Search results for "Lasers"
showing 10 items of 316 documents
Dissipative soliton resonance in a full polarization-maintaining fiber ring laser at different values of dispersion
2016
We investigated the dissipative solitons resonance in an ytterbium-doped fiber ring laser in which all the elements are polarization maintaining (PM). A semiconductor saturable absorber mirror was used as a mode-locker. The cavity included a normal dispersion single-mode fiber (SMF) and an anomalous dispersion photonic crystal fiber. The change of the length of the PM SMF allows the variation of the net-normal dispersion of the cavity in the range from 0.022 ps2 to 0.262 ps2. As the absolute value of the net-normal dispersion increases from 0.022 ps2 to 0.21 ps2, a square-shaped single pulse transformed to a single right-angle trapezoid-shaped pulse, and, at the dispersion of 0.262 ps2, to …
GaInNAs/GaAs Bragg-mirror-based structures for novel 1.3μm device applications
2004
We report the use of GaInNAs/GaAs material system for a range of 1.3 μm vertical-cavity devices namely VCSELs, VCSOAs, VECSELs and SESAMs. Using optical pumping, we demonstrate that up to 4 mW of 1290 nm output power can be fibre-coupled from a VCSEL. We also show that tayloring the VCSEL structure allows to produce a monolithic long-wavelength VCSOA with up to 16 dB of gain. We also report the first demonstration of a 1.3 μm VECSEL with more than 0.5 W of CW ouptut power. Finally, annealing effects on the properties of a GaInNAs SBR and modelocking of two Nd:doped solid state lasers using this element are described.
Design of Er3+-doped chalcogenide glass laser for MID-IR application
2009
Abstract The feasibility of a photonic crystal fiber laser (PCF laser), made of a novel Er 3+ -doped chalcogenide glass and operating at the wavelength λ s = 4.5 μm is investigated. The design is performed on the basis of spectroscopic and optical parameters measured on a fabricated Er 3+ -doped Ga 5 Ge 20 Sb 10 S 65 chalcogenide bulk sample. The simulations have been performed by employing a home made numerical code that solves the multilevel rate equations and the power propagation equations via a Runge-Kutta iterative method. The numerical results indicate that a laser exhibiting slope efficiency close to the maximum theoretical one and a wide tunability in the wavelengths range where t…
Q switching and mode locking pulse generation from an all-fiber ring laser by intermodal acousto-optic bandpass modulation
2018
Q-switched and mode-locked (QML) pulse generation from an all-fiber ring laser based on intermodal acousto-optic bandpass modulation is reported. The modulator relies on full-acousto-optic mode re-coupling cycle induced by a standing flexural acoustic wave, with a transmission response that is controlled by amplitude modulation of the acoustic wave signal. The Q factor of the cavity is controlled by a rectangular pulse wave with variable frequency and duty cycle, whereas mode locking is achieved by amplitude modulation derived from a standing flexural acoustic wave. The best QML pulses were obtained at 0.5 kHz repetition rate, with a pump power of 549.2 mW, at the optical wavelength of 1568…
Silicon-microring into a fiber laser cavity for high-repetition-rate pulse train generation
2017
International audience; In 1997, Yoshida et al. inserted a Fabry-Perot filter in a modulation instability fiber laser cavity [1], the free spectral range (FSR) of the Fabry-Perot fixed the RF to 115 GHz; however the pulsed laser was poorly stable. Since then, lasers of increasing performance have been demonstrated using variants of this method. In 2012, Peccianti et al., demonstrated the first fiber laser harmonically mode-locked by integrated high-finesse microresonator [2]. The doped silica, on-chip microresonator provided both high spectral selectivity and nonlinearity, thus promoting the dynamics pulsed at 200 GHz. By using a silicon microring resonator (SMRR), this approach lead to the…
Spatiotemporal pulse shaping with multimode nonlinear guided waves
2018
We experimentally and theoretically investigate complex temporal pulse reshaping that accompanies Kerr beam self-cleaning in multimode optical fibers. We also study the output beam shape dependence on initial conditions.
Experimental study of an in-fiber acousto-optic tunable bandpass filter for single- and dual-wavelength operation in a thulium-doped fiber laser
2019
A tunable single- and dual-wavelength thulium-doped all-fiber laser is demonstrated based on the implementation of an in-fiber acousto-optic tunable bandpass filter (AOTBF). The AOTBF is fabricated to be operated in the 1.9 µm region, and takes advantage of the intermodal coupling effect produced by traveling flexural acoustic waves in an optical fiber. It exhibits a 3-dB bandwidth of 2.04 nm with an insertion loss of 4.75 dB. The tuning properties of the AO device allows a continuous-wave operation with characteristics of wide tuning range (211.5 nm), narrow linewidth (50 pm) and high signal-to-noise ratio (60 dB). In the dual-wavelength regime, the laser is capable of independent tuning o…
Excited-state absorption in erbium-doped silica fiber with simultaneous excitation at 977 and 1531 nm
2009
We report a study of the excited-state absorption (ESA) in erbium-doped silica fiber (EDF) pumped at 977 nm, when the fiber is simultaneously excited by signal radiation at 1531 nm. We show, both experimentally and theoretically, that ESA efficiency at 977 nm gets strongly enhanced only in the presence of signal power. Experimentally, this conclusion is supported through the detection of upconversion emission, a “fingerprint” of the ESA process, and through the measurements of the EDF nonlinear transmission coefficient for the pump wavelength, which is sensitive to the ESA value. It is shown that the experimental data are precisely modeled with an advanced five-level Er3+ model developed fo…
Single-shot digital holography by use of the fractional Talbot effect
2009
We present a method for recording in-line single-shot digital holograms based on the fractional Talbot effect. In our system, an image sensor records the interference between the light field scattered by the object and a properly codified parallel reference beam. A simple binary two-dimensional periodic grating is used to codify the reference beam generating a periodic three-step phase distribution over the sensor plane by fractional Talbot effect. This provides a method to perform single-shot phase-shifting interferometry at frame rates only limited by the sensor capabilities. Our technique is well adapted for dynamic wavefront sensing applications. Images of the object are digitally recon…
Ultra-sensitive fluorescence spectroscopy of isolated surface-adsorbed molecules using an optical nanofiber.
2009
The strong radial confinement and the pronounced evanescent field of the guided light in optical nanofibers yield favorable conditions for ultra-sensitive surface spectroscopy of molecules deposited on the fiber. Using the guided mode of the nanofiber for both excitation and fluorescence collection, we present spectroscopic measurements on 3,4,9,10-perylenetetracarboxylic dianhydride molecules (PTCDA) at ambient conditions. Surface coverages as small as 1 per thousand of a compact monolayer still give rise to fluorescence spectra with a good signal to noise ratio. Moreover, we analyze and quantify the self-absorption effects due to reabsorption of the emitted fluorescence light by circumjac…