Search results for "LIGHT"

Er:YAG laser in defocused mode for scaling of periodontally involved root surfaces: An in vitro pilot study

2005

Item does not contain fulltext BACKGROUND: The Er:YAG laser may be used on periodontally involved teeth in combination with conventional periodontal therapy in order to improve the efficacy of root instrumentation. The aim of this study was to compare the effect of hand instrumentation on root surfaces of periodontally involved teeth with Er:YAG laser application. METHODS: Thirty freshly extracted, non-carious, single-rooted, periodontally diseased human teeth from adult humans with advanced periodontal disease were used in this study. The teeth were divided into three groups of 10 specimens each. Group A was treated with scaling and root planing (SRP) with curets only (control). In group B…

Efficient H2 production by photocatalytic water splitting under UV or solar light over variously modified TiO2-based catalysts

2019

Abstract This paper focused for the first time on the comparison between three different approach to modify the chemico-physical properties of TiO2-based photocatalysts and their effect in the H2 production by photocatalytic water splitting both under UV and solar light irradiation, under the same experimental conditions. The application of pulsed laser irradiation to aqueous TiO2 suspensions (first approach) induced structural transformations both on the bulk and on the surface of TiO2, boosting the H2 production, under UV light irradiation, of almost three times (20.9 mmol/gcat·h) compared to bare TiO2 (7.7 mmol/gcat·h). The second strategy was based on a templating method to obtain TiO2 …

Self-cleaning materials active in the visible range based on porphyrin-sensitised titanium dioxide

2016

In the last decades, nanostructured semiconductors played a central role in the material science scene because of their numerous applications spanning from renewable energy to organic/hybrid electronics up to photocatalysis. Titanium dioxide is one of the most used semiconductors because of its low cost, chemical stability, sustainability and versatility. Indeed, it is widely employed as photo-active or charge- transporting material in electronic devices, as photocatalyst in water de-pollution treatments etc.. Remarkably, one of the most interesting application of titanium dioxide consists of the protection and conservation of cultural heritages. Actually, TiO2 photocatalytic properties are…

Hydrothermal Synthesis of Ionic Liquid [Bmim]OH-Modified TiO2 Nanoparticles with Enhanced Photocatalytic Activity under Visible Light

2010

TiO(2) nanocomposites modified with the ionic liquid [Bmim]OH are synthesized by a hydrothermal procedure. X-ray diffraction, Zeta-potential measurement, TEM, thermogravimetric analysis, photoluminescence, UV/Vis, FTIR, and X-ray photoelectron spectroscopy are used to characterize the TiO(2) nanocomposites. The TiO(2) nanocomposites consist of pure anatase particles of about 10 nm. The modification of [Bmim]OH on the surface of the TiO(2) particles extends the TiO(2) absorption edge to the visible-light region. The electrochemical redox potentials indicated that the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of [Bmim]OH match well with the valen…

Digitizing data acquisition and time-of-flight pulse processing for ToF-ERDA

2016

A versatile system to capture and analyze signals from multi channel plate (MCP) based time-of-flight detectors and ionization based energy detectors such as silicon diodes and gas ionization chambers (GIC) is introduced. The system is based on commercial digitizers and custom software. It forms a part of a ToF-ERDA spectrometer, which has to be able to detect recoil atoms of many different species and energies. Compared to the currently used analogue electronics the digitizing system provides comparable time-of-flight resolution and improved hydrogen detection efficiency, while allowing the operation of the spectrometer be studied and optimized after the measurement. The hardware, data acq…

Trajectory bending and energy spreading of charged ions in time-of-flight telescopes used for ion beam analysis

2014

Carbon foil time pick-up detectors are widely used in pairs in ion beam applications as time-of-flight detectors. These detectors are suitable for a wide energy range and for all ions but at the lowest energies the tandem effect limits the achievable time of flight and therefore the energy resolution. Tandem effect occurs when an ion passes the first carbon foil of the timing detector and its charge state is changed. As the carbon foil of the first timing detector has often a non-zero voltage the ion can accelerate or decelerate before and after the timing detector. The combination of different charge state properties before and after the carbon foil now induces spread to the measured times…

Depth profiling of Al2O3 + TiO2 nanolaminates by means of a time-of-flight energy spectrometer

2011

Atomic layer deposition (ALD) is currently a widespread method to grow conformal thin films with a sub-nm thickness control. By using ALD for nanolaminate oxides, it is possible to fine tune the electrical, optical and mechanical properties of thin films. In this study the elemental depth profiles and surface roughnesses were determined for Al2O3 + TiO2 nanolaminates with nominal single-layer thicknesses of 1, 2, 5, 10 and 20 nm and total thickness between 40 nm and 60 nm. The depth profiles were measured by means of a time-of-flight elastic recoil detection analysis (ToF-ERDA) spectrometer recently installed at the University of Jyväskylä. In TOF-E measurements 63Cu, 35Cl, 12C and 4He ions…

Time-of-flight - Energy spectrometer for elemental depth profiling - Jyväskylä design

2014

Abstract A new time-of-flight elastic recoil detection spectrometer has been built, and initially the main effort was focused in getting good timing resolution and high detection efficiency for light elements. With the ready system, a 154 ps timing resolution was recorded for scattered 4.8 MeV 4 He 2+ ions. The hydrogen detection efficiency was from 80% to 20% for energies from 100 keV to 1 MeV, respectively, and this was achieved by having an additional atomic layer deposited Al 2 O 3 coating on the first timing detector’s carbon foil. The data acquisition system utilizes an FPGA-card to time-stamp every time-of-flight and energy event with 25 ns resolution. The different origins of the ba…

Improvement of time-of-flight spectrometer for elastic recoil detection analysis

2013

Una tabla inédita de Fernando Yáñez y nueva luz sobre su estancia en Almedina (1518-1525)

2020

The contribution presents a new acquisition for the catalog of Fernando Yáñez, a Holy Family dating back to 1523, shedding new light on the artist?s production in the third decade of the sixteenth century during his return to Almedina, his birthplace, in a time frame that divides the works for Valencia, like the retablo mayor for the city?s cathedral, from his altarpieces for Cuenca.