Search results for "Optical power"

showing 10 items of 33 documents

Integrated InGaAlAs/InP laser-modulator using an identical multiple quantum well active layer

2005

We present experimental results on 40 Gb/s large-signal modulation performance of 1.31 μm monolithic integrated laser-modulator in the InGaAlAs/InP material system, exploiting the gain and absorption properties of an identical multiple quantum well (MQW) active layer. In continuous wave operation, at 15◦ C, the devices achieved threshold currents < 28 mA, fiber coupled optical power levels up to +0.4 dBm. The measured small signal modulation bandwidth was about 32 GHz. An air-cavity based Fabry-Perot interferometer has been realized to characterize the spectral chirp of the integrated structures in the time domain up to 40 Gb/s.

PhysicsDistributed feedback laserbusiness.industryDistributed feedback lasersOptical powerModulatorsActive layerInterferometryOpticsModulationChirpContinuous waveOptoelectronicsbusinessQuantum wellElectroabsorption modulators
researchProduct

In vitro power profiles of multifocal simultaneous vision contact lenses.

2013

Abstract Purpose To evaluate the power profile of multifocal contact lenses (CLs) using a new technology based on quantitative deflectometry. Methods The Nimo TR1504 was used to analyze the power distribution of multifocal CLs. The CLs under study were: Air Optix Aqua Multifocal Low, Medium and High Addition and Focus Progressives. Three lenses of each model were considered. Results All multifocal CLs showed a power profile characterized by a change toward more positive power values when aperture sizes become smaller. The near refractive addition of the lenses under study was +2.61 D, +1.44 D, +1.30 D and +0.30 D for the Focus Progressives, the Air Optix Aqua Multifocal High, Medium Add and…

PhysicsLightbusiness.industryApertureContact LensesOptical powerGeneral MedicinePresbyopiaEquipment Designmedicine.diseaseDistance correctionlaw.inventionPower (physics)Lens (optics)Equipment Failure AnalysisOphthalmologyRefractometryOpticslawmedicineScattering RadiationbusinessFocus (optics)OptometryNominal power (photovoltaic)Contact lensanterior eye : the journal of the British Contact Lens Association
researchProduct

Reconfigurable Shack-Hartmann sensor without moving elements.

2010

We demonstrate wavefront sensing with variable measurement sensitivity and dynamic range by means of a programmable microlens array implemented onto an off-the-shelf twisted nematic liquid crystal display operating as a phase-only spatial light modulator. Electronic control of the optical power of a liquid lens inserted at the aperture stop of a telecentric relay system allows sensing reconfigurability without moving components. Results of laboratory experiments show the ability of the setup to detect both smooth and highly aberrated wavefronts with adequate sensitivity.

PhysicsMicrolensWavefrontLiquid-crystal displaySpatial light modulatorbusiness.industryDynamic rangeAstrophysics::Instrumentation and Methods for AstrophysicsPhysics::OpticsReconfigurabilityOptical powerAtomic and Molecular Physics and Opticslaw.inventionOpticslawImage sensorbusinessOptics letters
researchProduct

Spatiotemporal light-beam compression from nonlinear mode coupling

2017

We experimentally demonstrate simultaneous spatial and temporal compression in the propagation of light pulses in multimode nonlinear optical fibers. We reveal that the spatial beam self-cleaning recently discovered in graded-index multimode fibers is accompanied by significant temporal reshaping and up to four-fold shortening of the injected sub-nanosecond laser pulses. Since the nonlinear coupling among the modes strongly depends on the instantaneous power, we explore the entire range of the nonlinear dynamics with a single optical pulse, where the optical power is continuously varied across the pulse profile.

Physics[PHYS.PHYS.PHYS-OPTICS]Physics [physics]/Physics [physics]/Optics [physics.optics]Multi-mode optical fiberbusiness.industryPhysics::OpticsFOS: Physical sciencesOptical powerLaser pulses; multimode fibers; nonlinear optics; optical fibersLaser01 natural sciencesPulse (physics)law.invention010309 opticsNonlinear systemOpticslaw0103 physical sciencesMode couplingLight beam010306 general physicsbusinessBeam (structure)ComputingMilieux_MISCELLANEOUSPhysics - OpticsOptics (physics.optics)
researchProduct

Preliminary radiation hardness tests of single photon Si detectors

2010

Single photon Si detectors were fabricated by STMicroelectronics and fully characterized in standard operation conditions and after irradiations. Both single cells and arrays, of dimensions ranging from 5x5 up to 64x64, were electrically tested. The devices operation was studied as a function of the temperature from -25 degrees C to 65 degrees C varying the voltage over breakdown, from 5% up to 20% of the breakdown voltage before and after irradiation using both light ions, 10 MeV B ions to doses in the range 3x10(7)-5x10(10) cm(-2), and X-rays irradiations in the range 0.5-20 krad(Si). Optical characterization was performed using a laser at 659 nm and opportunely chosen filters to vary the…

Physicsbusiness.industryOptical powerSilicon Photomultiplier single photon avalanche diode dark count gain light ion irradiation X-rays irradiationSilicon photomultiplierOpticsSingle-photon avalanche diodeRadiation damageOptoelectronicsBreakdown voltageIrradiationbusinessRadiation hardeningDark current
researchProduct

Rateless Codes Performance Tests On Terrestrial FSO Time-Correlated Channel Model

2012

Free Space Optics (FSO) links are affected by several impairments: optical turbulence, scattering, absorption, and pointing. In particular, atmospheric optical turbulence generates optical power fluctuations at the receiver that can degrade communications with fading events, especially, in high data rate links. A way to mitigate FSO link outages can be to add a coding to communications. Nevertheless, in order to study innovative solutions (software or hardware) and to improve the FSO link performance it needs accurate testing models. In this paper we describe an accurate time-correlated channel model able to predict random temporal fluctuations of optical signal irradiance caused by optical…

Physicsbusiness.industrySettore ING-INF/03 - Telecomunicazionicorrelated channelrateless code.Fountain codeOptical powerSettore ING-INF/02 - Campi ElettromagneticiOptical performance monitoringRaptorQ (RQ)Settore ING-INF/01 - ElettronicaSoftwareFree Space Optics (FSO)Luby Tranform (LT)Electronic engineeringFadingbusinessRaptor codeTransform codingAtmospheric opticsComputer Science::Information TheoryCoding (social sciences)Free-space optical communication
researchProduct

Spectral imaging system for scaling the power spectrum of optical waveforms.

2007

We propose and analyze a new photonic system to change the scale of the optical power spectrum of an ultrashort pulse. Our device corresponds to the dual (spectral domain) configuration of a temporal imaging system. It is configured with two time lenses separated by a linear first-order dispersive medium. The specific relation between the chirp rates and the first-order dispersion coefficient is obtained. The main practical constraints are discussed, and the system performance is tested by means of a numerical simulation.

Physicsmedicine.medical_specialtybusiness.industryPhysics::OpticsSpectral densityOptical powerPulse shapingAtomic and Molecular Physics and OpticsSpectral imagingOpticsChirpmedicinePhotonicsbusinessUltrashort pulsePhotonic-crystal fiberOptics letters
researchProduct

Optical Characterization Method for Tilted or Decentered Intraocular Lenses

2016

Purpose To test and validate a method for measuring the optical quality and optical power of monofocal intraocular lenses (IOLs) in the presence of a tilt or a decentration as well as its optical power. Methods The experimental system consists of an artificial eye (wet-cell) and a commercial aberrometer with a Shack-Hartmann sensor. Optical image quality parameters such as point spread function (PSF), modulation transfer function (MTF), and the simulations of the retinal image of an extended object are computed from the in vitro wavefront data of an IOL. Repeatability and reproducibility of the system are tested. Mathematical and ray-tracing simulations are used to ascertain the precision a…

Point spread functionOptics and PhotonicsAccuracy and precisionMaterials sciencePseudophakiaOptical powerArtificial Lens Implant Migration01 natural sciences010309 optics03 medical and health sciences0302 clinical medicineOpticsLens Implantation IntraocularOptical transfer function0103 physical sciencesHumansLenses IntraocularWavefrontReproducibilitybusiness.industryAberrometryReproducibility of ResultsRepeatabilityModels TheoreticalOphthalmologyTilt (optics)030221 ophthalmology & optometrybusinessOptometryOptometry and Vision Science
researchProduct

Exploiting the optical quadratic nonlinearity of zinc-blende semiconductors for guided-wave terahertz generation: A material comparison

2010

We present a detailed analysis and comparison of dielectric waveguides made of CdTe, GaP, GaAs and InP for modal phase matched optical difference frequency generation (DFG) in the terahertz domain. From the form of the DFG equations, we derived the definition of a very general figure of merit (FOM). In turn, this FOM enabled us to compare different configurations, by taking into account linear and nonlinear susceptibility dispersion, terahertz absorption, and a rigorous evaluation of the waveguide modes properties. The most efficient waveguides found with this procedure are predicted to approach the quantum efficiency limit with input optical power in the order of kWs.

Semiconductor waveguidesTerahertz radiationPhase (waves)FOS: Physical sciencesPhysics::OpticsOptical powerFrequency conversionSettore ING-INF/01 - ElettronicaOptical pulse generationSemiconductor materialsDispersion (optics)Optical phase matchingFigure of meritOptical parametric amplifiersElectrical and Electronic EngineeringOptical propagation in nonlinear mediaPhysicsGuided wave testingbusiness.industryOptical frequency conversionCondensed Matter PhysicsAtomic and Molecular Physics and OpticsOptical waveguidesNonlinear systemOptical materialsTerahertz generationOptoelectronicsOptical frequency conversion Optical materials Optical parametric amplifiers Optical phase matching Optical propagation in nonlinear media Optical pulse generation Optical waveguides Frequency conversion Semiconductor materials Semiconductor waveguidesQuantum efficiencybusinessOptics (physics.optics)Physics - OpticsIEEE Journal of Quantum Electronics
researchProduct

Measurements of Silicon Photomultipliers Responsivity in Continuous Wave Regime

2013

We report on the electrical and optical characterization, in continuous wave regime, of a novel class of silicon photomultipliers fabricated in standard planar technology on a silicon p-type substrate. Responsivity measurements, performed with an incident optical power down to tenths of picowatts, at different reverse bias voltages and on a broad (340–820 nm) spectrum, will be shown and discussed. The device temperature was monitored, allowing us to give a physical interpretation of the measurements. The obtained results demonstrate that such novel silicon photomultipliers are suitable as sensitive power meters for low photon fluxes.

Silicon photonicsMaterials scienceSiliconPhysics::Instrumentation and Detectorsbusiness.industryHybrid silicon laserchemistry.chemical_elementSettore ING-INF/02 - Campi ElettromagneticiOptical powerSubstrate (electronics)Settore ING-INF/01 - ElettronicaElectronic Optical and Magnetic MaterialsResponsivityOpticsSilicon photomultiplierchemistryOptoelectronicsContinuous waveAvalanche photodiode (APD) photodetector responsivity silicon photomultiplier (SiPM) single-photon avalanche diode (SPAD)Electrical and Electronic EngineeringbusinessIEEE Transactions on Electron Devices
researchProduct