Search results for "O2"
showing 10 items of 1115 documents
Influence of sol counter-ions on the visible light induced photocatalytic behaviour of TiO2 nanoparticles
2014
Titanium dioxide (TiO2) nanoparticles are attracting increasing interest because of their superior photocatalytic and antibacterial properties. Here, aqueous titanium oxy-hydroxide sols were made, using a green synthesis method, from the controlled hydrolysis/peptisation of titanium isopropoxide. Three different mineral acids were used to peptise the sol (HNO3, HBr and HCl), and provide counter-ions. The influence of nitrate or halide sol counter-ions on size distributions of the starting sols were measured via photon correlation spectroscopy (PCS). Semi-quantitative phase composition analysis (QPA), on the gels thermally treated at 450 and 600 degrees C, was carried out via Rietveld refine…
Anodic Electro Deposition of CeO2 and Co-Doped CeO2 Thin Films
2013
CeO2 and Co containing CeO2 thin films were deposited on indium tin oxide and stainless steel by anodic electrodeposition. Scanning electron microscopy showed that the films are flat and show globular morphology and cracks resulting from volume shrinking. According to XRD and Raman Spectroscopy pure ceria layers are crystalline, while the presence of Co induces the formation of amorphous films. The good adhesion and the compactness allowed the photoelectrochemical characterization of the films. A band gap value of 2.9 eV was estimated for CeO2, while slightly higher values (̃3.0 eV) were estimated for Co containing films. A mechanism for ceria anodic electrodeposition is proposed and discus…
Novel Functionality of Lithium-Impregnated Titania as Nanocatalyst
2019
The present work incorporates the synthesis of a multifunctional catalyst for the transesterification of waste cooking oil (WCO) to biodiesel and recovery of rare earth elements (REEs). For this purpose, TiO2 nanoparticles and TiO2 doped with lithium ions were prepared. The influence of lithium ions on the catalytic performance of TiO2 was attained by impregnation of the different molar ratios of lithium hydroxide to bare TiO2. Then each catalyst was screened for catalytic conversion of WCO to fatty acid methyl ester (FAME) and also for REEs recovery. All synthesized materials were characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), Transmission electron microsc…
The lower rather than higher density charge carrier determines the NH 3 -sensing nature and sensitivity of ambipolar organic semiconductors
2018
International audience; Despite the extensive studies and great application potentials, the sensing nature of ambipolar organic semiconductor gas sensors still remains unclarified, unlike their inorganic counterparts. Herein, different numbers of thiophenoxy groups are introduced into the phthalocyanine periphery of bis(phthalocyaninato) rare earth semiconductors to continuously tune their HOMO and LUMO energies, resulting in the ambipolar M[Pc(SPh)(8)](2) [M = Eu (1), Ho (2)] and p-type M(Pc)[Pc(SPh)(8)] [M = Eu (3), Ho (4)]. An OFET in combination with direct I-V measurements over the devices from the self-assembled nanostructures of 1-4 revealed the original electron and hole densities (…
Nanotribological, nanomechanical and interfacial characterization of atomic layer deposited TiO2 on a silicon substrate
2015
Abstract For every coating it is critical that the coatings are sufficiently durable to withstand practical applications and that the films adhere well enough to the substrate. In this paper the nanotribological, nanomechanical and interfacial properties of 15–100 nm thick atomic layer deposited (ALD) TiO 2 coatings deposited at 110–300 °C were studied using a novel combination of nanoscratch and scanning nanowear testing. Thin film wear increased linearly with increasing scanning nanowear load. The film deposited at 300 °C was up to 58±11 %-points more wear-resistant compared to the films deposited at lower temperatures due to higher hardness and crystallinity of the film. Amorphous/nanocr…
Structural organization of silanol and silicon hydride groups in the amorphous silicon dioxide network
2011
We present a study on the effects of an isothermal annealing treatment on a-SiO 2 having a significant content of silanol hydride groups (Si-H). We examined the properties of the IR absorption bands of silanol (Si-OH) and silicon hydride groups as a function of the duration of the thermal treatment. We showed that the Si-OH and Si-H groups contents decrease in a linearly correlated way. The annealing dynamics suggest that the two species are close to each other in the amorphous network. We showed that the profile of the silanol groups absorption band is the same as that observed in other commercial a-SiO 2 materials, irrespectively of the concomitant presence of nearby Si-H groups, and, mor…
CO2 reduction by C3N4-TiO2 Nafion photocatalytic membrane reactor as a promising environmental pathway to solar fuels
2019
Abstract We investigated CO2 photocatalytic reduction coupling, for the first time in literature, the assets offered by the continuous operating mode using C3N4-TiO2 photo-catalyst embedded in a dense Nafion matrix. The reactor performance was analyzed under UV–vis light in terms of productivity, selectivity and converted carbon. Reaction pressure was specifically investigated for its effect as a “driver” in determining reactor performance, modulating products removal from the reaction volume. In addition, the membrane reactor performance was explored as a function of H2O/CO2 feed molar ratio and contact time. The higher feed pressure (5 bar) led to a lesser MeOH production and a greater am…
Electrochemical Quantification of H2O2 Released by Airway Cells Growing in Different Culture Media
2022
Quantification of oxidative stress is a challenging task that can help in monitoring chronic inflammatory respiratory airway diseases. Different studies can be found in the literature regarding the development of electrochemical sensors for H2O2 in cell culture medium to quantify oxidative stress. However, there are very limited data regarding the impact of the cell culture medium on the electrochemical quantification of H2O2. In this work, we studied the effect of different media (RPMI, MEM, DMEM, Ham’s F12 and BEGM/DMEM) on the electrochemical quantification of H2O2. The used electrode is based on reduced graphene oxide (rGO) and gold nanoparticles (AuNPs) and was obtained by co-electrode…
Ionic Transport through Chemically Functionalized Hydrogen Peroxide-Sensitive Asymmetric Nanopores
2015
We describe the fabrication of a chemical-sensitive nanofluidic device based on asymmetric nanopores whose transport characteristics can be modulated upon exposure to hydrogen peroxide (H2O2). We show experimentally and theoretically that the current-voltage curves provide a suitable method to monitor the H2O2-mediated change in pore surface characteristics from the electronic readouts. We demonstrate also that the single pore characteristics can be scaled to the case of a multipore membrane whose electric outputs can be readily controlled. Because H2O2 is an agent significant for medical diagnostics, the results should be useful for sensing nanofluidic devices.
Soil carbon dynamics as affected by long-term contrasting cropping systems and tillages under semiarid Mediterranean climate
2014
Abstract In a dryland Mediterranean agrosystem (Sicily, Italy) a comparative study was carried out among two crop systems (wheat/wheat and wheat/bean) after 19 years under three most used tillage managements (conventional, dual layer and no-tillage), in order to ascertain the effects of those experimental factors, single and combined, on various soil organic C pools (total and extractable organic C, microbial biomass C, basal respiration). Field CO 2 fluxes from soil, throughout a year, were also determined. Moreover, C input and output were assessed, as well as microbial and metabolic quotients. Tillage management more than cropping system affected the soil organic C stored in the first 15…