Search results for "Natural fiber"
showing 10 items of 52 documents
LEMONGRASS PLANT LEAF AND CULM AS POTENTIAL SOURCES OF REINFORCEMENT FOR BIO-COMPOSITES
2022
A possible source of natural reinforcement for bio-composites can be represented by lemongrass plant (Cymbopogon flexuosus), a clumped and perennial grass which belongs to the Poaceae family. This plant is extensively used for several applications such as pharmacology, food preservation and cosmetics but, to the best of our knowledge, few papers were published on its use as source for reinforcement of composites and no one article was focused on the comparison between lemongrass leaves and culms as potential source of natural reinforcement. To this aim, a preliminary investigation on leaf and culm fibers was carried out to compare their physical and chemical features as well as their tensil…
Effect of sodium bicarbonate treatment on mechanical properties of flax-reinforced epoxy composite materials
2017
This paper deals with the evaluation of the effect of an eco-friendly and cost-effective surface treatment based on the use of sodium bicarbonate on the mechanical properties of flax-reinforced epoxy composites. To this aim, unidirectional fabrics were soaked for five days in 5 and 10% in weight of sodium bicarbonate solution at 25℃. Quasi-static and dynamic mechanical tests were performed and the fracture surfaces of the composites were analyzed through scanning electron microscopy. Results evidenced that this treatment improves the fiber–matrix adhesion thus increasing the performances of the composites. Treating the fabrics with 10% w/w of bicarbonate solution leads to improvements of ∼…
PBAT Based Composites Reinforced with Microcrystalline Cellulose Obtained from Softwood Almond Shells
2021
This study explores the processability, mechanical, and thermal properties of biocompostable composites based on poly (butylene adipate-co-terephthalate) (PBAT) as polymer matrix and microcrystalline cellulose (MCC) derived from softwood almond (Prunus dulcis) shells (as-MCC) as filler at two different weight concentration, i.e., 10 wt% and 20 wt%. The materials were processed by melt mixing and a commercial MCC (c-MCC) was used as filler comparison. The fibrillar shape of as-MCC particles was found to change the rheological behavior of PBAT, particularly at the highest concentration. The melt mixing processing allowed obtaining a uniform dispersion of both kinds of fillers, slightly reduci…
Strength and Damage of Elementary Flax Fibers Extracted from Tow and Long Line Flax
2009
Flax fibers possess high specific strength and stiffness, and thus are competitive in terms of mechanical properties with traditional reinforcing fibers used in polymer-matrix composite materials. For environmental and economical benefit, it would be preferable to apply nontextile grade fibers in composites provided their mechanical characteristics are acceptable. Elementary fibers have been extracted from long line flax, used as high-quality raw material for textile industry, and flax tow, and their strength distribution and damage level determined. It is shown that the elementary flax fibers coming from short flax fiber are not inferior to those of textile-quality flax in terms of streng…
Mechanical and Thermal Properties of Insulating Sustainable Mortars with Ampelodesmos mauritanicus and Pennisetum setaceum Plants as Aggregates
2021
The use of natural fibers in cement composites is a widening research field as their application can enhance the mechanical and thermal behavior of cement mortars and limit their carbon footprint. In this paper, two different wild grasses, i.e., Ampelodesmos mauritanicus, also called diss, and Pennisetum setaceum, also known as crimson fountaingrass, are used as a source of natural aggregates for cement mortars. The main purpose is to assess the possibility of using the more invasive crimson fountaingrass in place of diss in cement-based vegetable concrete. The two plant fibers have been characterized by means of scanning electron microscopy (SEM), helium picnometry and thermogravimetric an…
Artichoke (Cynara cardunculus L.) fibres as potential reinforcement of composite structures
2011
Abstract The aim of this paper is to examine the use of artichoke fibres as potential reinforcement in polymer composites. The fibres are extracted from the stem of artichoke plant, which grows in Southern Sicily. In order to use these lignocellulosic fibres as potential reinforcement in polymer composites, it is fundamental to investigate their microstructure, chemical composition and mechanical properties. Therefore, the morphology of artichoke fibres was investigated through electron microscopy, the thermal behaviour through thermogravimetric analysis and the real density through a helium pycnometer. The chemical composition of the natural fibres in terms of cellulose, lignin, and ash co…
A Comparative Study of Natural Fiber and Glass Fiber Fabrics Properties with Metal or Oxide Coatings
2015
Rapidly growing global demand for technical textiles industries is stimulated to develop new materials based on hybrid materials (yarns, fabrics) made from natural and glass fibres. The influence of moisture on the electrical properties of metal and metal oxide coated bast (flax, hemp) fibre and glass fibre fabrics are studied by electrical impedance spectroscopy and thermogravimetry. The bast fibre and glass fiber fabrics are characterized with electrical sheet resistance. The method for description of electrical sheet resistance of the metal and metal oxide coated technical textile is discussed. The method can be used by designers to estimate the influence of moisture on technical data of…
Basalt Fiber Hybridization Effects on High-Performance Sisal-Reinforced Biocomposites
2022
The increasing attention given to environmental protection, largely through specific regulations on environmental impact and the recycling of materials, has led to a considerable interest of researchers in biocomposites, materials consisting of bio-based or green polymer matrixes reinforced by natural fibers. Among the various reinforcing natural fibers, sisal fibers are particularly promising for their good mechanical properties, low specific weight and wide availability on the current market. As proven in literature by various authors, the hybridization of biocomposites by synthetical fibers or different natural fibers can lead to an interesting improvement of the mechanical properties or…
Improving the properties of polypropylene–wood flour composites by utilization of maleated adhesion promoters
2007
Polymer composites filled with natural organic fillers have gained a significant interest during the last few years, because of several advantages they can offer compared with properties of inorganic-mineral fillers. However, these composites (based, in most cases, on polyolefins) often show a reduction in some mechanical properties. This is mainly due to the problems regarding dispersion of the polar filler particles in the non-polar polymer matrix and their interfacial adhesion with polymer chains. In this work, polypropylene-wood flour composites were prepared and the effect of the addition of a maleated polypropylene was investigated. The two materials were compounded by an industrial c…
Processing and Mechanical Properties of Natural Fiber Reinforced Thermoplastic Starch Biocomposites
2007
Natural fiber reinforced starch polymers are processed by compression molding. Potato, sweet potato, and corn starch are used as matrices. Three types of natural fibers, namely sisal, jute, and cabuya, are used in concentrations varying from 2.5 to 12.5% w/w in the composites. Different plasticizers are used for the starch polymers, such as water and glycerol. Mechanical properties are assessed by tensile and impact tests. In both cases, improved mechanical properties are obtained at increasing fiber contents. Tensile strength appears to be markedly improved with the addition of 10% by weight of sisal fibers, while the best results for impact strength are obtained for cabuya fibers.