Search results for "Optoelectronics"
showing 10 items of 2306 documents
Visible Photoluminescence of Variable-Length Zinc Oxide Nanorods Embedded in Porous Anodic Alumina Template for Biosensor Applications
2021
Zinc oxide (ZnO) and porous anodic aluminum oxide (PAAO) are technologically important materials, rich with features that are of interest in optical applications, for example, in light-emitting and sensing devices. Here, we present synthesis method of aligned ZnO nanorods (NR) with 40 nm diameter and variable length in 150 to 500 nm range obtained by atomic layer deposition (ALD) of ZnO in pores of continuously variable thickness PAAO. The relative intensity of yellow (1.99 eV), green (2.35 eV), and blue (2.82 eV) photoluminescence (PL) components originating from the different types of defects, varied with non-monotonic dependency on the composite film thickness with a Fabry–Pérot like mod…
Acoustically driven photon antibunching in nanowires.
2011
The oscillating piezoelectric field of a surface acoustic wave (SAW) is employed to transport photoexcited carriers, as well as to spatially control exciton recombination in GaAs-based nanowires (NWs) on a subns time scale. The experiments are carried out in core-shell NWs transferred to a SAW delay line on a LiNbO(3) crystal. Carriers generated in the NW by a focused laser spot are acoustically transferred to a second location, leading to the remote emission of subns light pulses synchronized with the SAW phase. The dynamics of the carrier transport, investigated using spatially and time-resolved photoluminescence, is well-reproduced by computer simulations. The high-frequency contactless …
Luminescence study of defects in synthetic as-grown and HPHT diamonds compared to natural diamonds
2005
The optically active defects in as-grown, high-pressure high-temperature-treated (HPHT), boron-doped, and synthetic diamonds (SD) grown with a nitrogen-getter, as well as of natural diamonds (ND), were characterized by absorption and luminescence spectroscopies using different excitation sources. The laser-excited photoluminescence (PL) spectra of SDs show numerous sharp lines characteristic for nickel-related centers, whereas NDs yield mainly broad PL bands. The emission from the nickel-related defects in NIR range increases and the maxima of the bands shift to lower energies with increasing temperature. Under UV and electron beam excitation, the yellow synthetic diamonds display green lum…
Responsivity measurements of N-on-P and P-on-N silicon photomultipliers in the continuous wave regime
2013
We report the electrical and optical comparison, in continuous wave regime, of two novel classes of silicon photomultipliers (SiPMs) fabricated in planar technology on silicon P-type and N-type substrate respectively. Responsivity measurements have been performed with an incident optical power from tenths of picowatts to hundreds of nanowatts and on a broad spectrum, ranging from ultraviolet to near infrared (340-820 nm). For both classes of investigated SiPMs, responsivity shows flat response versus the optical incident power, when a preset overvoltage and wavelength is applied . More in detail, this linear behavior extends up to about 10 nW for lower overvoltages, while a shrink is observ…
Operation of silicon photomultipliers as photosensors of liquid xenon detectors
2016
Silicon Photomultipliers as photosensors for liquid xenon detectors are an attractive alternative to photomultiplier tubes: liquid xenon detectors employed in low background experiments or compact Compton cameras can take advantage of the small sensor mass and dimensions, the larger light collection coming from a more packed tiling of the readout plane, and possibly a smaller cost per area. We investigate the operation in liquid xenon of samples developed by Ketek GmbH. To provide sensitivity to the liquid xenon scintillation light wavelength, 178 nm, the inactive entrance layer of the device has been thinned. The operation of such devices at temperatures as low as −100°C has been verified,…
Wearable, Fiber-less, Multi-Channel System for Continuous Wave Functional Near Infrared Spectroscopy Based on Silicon Photomultipliers Detectors and …
2019
Development and in-vivo validation of a Continuous Wave (CW) functional Near Infrared Spectroscopy (fNIRS) system is presented. The system is wearable, fiber-less, multi-channel (16×16, 256 channels) and expandable and it relies on silicon photomultipliers (SiPMs) for light detection. SiPMs are inexpensive, low voltage and resilient semiconductor light detectors, whose performances are analogous to photomultiplier tubes (PMTs). The advantage of SiPMs with respect to PMTs is that they allow direct contact with the scalp and avoidance of optical fibers. In fact, the coupling of SiPMs and light emitting diodes (LEDs) allows the transfer of the analog signals to and from the scalp through thin …
Single photon emission from impurity centers in AlGaAs epilayers on Ge and Si substrates
2012
We show that the epitaxial growth of thin layers of AlGaAs on Ge and Si substrates allows to obtain single photon sources by exploiting the sparse and unintentional contamination with acceptors of the AlGaAs. Very bright and sharp single photoluminescence lines are observed in confocal microscopy. These lines behave very much as single excitons in quantum dots, but their implementation is by far much easier, since it does not require 3D nucleation. The photon antibunching is demonstrated by time resolved Hanbury Brown and Twiss measurements.
Dibenzo[hi,st]ovalene as Highly Luminescent Nanographene: Efficient Synthesis via Photochemical Cyclodehydroiodination, Optoelectronic Properties, an…
2019
Dibenzo[hi,st]ovalene (DBOV), as a new nanographene, has demonstrated promising optical properties, such as red emission with a high fluorescence quantum yield of 79% and stimulated emission, as well as high thermal stability and photostability, which indicated its promise as a light-emitting and optical gain material. However, the previous synthetic routes required at least 12 steps. This obstructed access to different derivatives, e.g., to obtain crystals suitable for X-ray diffraction analysis and to tune the optoelectronic properties. Here, we report an efficient synthetic pathway to DBOV based on a sequential iodination-benzannulation of bi(naphthylphenyl)diyne, followed by photochemic…
Accelerated stabilization of coherent photon states
2018
| openaire: EC/H2020/681311/EU//QUESS Control and utilization of coherent states of microwave photons is a ubiquitous requirement for the present and near-future implementations of solid-state quantum computers. The rate at which the photon state responds to external driving is limited by the relaxation rate of the storage resonator, which poses a trade-off between fast control and long storage time. Here, we present a control scheme that is designed to drive an unknown photon state to a desired coherent state much faster than the resonator decay rate. Our method utilizes a tunable environment which acts on an ancillary qubit coupled to the resonator. By periodically resetting the qubit and…
Two-Color Single-Photon Emission from In As Quantum Dots: Toward Logic Information Management Using Quantum Light
2014
In this work, we propose the use of the Hanbury-Brown and Twiss interferometric technique and a switchable two-color excitation method for evaluating the exciton and noncorrelated electron-hole dynamics associated with single photon emission from indium arsenide (InAs) self-assembled quantum dots (QDs). Using a microstate master equation model we demonstrate that our single QDs are described by nonlinear exciton dynamics. The simultaneous detection of two-color, single photon emission from InAs QDs using these nonlinear dynamics was used to design a NOT AND logic transference function. This computational functionality combines the advantages of working with light/photons input/output device…