Search results for "PULP"

Design and experimental validation of a magnetic device for stem cell culture.

2020

Cell culture of bone and tendon tissues requires mechanical stimulation of the cells in order to mimic their physiological state. In the present work, a device has been conceived and developed to generate a controlled magnetic field with a homogeneous gradient in the working space. The design requirement was to maximize the magnetic flux gradient, assuring a minimum magnetizing value in a 15 mm × 15 mm working area, which highly increases the normal operating range of this sort of devices. The objective is to use the machine for two types of biological tests: magnetic irradiation of biological samples and force generation on paramagnetic particles embedded in scaffolds for cell culture. The…

Novel biocatalysts for glycerol conversion into 2,3-butanediol

2016

Abstract Bioconversion of biodiesel-derived waste glycerol into high-value products is proposed as a solution to improve economic viability of biorefineries. Several microorganisms are able to metabolize glycerol into 2,3-butanediol (2,3-BD), a promising bulk chemical with wide applications: solvent, fuel additive, and feedstock for synthetic rubber production, among them. In the present work, a wide screening of microorganisms present both into the waste water treatment system in a biodiesel industry and in culture collections was carried out in order to evaluate their potential as new 2,3-BD producer biocatalysts. Two microorganisms for 2,3-BD production from glycerol as sole carbon sourc…

Effect of fruit-set time on the quality performance of Anona cherimola Mill. fruit in south italy

2019

Abstract The aim of this work was to analyse the differences between fruits obtained by different dates of fruit set and identify the proper fruit-set time that allows to obtain the optimum fruit quality in Annona cherimola cv Fino de Jete, planted in Southern Italy. Six fruit-set dates were selected from the first week of June to the second week of July. Fruits were sampled from October to November, when 1500 Growing Degree Days (DD) were accumulated; The DD were calculated using a base temperature of 12 °C. Fruit fresh weight (FW) and skin colour were measured. These parameters were measured also after storage, and in addition, the following parameters were measured: fruit shape (FS), pul…

Glycolipid Biosurfactant Production from Waste Cooking Oils by Yeast: Review of Substrates, Producers and Products

2021

Biosurfactants are a microbially synthesized alternative to synthetic surfactants, one of the most important bulk chemicals. Some yeast species are proven to be exceptional biosurfactant producers, while others are emerging producers. A set of factors affects the type, amount, and properties of the biosurfactant produced, as well as the environmental impact and costs of biosurfactant’s production. Exploring waste cooking oil as a substrate for biosurfactants’ production serves as an effective cost-cutting strategy, yet it has some limitations. This review explores the existing knowledge on utilizing waste cooking oil as a feedstock to produce glycolipid biosurfactants by yeast. The review f…

Boosting Biomass Quantity and Quality by Improved Mixotrophic Culture of the Diatom Phaeodactylum tricornutum

2021

Diatoms are photoautotrophic unicellular algae and are among the most abundant, adaptable, and diverse marine phytoplankton. They are extremely interesting not only for their ecological role but also as potential feedstocks for sustainable biofuels and high-value commodities such as omega fatty acids, because of their capacity to accumulate lipids. However, the cultivation of microalgae on an industrial scale requires higher cell densities and lipid accumulation than those found in nature to make the process economically viable. One of the known ways to induce lipid accumulation in Phaeodactylum tricornutum is nitrogen deprivation, which comes at the expense of growth inhibition and lower c…

Application of Fermentation to Recover High‐Added Value Compounds from Food By‐Products

2021

Granulation and microbial community dynamics in the chitosan-supplemented anaerobic treatment of wastewater polluted with organic solvents.

2018

Abstract The effect of chitosan on the development of granular sludge in upflow anaerobic sludge blanket reactors (UASB) when treating wastewater polluted with the organic solvents ethanol, ethyl acetate, and 1-ethoxy-2-propanol was evaluated. Three UASB reactors were operated for 219 days at ambient temperature with an organic loading rate (OLR) of between 0.3 kg COD m −3 d −1 and 20 kg COD m −3 d −1 . One reactor was operated without the addition of chitosan, while the other two were operated with the addition of chitosan doses of 2.4 mg gVSS −1 two times. The three reactors were all able to treat the OLR tested with COD removal efficiencies greater than 90%. However, the time required to…

Effect of pulp cell number and assimilate availability on dry matter accumulation rate in a banana fruit (Musa sp. AAA group 'Grande Naine' (Cavendis…

2001

Fruit position on the bunch (inflorescence) is an important part of variability in banana fruit weight at harvest, as fruits at the bottom of the bunch (distal fruits) are approx. 40% smaller than those at the top (proximal fruits). In this study, the respective roles of cell number and cell filling rate in the development of pulp dry weight are estimated. To this end, the source/sink ratio in the plant was altered at different stages of fruit development. Leaf shading (reducing resource availability), bunch bagging (increasing sink activity by increasing fruit temperature), and bunch trimming (decreasing sink size by fruit pruning), applied once cell division had finished, showed that the …

Removal of acetone from air emissions by biotrickling filters: providing solutions from laboratory to full-scale

2018

A full-scale biotrickling filter (BTF) treating acetone air emissions of wood-coating activities showed difficulties to achieve outlet concentrations lower than 125 mg C m-3, especially for high inlet concentrations and oscillating emissions. To solve this problem, a laboratory investigation on acetone removal was carried out simulating typical industrial conditions: discontinuous and variable inlet concentrations and intermittent spraying. The results were evaluated in terms of removal efficiency and outlet gas emission pattern. Industrial emissions and operational protocols were simulated: inlet load up to 70 g C m-3 h-1 during 2 cycles of 4 h per day and intermittent trickling of 15 min …

Anaerobic membrane bioreactor (AnMBR) scale-up from laboratory to pilot-scale for microalgae and primary sludge co-digestion: Biological and filtrati…

2020

This research work proposes the scale-up evaluation in terms of biological and filtration performance from laboratory to pilot-scale of an anaerobic membrane bioreactor (AnMBR) co-digesting raw microalgae and primary sludge. Best operating conditions for this scale-up were energetically and economically assessed based on laboratory results. Economic balance showed 3% higher annual costs when operating a reactor at 100 d solids retention time (SRT) compared to 70 d SRT. Energetic balance showed a 5.5-fold increase in heat demand working at thermophilic temperature comparing to mesophilic. The AnMBR operating conditions were set at 70 d SRT and 35 °C. The pilot-scale and lab-scale co-digester…