Search results for "Nuclear Energy"
showing 10 items of 614 documents
On the nuclear response of the helium-cooled lithium lead test blanket module in ITER
2005
Abstract The helium-cooled lithium lead (HCLL) concept has been recently selected as one of the two European reference designs foreseen for the breeding blanket of a demonstration fusion reactor. In particular, within the framework of the research and development activities on this blanket line, an HCLL test blanket module (TBM) has to be designed and manufactured to be implemented in ITER. At the Department of Nuclear Engineering (DIN) of the University of Palermo, a research campaign has been carried out to investigate the nuclear response of HCLL-TBM inside ITER by a numerical approach based on the Monte Carlo method. A realistic 3D heterogeneous model of HCLL-TBM has been set-up and ins…
A study of the potential influence of frame coolant distribution on the radiation-induced damage of HCLL-TBM structural material
2008
Abstract Within the European Fusion Technology Programme, the Helium-Cooled Lithium Lead (HCLL) breeding blanket concept is one of the two EU lines to be developed for a Long Term fusion reactor, in particular with the aim of manufacturing a Test Blanket Module (TBM) to be implemented in ITER. The HCLL-TBM is foreseen to be located in an ITER equatorial port, being housed inside a steel-supporting frame, actively cooled by pressurized water. That supporting frame has been designed to house two different TBMs, providing two cavities separated by a dividing Plate 20 cm thick. As the nuclear response of HCLL-TBM might vary accordingly to the supporting frame configuration and composition, at t…
Study of the helium-cooled lithium lead test blanket module nuclear behaviour under irradiation in ITER
2009
Abstract The present paper deals with the detailed investigation of the helium-cooled lithium lead test blanket module (HCLL-TBM) nuclear behaviour under irradiation in ITER, carried out at the Department of Nuclear Engineering of the University of Palermo adopting a numerical approach based on the Monte Carlo method. A realistic 3D heterogeneous model of the HCLL-TBM was set-up and inserted into an ITER 3D semi-heterogeneous model that realistically simulates the reactor lay-out up to the cryostat. A Gaussian-shaped neutron source was adopted for the calculations. The main features of the HCLL-TBM nuclear response were assessed, paying a particular attention to the neutronic and photonic d…
Eurofusion-DEMO Divertor - Cassette Design and Integration
2020
International audience; The Eurofusion-DEMO design will complete the Pre Conceptual Design phase (PCD) with a PCD Gate, named G1, scheduled to take place in Q4 2020 that will focus on assessing the feasibility of the plant and its main components prior to entering into the Conceptual Design phase. In the paper first an overview is given of the Eurofusion-DEMO Divertor Assembly including design and interface description, systems and functional requirements, load specification, system classification, manufacturing procedures and cost estimate. Then critical issues are discussed and potential design solutions are proposed, e.g.:- Neutron material damage limits of the different (structural) mat…
Exergy analysis of electrodialysis for water desalination: Influence of irreversibility sources
2022
The increasing freshwater demand is pushing the development and adoption of desalination technologies. In this framework, electrodialysis has a consolidated role in brackish water desalination, but to make it competitive with other technologies for the desalination of more concentrated solutions (e.g., seawater), the specific energy consumption should be reduced. Exergy analysis provides a useful tool for determining the contribution of each thermodynamic inefficiencies on the process efficiency and the specific energy consumption. In this regard, this paper presents an exergy analysis of the electrodialysis process. A 1-D model is used for evaluating the performance of industrial-scale sys…
Simplified models for the performance evaluation of desiccant wheel dehumidification
2002
In the present communication, simple models have been presented to evaluate the performance of rotary desiccant wheels based on different kind of solid desiccants e.g. silica gel and LiCl. The first part of the paper presents ‘Model 54’ which is developed for silica gel desiccant rotor. The model has been derived from the interpolation of experimental data obtained from the industry and the correlations have been developed for predicting outlet temperature and absolute humidity. The ‘Model 54’ consists of 54 coefficients corresponding to each correlation for outlet absolute humidity and temperature and it is found that the model predicts very well the performance of silica gel desiccant rot…
Update on desiccant wheel model
2004
This short communication presents the update on the desiccant wheel models, developed earlier by the present authors. It is to be mentioned here that the psycrometric model presented earlier (Int. J. Energy Res., 2003; 27:17) is valid only for the desiccant wheel running with identical volume air-flows in supply and regeneration sides. However, when system runs with volume air flow ratio between supply and regeneration side (α), different from 1 (one), the model need further modifications. In the present work, correction factors were developed and incorporated in order to update the earlier model for predicting correctly the temperature and humidity of processed air at the outlet of desicca…
Stochastic dynamics of nonlinear systems with a fractional power-law nonlinear term: The fractional calculus approach
2011
Fractional power-law nonlinear drift arises in many applications of engineering interest, as in structures with nonlinear fluid viscous–elastic dampers. The probabilistic characterization of such structures under external Gaussian white noise excitation is still an open problem. This paper addresses the solution of such a nonlinear system providing the equation governing the evolution of the characteristic function, which involves the Riesz fractional operator. An efficient numerical procedure to handle the problem is also proposed.
Pseudo-force method for a stochastic analysis of nonlinear systems
1996
Nonlinear systems, driven by external white noise input processes and handled by means of pseudo-force theory, are transformed through simple coordinate transformation to quasi-linear systems. By means of Itô stochastic differential calculus for parametric processes, a finite hierarchy for the moment equations of these systems can be exactly obtained. Applications of this procedure to the first-order differential equation with cubic nonlinearity and to the Duffing oscillator show the versatility of the proposed method. The accuracy of the proposed procedure improves by making use of the classical equivalent linearization technique.
Performance of the Fully Digital FPGA-Based Front-End Electronics for the GALILEO Array
2014
In this work we present the architecture and results of a fully digital Front End Electronics (FEE) read out system developed for the GALILEO array. The FEE system, developed in collaboration with the Advanced Gamma Tracking Array (AGATA) collaboration, is composed of three main blocks: preamplifiers, digitizers and preprocessing electronics. The slow control system contains a custom Linux driver, a dynamic library and a server implementing network services. The digital processing of the data from the GALILEO germanium detectors has demonstrated the capability to achieve an energy resolution of 1.53 per mil at an energy of 1.33 MeV.