Search results for "JOINT"
showing 10 items of 1472 documents
Three-Dimensional Strain Analysis of Single-Lap Bolted Joints in Thick Composites Using Fibre-Optic Gauges and the Finite-Element Method
2010
Bolted joints involving composite plates used to be almost entirely dedicated to aerospace applications. As the need for energy conservation has increased, the field of composite bolted joints has found new applications in ground armoured vehicles. Thick panels able to withstand large in-plane and impact loads are critical. The present investigation evaluates the interior strain field, through the thickness, of a composite plate connected to an aluminium panel with a single-lap bolted joint. The area of interest is the bearing plane region close to the hole because of the presence of stress concentrations that heavily modify the stress field. Experimental data for the bolted joint were rec…
Bearing strength and failure behavior of pinned hybrid glass-flax composite laminates
2018
Abstract The aim of the present work is to evaluate the influence of external layers of glass woven fabric on the pin-hole strength of flax/epoxy laminates. Single lap bearing tests were carried out to evaluate the fastened joint performances depending on laminate stacking sequence. In order to better identify the mechanical behavior of the hybrid laminate, full glass and flax laminates were also compared. In particular, bearing stress and failure mechanisms were investigated at varying joint geometry. Furthermore, an experimental failure map, clustering main failure modes of pinned hybrid composite laminate, was used to better clarify the relationship between mechanical failure and geometr…
Induced Modification of Flexural Toughness of Natural Hydraulic Lime Based Mortars by Addition of Giant Reed Fibers
2020
Abstract Nowadays, there is a growing need to reduce the environmental impact generated by the use of inorganic materials for building applications. The aim of this work is to investigate the bio-lime based mortar flexural toughness improvement due to the addition of common reed fibers (Arundo donax L.) in order to evaluate their possible application as ductile eco-compatible prefabricated bricks or laying and joint mortars for masonry. Different sets of specimens were tested by varying the fiber weight content and the fiber length. Moreover, chemical treatments with Linseed Oil and Polyethylene glycol (PEG) were performed to improve the physical and mechanical properties of the fibers as w…
Evolution of the bearing failure map of pinned flax composite laminates aged in marine environment
2020
Abstract Aim of the present paper is to evaluate how the bearing behavior of pinned flax composites can be influenced by their exposition to critical environment such as marine one. To this scope, flax fibers/epoxy pinned laminate was exposed up to 60 days to salt-fog environment, according to ASTM B 117 standard. In particular, samples having different hole diameter (D), laminate width (W), and hole center to laminate free edge distance (E) have been tested under single lap bearing tests at varying the aging exposition time. Following this procedure, an experimental 2D failure map clustering main failure modes was created by placing the experimental results in the plane E/D versus W/D rati…
Failure Map of Composite Laminate Mechanical Joint
2007
The aim of this research is to investigate the pin/hole contact stress of a composite laminate and failure modes when submitted to tensile bearing tests. The limit loads and failure modes are evaluated as a function of pin diameter and hole position. Analyzing the joint geometry effect on the fracture mechanisms, a failure map is obtained, identifying three regions of typical failure modes of mechanically fastened joints. A theoretical approach is proposed to identify the field of each fracture mode to obtain a simple experimental methodology to support the design of a particular joint laminate. In addition, a simplified numerical model is proposed to evaluate near the hole the stress/stra…
Graphene Oxide Carboxymethylcellulose Nanocomposite for Dressing Materials.
2020
Sore, infected wounds are a major clinical issue, and there is thus an urgent need for novel biomaterials as multifunctional constituents for dressings. A set of biocomposites was prepared by solvent casting using different concentrations of carboxymethylcellulose (CMC) and exfoliated graphene oxide (Exf-GO) as a filler. Exf-GO was first obtained by the strong oxidation and exfoliation of graphite. The structural, morphological and mechanical properties of the composites (CMCx/Exf-GO) were evaluated, and the obtained composites were homogenous, transparent and brownish in color. The results confirmed that Exf-GO may be homogeneously dispersed in CMC. It was found that the composite has an i…
Experimental Characterization of the Properties of Double-Lap Needled and Hybrid Joints of Carbon/Epoxy Composites
2015
The effect of through-thickness reinforcement by thin 1 mm steel needles (z-pins) on the static tensile strength of double-lap joints of a carbon/epoxy composite was investigated. Two types of joints—z-pinned and hybrid (including glued ones)—were considered. The joints were reinforced in the overlap region with 9, 25, or 36 z-pins. Comparing mechanical properties of the double-lap joints with the corresponding characteristics of their unpinned counterparts, the z-pins were found to be highly effective: the strength and stiffness of the pinned joints increased up to 300% and 280%, respectively. These improvements were due to a transition in the failure mechanism from debonding of the joint …
Comparison between preparative methodologies of nanostructured carbon nitride and their use as selective photocatalysts in water suspension
2017
Carbon nitride photocatalysts have been prepared by different methodologies, such as chemical ultrasonic irradiation (sonochemical treatment), hydrothermal and ball milling and thermoexfoliation, and have been used for the selective oxidation of 5-hydroxymethyl-2-furaldehyde (HMF) to form 2,5-furandicarboxyaldehyde (FDC) in water suspension both under UV and natural solar irradiation. The physico-chemical features of the photocatalysts have been studied by X-ray diffraction, infrared spectroscopy, UVâVis diffuse reflectance spectroscopy, photoluminescence spectroscopy, scanning electron microscopy, and specific surface area measurements. The results indicate that exfoliation of carbon nit…
Fatigue strength of a single lap joint SPR-bonded
2011
In the last years, hybrid joints, meaning with this the joints which consist in combining a traditional mechanical joint to a layer of adhesive, are gradually attracting the attention of various sectors of the construction of vehicles and transportation industries, for their better performance compared to just mechanical joints (self-piercing riveting SPR, riveting, and so on) or just to bonded joints. The paper investigates the fatigue behavior of a single lap joint self-piercing riveted (SPR) and bonded throughout fatigue tests. The considered geometric configuration allowed the use of two rivets placed longitudinally; an epoxy resin was used as adhesive. In the first part of the work sta…
A two steps Lagrangian–Eulerian numerical model for the simulation of explosive welding of three dissimilar materials joints
2021
Abstract Explosion welding (EXW) is a solid-state joining process used to produce lap joints out of metal plates of dissimilar materials. During the process, a controlled explosive detonation results in a pressure wave pushing one of the plates to be welded, called flyer, against the other with high velocity. The high pressure and temperature generated, because of the impact energy decaying into heat, create the conditions for solid bonding phenomenon to take place. Due to the complexity of experimental tests, numerical simulation is considered a fundamental design tool for the process. Different approaches are found in literature to simulate the process. In this paper, a dual step Lagrangi…