Search results for "Missions"
showing 10 items of 380 documents
The Status of the Ultra Fast Flash Observatory - Pathfinder
2012
On behalf of the UFFO Collaboration; International audience; The Ultra Fast Flash Observatory (UFFO) is a project to study early optical emissions from Gamma Ray Bursts (GRBs). The primary scientific goal of UFFO is to see if GRBs can be calibrated with their rising times, so that they could be used as new standard candles. In order to minimize delay in optical follow-up measurements, which is now about 100 sec after trigger from the Swift experiment, we rotate a mirror to redirect light path so that optical measurement can be performed within a second after the trigger. We have developed a pathfinder mission, UFFO-pathfinder to launch on board the Lomonosov satellite in 2012. In this talk,…
Calibration of the Lunar Orbital X-ray Fluorescence Imaging Spectrometer (LOXIA) of Chang'E-1 satellite at INAF-OAPA
2007
The Lunar Orbital X-ray Fluorescence Imaging Spectrometer (LOXIA) designed and constructed at the Institute of High Energy Physics of the Chinese Academy of Sciences to perform chemical composition analysis of the Moon surface will operate on-board the Chang'E-1 mission, the first Chinese lunar spacecraft to be launched in 2007. We report the main results of the calibration measurements that we have performed using the X-ray beamline of the XACT facility of INAFOsservatorio Astronomico di Palermo G.S. Vaiana to determine the quantum efficiency of the XRS detector in the soft X-rays as a function of photon energy and angle of incidence.
Environmental impact of magmatic fluorine emission in the Mt. Etna area
2007
-UniversitA degli Studi di Palermo, Italy -Istituto Nazionale di Geofisica e Vulcanologia, Sezione di Palermo - Unione Europea, Fondo Sociale Europeo
Estimating pollutant emissions based on speed profiles at urban roundabouts: A pilot study
2019
The paper describes the pilot study conducted to assess the feasibility of the empirical approach utilizing vehicle trajectory data from a smartphone app and the Vehicle-Specific Power methodology to estimate pollutant emissions at urban roundabouts. The goal of this research phase is to acquire instantaneous speed data from a sample of six roundabouts located in the road network of the City of Palermo, Italy, and quantify emissions generated by the test vehicle through the examined roundabouts. For the case studies of roundabouts acceleration events in the circulating and exiting areas contributed to about 25% of the emissions for a given speed profile. More in general, the results from th…
A model for evaluating the environmental and functional benefits of “innovative” roundabouts
2015
This study looks at the singling out of a multi-parameter criterion for choosing conventional or innovative roundabout layouts, by taking functional, environmental and economic aspects into consideration. The performances of three conventional roundabouts (with different lane number at entries and through the ring), turbo-roundabouts and roundabouts with right-turn bypass lane on all the arms (flower roundabouts) have been compared in terms of vehicle delays and pollutant (carbon dioxide, nitrogen oxides, particle pollution (PM10 and PM2.5)) emissions. By means of closed-form capacity models and with the help of COPERT IV© software, several traffic simulations have been carried out, referre…
One-year characterization of organic aerosol markers in urban Beijing: Seasonal variation and spatiotemporal comparison
2020
Abstract Organic aerosol (OA) is a major component of fine particulate matter (PM); however, only 10%–30% of OA have been identified as individual compounds, and some are used as markers to trace the sources and formation mechanisms of OA. The temporal and spatial coverage of these OA markers nonetheless remain inadequately characterized. This study presents a year-long measurement of 92 organic markers in PM2.5 samples collected at an urban site in Beijing from 2014 to 2015. Saccharides were the most abundant (340.1 ng m−3) species detected, followed by phthalic acids (283.4 ng m−3). In summer, high proportions (8%–24%) of phthalic acids, n-alkanes, fatty acids, and n-alcohols indicate dom…
Heavy metals in urban soils: a case study from the city of Palermo (Sicily), Italy.
2002
Concentrations of V, Mn, Cd, Zn, Ni, Cr, Co, Cu, Pb, Hg and Sb were measured on 70 topsoil samples collected from green areas and parks in the city of Palermo (Sicily) in order to: (1) assess the distribution of these heavy metals in the urban environment; (2) discriminate natural and anthropic contributions; and (3) identify possible sources of pollution. Mineralogy, physico-chemical parameters, and major element contents of the topsoils were determined to highlight the influence of 'natural' features on the heavy metal concentrations and their distribution. Medians of Pb, Zn, Cu and Hg concentrations of the investigated urban soils are 202, 138, 63 and 0.68 mgkg(-1), respectively. These v…
Determining exhaust fumes exposure in chainsaw operations
2016
Abstract The objective of this study was to investigate the inhalation exposure of forest operators to polycyclic aromatic hydrocarbons (PAHs) and BTEX (benzene, toluene, ethylbenzene and total xylenes) contained in the exhaust fumes released from chainsaws and to suggest possible countermeasures. The study was carried out in four silvicultural treatments (coppice clearcut, conifer thinning, conifer pruning, and sanitary cut), using three types of chainsaw fuel (normal two-stroke petrol mix and two alkylate fuels). Eighty personal air samples were collected; IOM samplers combined with Amberlite XAD-2 sorbent tubes were used for collecting PAHs and Radiello® samplers were used for BTEX. Resu…
Characteristics of current roadside pollution using test-monitoring plots
2014
Abstract The aim of the study was the qualitative recognition of the existing roadside pollutants deposited in topsoils located close to roads with high traffic volume. So far, the studies have helped to determine the content of pollutants that accumulated over a long period of time. Traditionally, it has been difficult to distinguish between roadside pollution and pollution from other industrial sources. In order to avoid such problems and to accurately recognize present threats originating from road traffic, test-monitoring plots were installed in Poland (Gliwice and Opole), Germany (Tubingen, Ulm and Boblingen), Finland (Helsinki), Tajikistan (Dushanbe) and China (Lanzhou). To install th…
Analysis of Pollutant Emissions on City Arteries—Aspects of Transport Management
2021
The aim of the study is to present a methodology for analyzing pollution emissions in a medium-sized city using modern traffic simulations in the aspect of minimizing exhaust emissions. The scope of the research and the methods of analysis used differ from those applied in big cities projects that can be found in the literature, Therefore the progressive elaboration model has been applied methodically to formulate and carry out the feasibility study. To perform microscopic traffic simulations, the software Simulation of Urban Mobility (SUMO—German Aerospace Center (DLR), Berlin, Germany) was applied. Thanks to the simulations, changes in traffic organization were accurately identified in th…