instead of focusing and deflecting the beam with electrostatic and magnetic fields a different approach is used. Here a small rectangular beam spot is defined by the shadow of a computer-controlled variable aperture in close proximity to the sample. This allows parallel exposure of rectangular pattern elements of 5–500 μm side with protons up to 6 MeV and heavy ions (20Ne, 85Kr) up to few 100 MeV. Here we present a short overview of the system under construction and development of the aperture design, which is a critical aspect for all ion beam lithography syste…
Objective improvement of the visual quality of ion microscope images
2013
The need to operate with low ion beam fluences implies the images obtained using ion microscope (IM) are often grainy and have poor visual quality compared to what can be obtained using e.g. confocal microscopy. This results from the Poissonian distribution of counts in pixels. Here we report work on some different approaches for objectively improving the visual quality of IM images. In this work we present (i) dramatic improvement in the visual image quality of off-axis and direct-scanning transmission ion microscopy (STIM) images by suppression of zero-pixels; (ii) denoising of PIXE images using wavelet filtering and (iii) use of the feature preserving characteristics of wavelet filtering…
Angular spreading measurements using MeV ion microscopes
2013
Abstract The sharpness of MeV ion microscope images is governed by small-angle scattering and associated lateral spreading of the ion beam in the sample. We have investigated measurement of the half-angle of the angular spreading distribution by characterising the image blurring in direct-Scanning Transmission Ion Microscopy (direct-STIM). In these tests Mylar™ foils of 0.5–6 μm were used to induce angular spreading. Images were taken of an electron microscope grid using 2 MeV protons with, and without, the foils in the beam path. The blurring was measured by fitting the width of a circular Gaussian point spread function to the images with and without the foil in position. The results show …
Imaging pore space in tight gas sandstone reservoir: insights from broad ion beam cross-sectioning
2010
Monetization of tight gas reservoirs, which contain significant gas reserves world-wide, represents a challenge for the entire oil and gas industry. The development of new technologies to enhance tight gas reservoir productivity is strongly dependent on an improved understanding of the rock properties and especially the pore framework. Numerous methods are now available to characterize sandstone cores. However, the pore space characterization at pore scale remains difficult due to the fine pore size and delicate sample preparation, and has thus been mostly indirectly inferred until now. Here we propose a new method of ultra high-resolution petrography combining high resolution SEM and argon…