Search results for "OPTICS"
showing 10 items of 10033 documents
Spectroscopic analysis of hot-water- and dilute-acid-extracted hardwood and softwood chips
2017
Hot-water and dilute sulfuric acid pretreatments were performed prior to chemical pulping for silver/white birch (Betula pendula/B. pubescens) and Scots pine (Pinus sylvestris) chips to determine if varying pretreatment conditions on the original wood material were detectable via attenuated total reflectance (ATR) infrared spectroscopy. Pretreatment conditions varied with respect to temperature (130 °C and 150 °C) and treatment time (from 30 min to 120 min). The effects of the pretreatments on the composition of wood chips were determined by ATR infrared spectroscopy. The spectral data were compared to those determined by common wood chemistry analyses to evaluate the suitability of ATR spe…
Electrochemical polymerization of ambipolar carbonyl-functionalized indenofluorene with memristive properties
2019
Abstract Carbonyl-functionalized indenofluorene was electropolymerized with a high faradaic efficiency of 85% and the solid state properties of the resulting polymeric thin films were investigated. They displayed modular optical properties depending on their oxidation state. The approach used for inorganic semiconductors was applied to polyindeonofluorene derivative. Mott-Schottky analysis evidenced a switching from p-type to n-type electrical conduction, suggesting an ambipolar behaviour of the polymer. As an application, flexible organic memristors were fabricated and resistive switching properties were observed.
Modelling chemical composition in electric systems - implications to the dynamics of dye-sensitised solar cells
2010
International audience; Classical electromagnetism provides limited means to model electric generators. To extend the classical theory in this respect, additional information on microscopic processes is required. In semiconductor devices and electrochemical generators such information may be obtained by modelling chemical composition. Here we use this approach for the modelling of dye-sensitised solar cells. We simulate the steady-state current-voltage characteristics of such a cell, as well as its transient response. Dynamic simulations show optoelectronic hysteresis in these cells under transient light pulse illumination.
Electron Spin Resonance study of charge trapping in α-ZnMoO4 single crystal scintillator
2015
The origin and properties of electron and hole traps simultaneously appearing in a-ZnMoO4 scintillator after X-ray irradiation at low temperatures (T < 35 K) were studied by Electron Spin Resonance (ESR). ESR spectrum of the electron type trap shows pronounced superhyperfine structure due to the interaction of electron spin with nuclear magnetic moments of 95,97Mo and 67Zn lattice nuclei. Considering the nearly tetragonal symmetry of the center this allows us to identify the electron trap as an electron self-trapped at the (Mo(1)O4) 2 complex. Nearly 60% reduction of the spin–orbit coupling at the Mo(1) ion is caused by the overlap of the Mo and ligand oxygen orbitals indicating an essentia…
Definition of the thermographic regions of interest in cycling by using a factor analysis
2016
Abstract Research in exercise physiology using infrared thermography has increased in the last years. However, the definition of the Regions of Interest (ROIs) varies strongly between studies. Therefore, the aim of this study was to use a factor analysis approach to define highly correlated groups of thermographic ROIs during a cycling test. Factor analyses were performed based on the moment of measurement and on the variation of skin temperatures as a result of the cycling exercise. 19 male participants cycled during 45 min at 50% of their individual peak power output with a cadence of 90 rpm. Infrared thermography was used to measure skin temperatures in sixteen ROIs of the trunk and lowe…
Comments on “Overflow characteristics of streamlined weirs based on model experimentation” by Bagheri S. and Kabiri-Samani A
2021
Abstract In this paper the stage-discharge equation of a streamlined weir is theoretically deduced applying the Π-Theorem of dimensional analysis and the self-similarity theory. The coefficients of the new stage-discharge relationship are estimated using the experimental results by Bagheri and Kabiri-Samani.
Experimental study and numerical simulation of inclined rectangular weirs
2018
Inclined rectangular weirs, also named pivot weirs, are used both to adjust the upstream water level and to increase the flow capacity compared with that of normal rectangular weirs. However, the experimental studies available in the literature present contradictory conclusions for the inclined weir discharge capacity. In this paper, new experimental runs and numerical simulations were performed to investigate the effect of the rectangular weir inclination angle on the stage-discharge formula. The experiments were carried out using inclination angles ranging from 30° to 90°. Buckingham's theorem of dimensional analysis was used to obtain an equation for the flow magnification ratio (the dis…
Flow measurement using circular portable flume
2018
Abstract The circular portable flume is a simple device to measure discharge in circular drainage networks. Since the unit can be easily installed and removed, it is helpful in water distribution measurement and management. First in this paper the available studies are reviewed for highlighting the effect of both the contraction ratio and the flume slope on the stage-discharge relationship. Then the Buckingham's Theorem of the dimensional analysis and the self-similarity theory are used to deduce the stage-discharge curve of the circular flume. The new theoretical stage-discharge equation is calibrated by the literature available experimental data and those obtained in this experimental inv…
Enhancing the sound absorption of small-scale 3D printed acoustic metamaterials based on Helmholtz resonators
2018
Acoustic metamaterials have recently become of interest for their ability to attenuate sound by breaking the mass-density law. In this paper, acoustic metamaterials based on Helmholtz resonators and capable of attenuating sound up to 30 dB are fabricated for sound absorption applications in the small scale. The proposed metamaterials are subwavelength at a factor of $\lambda /12$ with respect to the lateral dimension of the units. The directional response due to the position of the acoustic source on the sound attenuation provided by the metamaterial is investigated by controlling the location of a loudspeaker with a robot arm. To enhance and broaden the absorption bands, structural modific…
Autonomous Bearing Fault Diagnosis Method based on Envelope Spectrum
2017
Abstract Rolling element bearings are one of the fundamental components of a machine, and their failure is the most frequent cause of machine breakdown. Monitoring the bearing condition is vital to preventing unexpected shutdowns and improving their maintenance planning. Specifically, the bearing vibration can be measured and analyzed to diagnose bearing faults. Accurate fault diagnosis can be achieved by analyzing the envelope spectrum of a narrowband filtered vibration signal. The optimal narrow-band is centered at the resonance frequency of the bearing. However, how to determine the optimal narrow-band is a challenge. Several methods aim to identify the optimal narrow-band, but they are …