Search results for "Materials Chemistry2506 Metals and Alloy"
showing 8 items of 98 documents
Effect of Plasma Treatment on Mechanical and Thermal Properties of Marble Powder/Epoxy Composites
2016
The aim of this work was to study the effect of the plasma treatment on the behavior of composite structures reinforced with marble powder, obtained as processing waste in the “Custonaci” basin. Moreover, different filler amounts (i.e. 10%wt, 20%, 30% in weight) were investigated. For the mechanical characterization, tensile and flexural quasi-static tests, Charpy impact test, and dynamic mechanical thermal analysis (DMTA) were performed. For the thermal stability, thermogravimetric analysis was carried out. Finally, real density and fraction of voids were measured. It was observed that untreated marble powder, on one hand, increases tensile and flexural stiffness and improves thermal stabi…
Pull-off adhesion of hybrid glass-steel adhesive joints in salt fog environment
2016
The aim of this paper was to evaluate the durability behaviour of glass/steel adhesive joints exposed to salt fog environmental conditions for ten weeks, according to ASTM B117 standard. To this scope, pull-off mechanical tests were carried out in order to evaluate the performances evolution and damage phenomena of the adhesive joints during the ageing exposition. Two different types of adhesives were compared (i.e. epoxy and polyurethane ones). Moreover, the effects of the glass surface condition and the presence of a basalt mat layer within the adhesive thickness were evaluated. The mechanical performances were related with the occurred failure mechanisms. Epoxy-based joints showed higher…
Symmetric naphthalenediimidequaterthiophenes for electropolymerized electrochromic thin films
2015
A new symmetric naphthalenediimidequaterthiophene (s-NDI2ODT4) was synthesized and exhibited the capability to electropolymerize alone or with EDOT affording polymers with controlled donor/acceptor monomer ratios. s-NDI2ODT4-EDOT-based copolymers showed low band gaps, wide optical absorption ranges extending to the near IR region, tuned electrical properties, thin-film surface morphology and hydrophilicity as well as high coloration efficiency in electrochromic devices.
Effect of air on oxygen p-doped graphene on SiO2
2016
Stability in ambient air or in vacuum-controlled atmosphere of molecular oxygen-induced p-type doping of graphene monolayer on SiO2 substrate on Si is investigated by micro-Raman spectroscopy and atomic force microscopy (AFM). The Raman 2D and G bands spectral positions and amplitude ratio are affected by the permanence in air atmosphere in a time scale of months whereas the vacuum safely maintains the doping effects determined through Raman bands. No morphological effects are induced by the doping and post-doping treatments. A reactivity of ambient molecular gas with stably trapped oxygen is suggested to induce the doping modification. (C) 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
Novel organo-modifier for thermally-stable polymer-layered silicate nanocomposites
2015
A new novel approach for the stabilisation of polymer-clay nanocomposites has been investigated based on reacting chemically an antioxidant function, a hindered phenol moiety, with an organic modifier based on a quaternary ammonium salt. The chemically linked antioxidant-containing organic modifier (AO-OM) was then introduced into natural montmorillonite (MMt) through a cation-exchange reaction resulting in antioxidant-containing organo-modified clay (AO-OM-MMt). The new antioxidant-containing modified clay, along with other organo-modified clays having a similar organo-modifier but without the reacted antioxidant, were characterised by spectroscopic, thermogravimetric and x-ray diffraction…
Melt Processed PCL/PEG Scaffold with Discrete Pore Size Gradient for Selective Cellular Infiltration
2016
In order to develop scaffold able to mimic the natural gradient properties of tissues, biphasic and triphasic approaches were adopted. In this work, polycaprolactone/polyethylene glycol (PCL/PEG) scaffolds were prepared by using a combination of melt mixing and selective leaching without harmful solvents. The method permitted to develop three-layer scaffolds with high control of porosity and pore size. The mechanical properties were evaluated under physiological condition in order to simulate the real conditions of work. Co-culture of osteoblastic and fibroblastic mice cells were carried out in order to study the differential cellular permeation through the different pore size layers.
Amphoteric, prevailingly cationic L-arginine polymers of poly(amidoamino acid) structure: Synthesis, acid/base properties and preliminary cytocompati…
2013
A linear amphoteric poly(amidoamino acid), L-ARGO7, is prepared by Michael-type polyaddition of L-arginine with N,N′-methylenebisacrylamide. Chain-extension of acrylamide end-capped L-ARGO7 oligomers with piperazine leads to high-molecular-weight copolymers in which L-arginine maintains its absolute configuration. Acid/base properties of L-ARGO7 polymers show isolectric points of ≈10 and positive net average charges per repeating unit at pH = 7.4 from 0.25 to 0.40. These arginine-rich synthetic polymers possibly share some of the unique biological properties of polyarginine cell-permeating peptides. In vitro tests with mouse embryo fibroblasts balb/3T3 clone A31 show that L-ARGO7 polymers a…
Hetero-difunctional dimers as building blocks for the synthesis of poly(amidoamine)s with hetero-difunctional chain terminals and their derivatives
2012
This article reports on a simple and straightforward preparation method of poly(amidoamine)s (PAAs) with hetero-difunctional chain ends as well as of several up to now hardly obtainable PAA derivatives of biotechnological interest, such as for instance PAAs of controlled molecular weight and narrow polydispersity mono-functionalized at one end with an acrylamide group, PAAs with star-like molecular architecture, graft-PAA-protein conjugates, “tadpole-like” PAA conjugates with hydrophobic moieties able to self assemble into nanoparticles in aqueous media. The key step was to design suitable building blocks consisting of hetero-difunctional dimers (HDDs). In particular, the HDDs considered we…