Search results for "Limit of Detection"
showing 10 items of 146 documents
Stability of Plant Sterols in Ingredients Used in Functional Foods
2011
The content of plant sterol (PS) and their oxidation products (POPs) in eight ingredients used to enrich functional foods was studied. A gas chromatographic (GC) technique with mass-spectrometric detection was used for identification, while GC with a flame ionization detector (GC-FID) was used for quantification. β-Sitosterol was the most abundant phytosterol, and the main POPs found were derived from this compound (7α/β-hydroxysitosterol, 7-ketositosterol, and sitostanetriol). The total amount of POPs found in the ingredients ranged from 29.03 to 110.02 μg/100 g PS. The β-sitosterol oxidation rates ranged from 10 to 50 μg β-sitosterol oxides/100 g of β-sitosterol. In view of this low rate …
RP-HPLC-DAD determination of the differences in the polyphenol content of Fucus vesiculosus extracts with similar antioxidant activity.
2021
Abstract Significant quantities of bioactive compounds have been found in the chemical composition of seaweeds. This source of natural antioxidants such as polyphenols appears to attenuate lipid peroxidation caused by oxidative stress, preventing the harmful effects of a number of injuries including ischemia–reperfusion (I/R). Conventional extraction (CE) has been used for years as a traditional method for obtaining bioactive components from seaweeds. However, recent studies highlight ultrasonic-assisted extraction (UAE) as an alternative and more eco-friendly technique. Therefore, the two methods were optimised and compared to obtain a Fucus vesiculosus extract (FVE) with high antioxidant …
Development of a new multi-analyte assay for the simultaneous detection of opioids in serum and other body fluids using liquid chromatography-tandem …
2015
Abstract A liquid chromatography–tandem mass spectrometry method using electrospray ionization in positive ionization mode was developed for the simultaneous detection of multiple opioid-type drugs in plasma. The presented assay allows the quantitative determination of alfentanil, buprenorphine, codeine, desomorphine, dextromethorphan, dextrorphan, dihydrocodeine, dihydromorphine, ethylmorphine, fentanyl, hydrocodone, hydromorphone, methadone, morphine, naloxone, naltrexone, oxycodone, oxymorphone, pentazocine, pethidine, pholcodine, piritramide, remifentanil, sufentanil, and tramadol as well as the metabolites 6-monoacetylmorphine, bisnortilidine, morphine-3-glucuronide, morphine-6-glucuro…
Application of Dopant-Assisted Atmospheric Pressure Photoionisation HPLC–MS Method for the Sensitive Determination of Polycyclic Aromatic Hydrocarbon…
2017
Multiple food research studies have shown that the polycyclic aromatic hydrocarbon (PAHs) are frequently found in processed cocoa products and chocolate. In a present study a method based on dopant-assisted atmospheric pressure photoionisation (DA-APPI) combined with a liquid chromatography/high-resolution mass spectrometer (HPLC-HRMS) for high-sensitivity analysis of four EU marker PAHs in dark chocolate samples was developed and fully validated according to the performance criteria set in EU guidelines. PAHs detection was achieved by HRMS in positive electrospray ionization mode with toluene used as a dopant to enhance the ionization efficiency of non-polar PAHs. The on-column instrument …
Development and validation of a micellar liquid chromatographic method to determine three antitumorals in plasma
2017
Aim: A micellar liquid chromatographic method to determine several anticancer drugs (pazopanib, dabrafenib and regorafenib) in plasma was developed and validated by the guidelines of the EMA. Experimental: Plasma samples were directly injected, after a 1/5-dilution in a micellar solution. The drugs were resolved in <18 min using a C18 column. The mobile phase was an aqueous solution of 0.12 M SDS – 2% 1-pentanol, buffered at pH 7. The detection was performed by absorbance at 260 nm. Results: The values of the main validation parameters were: LOD (0.1–1 mg/l), calibration range (0.2–2 to 80 mg/l), accuracy (-12.5 to +11.7%) and precision (<11.9%). Conclusion: The procedure was conduct…
Determination of hydroxytyrosol and tyrosol by liquid chromatography for the quality control of cosmetic products based on olive extracts
2014
An analytical method for the simultaneous determination of hydroxytyrosol and tyrosol in different types of olive extract raw materials and cosmetic cream samples has been developed. The determination was performed by liquid chromatography with UV spectrophotometric detection. Different chromatographic parameters, such as mobile phase pH and composition, oven temperature and different sample preparation variables were studied. The best chromatographic separation was obtained under the following conditions: C18 column set at 35°C and isocratic elution of a mixture ethanol: 1% acetic acid solution at pH 5 (5:95, v/v) as mobile phase pumped at 1 mL min(-1). The detection wavelength was set at …
Exploring hand-portable nano-liquid chromatography for in place water analysis: Determination of trimethylxanthines as a use case.
2020
Abstract Analytical performance and optimization of figures of merit of a portable nano liquid chromatograph (NanoLC) with UV detection at 255 nm have been established for in place analysis. Methylxanthines: caffeine, theophylline and theobromine were selected as target analytes. A fast lab method based on IT-SPME coupled on line with capillary liquid chromatograph (CapLC) with diode array detection (DAD) was employed for comparative studies. IT-SPME and solid phase extraction were coupled off-line to NanoLC for improving instrumental parameters, mainly detection capacity and selectivity. IT-SPME or SPE/portable NanoLC based methods were superior in terms of chromatographic resolution and o…
Sensitive determination of parabens in human urine and serum using methacrylate monoliths and reversed-phase capillary liquid chromatography-mass spe…
2014
A method for the determination of parabens in human urine and serum by capillary liquid chromatography (cLC) with UV-Vis and mass spectrometry (MS) detection using methacrylate ester-based monolithic columns has been developed. The influence of composition of polymerization mixture was studied. The optimum monolith was obtained with butyl methacrylate monomer at 60/40% (wt/wt) butyl methacrylate/ethylene dimethacrylate ratio and 50wt% porogens (composed of 36wt% of 1,4-butanediol, 54wt% 1-propanol and 10wt% water). Baseline resolution of analytes was achieved through a mobile phase of acetonitrile/water in gradient elution mode. Additionally, dispersive liquid-liquid microextraction (DLLME)…
Quantification of nortriptyline in plasma by HPLC and fluorescence detection
2009
Abstract A simple, sensitive and specific high-performance liquid chromatography method has been developed for the determination of nortriptyline (NT) in plasma samples. The assay involved derivatization with 9H-fluoren-9-ylmethyl chloroformate (Fmoc-Cl) and isocratic reversed-phase (C 18 ) chromatography with fluorescence detection. The developed method required only 100 μl of plasma sample, deproteinized and derivatized in one step. Calibration curves were lineal over the concentration range of 5–5000 ng/ml. The derivatization reaction was performed at room temperature in 20 min and the obtained NT derivative was stable for at least 48 h at room temperature. The within-day and between-day…
Determination of N-nitrosodiethanolamine in cosmetic products by reversed-phase dispersive liquid-liquid microextraction followed by liquid chromatog…
2016
A new analytical method for the determination of N-nitrosodiethanolamine (NDELA), a very harmful compound not allowed in cosmetic products, is presented. The method is based on a new approach of dispersive liquid-liquid microextraction (DLLME) useful for extraction of highly polar compounds, called reversed-phase DLLME (RP-DLLME), followed by liquid chromatography-ultraviolet/visible (LC-UV/Vis) determination. The variables involved in the RP-DLLME process were studied to provide the best enrichment factors. Under the optimized conditions, a mixture of 750µL of acetone (disperser solvent) and 125µL of water (extraction solvent) was rapidly injected into 5mL of toluene sample solution. The e…