Search results for "Multiplier"
showing 10 items of 338 documents
Computational methods for optimal shakedown design of FE structures
1998
The paper concerns the optimal shakedown design of structures discretized by elastic perfectly plastic finite elements. The design problem is formulated in four alternative versions, i.e. as the search for the minimum volume design whose shakedown limit load multiplier is assigned or as the search for the maximum shakedown limit load multiplier design whose volume is assigned; both problems are approached on the grounds of the shakedown lower bound and upper bound theorems. Correspondingly four computational methods, one for each original problem, are presented. These methods consist in solving iteratively new problems which are simpler than the original ones, but expressed in such a way th…
Optimization of continuous elastic perfectly plastic beams
2004
Abstract The optimal design of elastic plastic beams subjected to loads quasi-statically variable within a given domain is studied. A minimum volume formulation and a maximum load multiplier formulation are developed, both expressed on the grounds of a statical as well as of a kinematical approach. The search problems are formulated according to three different limiting criteria acting simultaneously. For each criterion a corresponding selected safety factor is imposed. The Euler–Lagrange equations related to the above described problems are deduced. A special iterative technique devoted to the solution of the above referenced problems is proposed. Some numerical examples conclude the paper.
Pushing Through or Slacking Off? Heterogeneity in the Reaction to Rank Feedback
2018
This paper studies heterogeneity in the reaction to rank feedback. In a laboratory experiment, individuals take part in a series of dynamic real-effort contests with intermediate feedback. To solve the identification problem in estimating the causal effect of rank feedback on subsequent effort provision we implement a random multiplier in the first round of each contest. The realization of this multiplier then serves as a valid instrument for rank feedback. While rank feedback has a robust effect on subsequent effort provision on average, an explicit analysis of between-subject heterogeneity reveals that a substantial fraction of participants in fact react entirely opposite than the aggrega…
Operators on Partial Inner Product Spaces: Towards a Spectral Analysis
2014
Given a LHS (Lattice of Hilbert spaces) $V_J$ and a symmetric operator $A$ in $V_J$, in the sense of partial inner product spaces, we define a generalized resolvent for $A$ and study the corresponding spectral properties. In particular, we examine, with help of the KLMN theorem, the question of generalized eigenvalues associated to points of the continuous (Hilbertian) spectrum. We give some examples, including so-called frame multipliers.
The COMPASS Setup for Physics with Hadron Beams
2015
The main characteristics of the COMPASS experimental setup for physics with hadron beams are described. This setup was designed to perform exclusive measurements of processes with several charged and/or neutral particles in the final state. Making use of a large part of the apparatus that was previously built for spin structure studies with a muon beam, it also features a new target system as well as new or upgraded detectors. The hadron setup is able to operate at the high incident hadron flux available at CERN. It is characterised by large angular and momentum coverages, large and nearly flat acceptances, and good two and three-particle mass resolutions. In 2008 and 2009 it was successful…
The Time Calibration System of KM3NeT: The Laser Beacon and the Nanobeacon
2015
The KM3NeT collaboration has started the construction of a deep sea neutrino telescope in the Mediterranean with an instrumented volume of several cubic kilometers. The objective of the KM3NeT telescope is to observe cosmic neutrinos. For this, the detector will consist of a tri-dimensional array of optical modules, each one composed of a pressure resistant glass sphere housing 31 small area photomultipliers. An important element of the KM3NeT detector is the system for the relative time calibration between optical modules with a precision of about 1 ns. The system comprises two independent devices: a nanobeacon inside each optical module for calibration of optical modules in the same verti…
Time of flight measurements based on FPGA using a breast dedicated PET
2014
In this work the implementation of a Time-to-Digital Converter (TDC) using a Nutt delay line FPGA-based and applied on a Positron Emission Tomography (PET) device is going to be presented in order to check the system’s suitability for Time of Flight (TOF) measurements. In recent years, FPGAs have shown great advantages for precise time measurements in PET. The architecture employed for these measurements is described in detail. The system developed was tested on a dedicated breast PET prototype, composed of LYSO crystals and Positive Sensitive Photomultipliers (PSPMTs). Two distinct experiments were carried out for this purpose. In the first test, system linearity was evaluated in order to …
Charge reconstruction in large-area photomultipliers
2018
Large-area PhotoMultiplier Tubes (PMT) allow to efficiently instrument Liquid Scintillator (LS) neutrino detectors, where large target masses are pivotal to compensate for neutrinos' extremely elusive nature. Depending on the detector light yield, several scintillation photons stemming from the same neutrino interaction are likely to hit a single PMT in a few tens/hundreds of nanoseconds, resulting in several photoelectrons (PEs) to pile-up at the PMT anode. In such scenario, the signal generated by each PE is entangled to the others, and an accurate PMT charge reconstruction becomes challenging. This manuscript describes an experimental method able to address the PMT charge reconstruction …
Operation and first results of the NEXT-DEMO prototype using a silicon photomultiplier tracking array
2013
NEXT-DEMO is a high-pressure xenon gas TPC which acts as a technological test-bed and demonstrator for the NEXT-100 neutrinoless double beta decay experiment. In its current configuration the apparatus fully implements the NEXT-100 design concept. This is an asymmetric TPC, with an energy plane made of photomultipliers and a tracking plane made of silicon photomultipliers (SiPM) coated with TPB. The detector in this new configuration has been used to reconstruct the characteristic signature of electrons in dense gas, demonstrating the ability to identify the MIP and "blob" regions. Moreover, the SiPM tracking plane allows for the definition of a large fiducial region in which an excellent e…
Silicon Photomultipliers Signal-to-Noise Ratio in the Continuous Wave Regime
2014
Abstract— We report on Signal-to-Noise Ratio measurements carried out, in the continuous wave regime, at different bias voltages, frequencies and temperatures, on a class of silicon photomultipliers fabricated in planar technology on silicon p- type substrate. Signal-to-Noise Ratio has been measured as the ratio of the photogenerated current, filtered and averaged by a lock-in amplifier, and the Root Mean Square deviation of the same current. The measured noise takes into account the shot noise, resulting from the photocurrent and the dark current. We have also performed a comparison between our SiPMs and a photomultiplier tube in terms of Signal-to-Noise Ratio, as a function of the tempe…