Search results for "MXene"
showing 8 items of 8 documents
2020 Roadmap on two-dimensional nanomaterials for environmental catalysis
2019
Abstract Environmental catalysis has drawn a great deal of attention due to its clean ways to produce useful chemicals or carry out some chemical processes. Photocatalysis and electrocatalysis play important roles in these fields. They can decompose and remove organic pollutants from the aqueous environment, and prepare some fine chemicals. Moreover, they also can carry out some important reactions, such as O2 reduction reaction (ORR), O2 evolution reaction (OER), H2 evolution reaction (HER), CO2 reduction reaction (CO2RR), and N2 fixation (NRR). For catalytic reactions, it is the key to develop high-performance catalysts to meet the demand for targeted reactions. In recent years, two-dimen…
Investigation of AC Electrical Properties of MXene-PCL Nanocomposites for Application in Small and Medium Power Generation
2021
The paper examined Ti3C2Tx MXene (T—OH, Cl or F), which is prepared by etching a layered ternary carbide Ti3AlC2 (312 MAX-phase) precursor and deposited on a polycaprolactone (PCL) electrospun membrane (MXene-PCL nanocomposite). X-ray Diffraction analysis (XRD) and Scanning Electron Microscopy (SEM) indicates that the obtained material is pure Ti3C2 MXene. SEM of the PCL-MXene composite demonstrate random Ti3C2 distribution over the nanoporous membrane. Results of capacitance, inductance, and phase shift angle studies of the MXene-PCL nanocomposite are presented. It was found that the frequency dependence of the capacitance exhibited a clear sharp minima in the frequency range of 50 Hz to o…
Strain Sensing Coatings for Large Composite Structures Based on 2D MXene Nanoparticles
2021
Real-time strain monitoring of large composite structures such as wind turbine blades requires scalable, easily processable and lightweight sensors. In this study, a new type of strain-sensing coating based on 2D MXene nanoparticles was developed. A Ti3C2Tz MXene was prepared from Ti3AlC2 MAX phase using hydrochloric acid and lithium fluoride etching. Epoxy and glass fibre–reinforced composites were spray-coated using an MXene water solution. The morphology of the MXenes and the roughness of the substrate were characterised using optical microscopy and scanning electron microscopy. MXene coatings were first investigated under various ambient conditions. The coating experienced no sign…
Deformation and failure of MXene nanosheets
2020
This work is aimed at the development of finite element models and prediction of the mechanical behavior of MXene nanosheets. Using LS-Dyna Explicit software, a finite element model was designed to simulate the nanoindentation process of a two-dimensional MXene Ti3C2Tz monolayer flake and to validate the material model. For the evaluation of the adhesive strength of the free-standing Ti3C2Tz-based film, the model comprised single-layered MXene nanosheets with a specific number of individual flakes, and the reverse engineering method with a curve fitting approach was used. The interlaminar shear strength, in-plane stiffness, and shear energy release rate of MXene film were predicted using th…
Numerical investigation of the mechanical properties of a novel hybrid polymer composite reinforced with graphene and MXene nanosheets
2020
Abstract This paper presents a numerical investigation of the elastic properties of a novel hybrid polymer composite reinforced with graphene and MXene nanosheets. A finite element computational model was developed to analyze the mechanical properties of a new polymer hybrid composite reinforced with MXene and graphene taking into account the properties of the 2D nanosheets, different aspect ratios, placement options and volume fractions of nanoreinforcements, as well as the interaction effects between the nanofillers and the surrounding polymer matrix. Using the developed numerical model, the influences of the interface layer properties, MXene and graphene aspect ratio, alignment and volum…
Novel hybrid polymer composites with graphene and MXene nano-reinforcements: computational analysis
2021
This paper presents a computational analysis on the mechanical and damage behavior of novel hybrid polymer composites with graphene and MXene nano-reinforcements targeted for flexible electronics and advanced high-strength structural applications with additional functions, such as real-time monitoring of structural integrity. Geometrical models of three-dimensional representative volume elements of various configurations were generated, and a computational model based on the micromechanical finite element method was developed and solved using an explicit dynamic solver. The influence of the geometrical orientation, aspect ratio, and volume fractions of the inclusions, as well as the interfa…
Wettability of MXene and its interfacial adhesion with epoxy resin
2021
Abstract The surface energies of MXene nanofillers critically affect the mechanical properties and durability of any polymer-based devices and composites to which these fillers are applied. In this context, this study comprehensively investigates Ti3C2Tz MXenes prepared via the hydrochloric acid/lithium fluoride etching of Ti3AlC2. The surface energy values of 10-layer MXene coatings were evaluated to be between 47.98 and 64.48 mJ/m2 as per contact-angle measurements. The wettability properties were found to depend on the number of coating layers and the liquids used. Additionally, the coating roughness was evaluated by using atomic force microscopy. The effectiveness of MXenes as a reinfor…
Titāna dioksīda – MXenes kompozītmateriāla biosaderības noteikšana
2022
Titāns un tā sakausējumu unikālās fizikālās un ķīmiskās īpašības padara tos par visbiežāk izmantotajiem metāliskajiem biomateriāliem, pateicoties to bioloģiskajai saderībai. Savukārt MXenes ir jauna neorganisko savienojumu klase ar divdimensiju struktūru, kas ar savu īpatnējo virsmas laukumu, daudzsološajām mehāniskajām, elektroniskajām un fizikāli ķīmiskajām īpašībām, un lielisko bioloģisko saderību, iespējams, varētu uzlabot titāna savienojumu bioaktivitāti, tādējādi palielinot implantu osseointegrāciju. Titāna dioksīda un MXene kompozītmateriāla raksturošanai izmantoja skenējošo elektronu mikroskopiju un Furjē trasformācijas infrasarkano spektroskopiju, savukārt, biosaderību ar cilvēka d…