Search results for "MICI"
showing 10 items of 1671 documents
Parametrical study of multilayer structures for CIGS solar cells
2014
In this paper, a numerical analysis of relevant electrical parameters of multilayer structures for CIGS-based solar cells was carried out, employing the simulation software wxAMPS. In particular, we have focused on thin film cells having a ZnO:Al/ZnO/CdS/CIGS structure with a Molybdenum back contact. The aim of this work is to establish good theoretical reference values for an ongoing experimental activity, where our technology of choice is the single-step electrodeposition. In detail, we have analyzed how the main electrical properties change with the bang gap and the thickness of the absorber layer, for such a type of solar cell structure. Our results show that both efficiency and fill fa…
Effects of Nylon 6,6 Nanofibrous Mats on Thermal Properties and Delamination Behavior of High Performance CFRP Laminates
2014
none 8 no Nylon 6,6 electrospun nanofibrous membranes interleaved in Carbon Fibre Reinforced Plastic (CFRP) laminates have been proposed as a means to provide a higher threshold value to delamination on structural sites where composites are more prone to develop such failure. A model, highly crosslinked thus inherently brittle, epoxy matrix was selected for its high Young’s modulus and glass transition temperature exceeding 250 °C. The influence of the Nylon 6,6 nanofibres on the curing behaviour of the matrix and on the thermal and dynamic mechanical properties of the cured resin was investigated. These properties were related to the features of the epoxy resin and of the resin impregnated…
Heteropolyacids supported on boron nitride and carbon nitride for catalytic and catalytic photo-assisted alcohol dehydration
2021
Keggin H3PW12O40 (PW12) and Wells-Dawson H6P2W18O60 (P2W18) heteropolyacids (HPAs) are photo(catalysts) for various acid-promoted and redox catalytic reactions. Their activity increases if they are deposited on certain supports as metal oxides or carbon materials. Although the surface area and acid-base interactions of the HPAs with supports are considered as key factors for the performance of the binary material, the role of the local structure changes in the HPAs upon their immobilization on solids must be also of primary importance, directly affecting both acidity and photoredox properties. Here, the (photo)catalytic performance of Keggin and Wells-Dawson heteropolytungstates supported o…
Heteropolyacid-Based Heterogeneous Photocatalysts for Environmental Application
2015
Polyoxometalates (POMs) are a wide class of discrete nanosized transition metal–oxygen clusters. The synthesis of POMs has received great interest not only because they present intriguing architectures but also because they have potential applications in catalysis, medicine, electrochemistry, materials design or models for self-assembling nanoscale systems. Recently, POMs have also been studied as green and cheap photocatalysts. The potentialities of POMs are attributed to their unique structural features; indeed, POMs are photostable and non-toxic, have oxygen-rich surfaces and excellent redox properties and possess photochemical characteristics similar to those of the semiconductor photoc…
Reflection-refraction effects on light distribution inside tubular photobioreactors
2017
One of the main parameters affecting autotrophic algae cultures is photon absorption distribution inside the photobioreactor. This clearly depends on the geometry of both the radiation source and the photobioreactor, as well as on algae suspension optical properties. In this work the local volumetric rate of photon absorption LVRPA in a cross-section of a horizontal-pipe photobioreactor was investigated by means of simplified Monte Carlo simulations. In particular, the fate of a number of photons perpendicularly hitting the photobioreactor circular section was simulated in relation to different values of algae concentration. The model takes into account refraction/reflection phenomena at th…
E-beam irradiation and UV photocrosslinking of microemulsion-laden poly(N-vinyl-2-pyrrolidone) hydrogels for ‘‘in situ’’ encapsulation of volatile hy…
2011
Gelled microemulsions are the subject of considerable scientific and commercial interest. Many efforts are currently devoted to improving their toxicological profile and functioning as biocompatible diffusion barrier for the controlled delivery of hydrophobic compounds. In the present investigation, a non-ionic polymeric surfactant was chosen to generate an oil-in-water microemulsion of a model fragrance in the presence of poly(N-vinyl-2-pyrrolidone) (PVP). The microemulsion was then subjected to either electron-beam or UV-irradiation to induce free-radical crosslinking of PVP at low temperature and in the absence of crosslinking agents, catalysts and initiators. Irradiation conditions with…
Hydrogel films engineered in a mesoscopically ordered structure and responsive to ethanol vapors
2014
Abstract Responsive hydrogels filling the interstitial spaces of photonic crystals can form mesoscopically structured materials, which exhibit reversible shifts in the Bragg diffracted light as a response of environmental changes. These materials can be used to generate chemical or biochemical sensors. The present work reports on the synthesis and characterization of ethanol responsive hydrogels that can be used in the design of novel breathalyzers. The dynamic mechanical behavior of the macroscopic hydrogels and their swelling features in the presence of different liquids or vapors have been investigated to orientate the choice of the best responsive material and curing process. The swelli…
Smart hydrogels for novel optical functions
2007
Nanocomposites of inherently conductive polyaniline (PANT) within a highly hydrophilic polyvinyl alcohol (PVA) based hydrogel have been produced by coupling a conventional dispersion chemical oxidative polymerization to a subsequent high energy irradiation step, in order to convert the polymer stabilizing the aqueous dispersion, namely the PVA, into a highly water swollen hydrogel incorporating the PANT particles. The incorporation of the electroactive and "pH-sensitive" polymer into a transparent and highly permeable hydrogel matrix has been pursued as a route to the development of a novel class of potentially biocompatible, smart hydrogels that can respond to changes of the surrounding en…
Inherently fluorescent polyaniline nanoparticles in a dynamic landscape
2012
Abstract In this paper we report for the first time on the emissive behavior of two polyaniline (PANI) nanoparticle systems produced via oxidative chemical polymerization in the presence of either poly(vinyl alcohol) (PVA) or chitosan as polymeric stabilizers in water. The emission from PANI nanoparticles is irreversibly quenched by an increase of pH of the suspending medium from acid to neutral (chitosan–PANI) or alkaline (PVA–PANI). Conversely, PANI nanorods synthesized in the same conditions of the above, but in presence of poly(N-vinyl pyrrolidone), is not emissive at any pH. The role of the polymeric surfactant as a soft template is key in controlling the morphology and the properties …
Micro- to Nanoscale Bio-Hybrid Hydrogels Engineered by Ionizing Radiation
2021
Bio-hybrid hydrogels consist of a water-swollen hydrophilic polymer network encapsulating or conjugating single biomolecules, or larger and more complex biological constructs like whole cells. By modulating at least one dimension of the hydrogel system at the micro- or nanoscale, the activity of the biological component can be extremely upgraded with clear advantages for the development of therapeutic or diagnostic micro- and nano-devices. Gamma or e-beam irradiation of polymers allow a good control of the chemistry at the micro-/nanoscale with minimal recourse to toxic reactants and solvents. Another potential advantage is to obtain simultaneous sterilization when the absorbed doses are wi…