Search results for "Partial Pressure"
showing 10 items of 145 documents
Pulmonary effects of expiratory-assisted small-lumen ventilation during upper airway obstruction in pigs
2015
Summary Novel devices for small-lumen ventilation may enable effective inspiration and expiratory ventilation assistance despite airway obstruction. In this study, we investigated a porcine model of complete upper airway obstruction. After ethical approval, we randomly assigned 13 anaesthetised pigs either to small-lumen ventilation following airway obstruction (n = 8) for 30 min, or to volume-controlled ventilation (sham setting, n = 5). Small-lumen ventilation enabled adequate gas exchange over 30 min. One animal died as a result of a tension pneumothorax in this setting. Redistribution of ventilation from dorsal to central compartments and significant impairment of the distribution of ve…
The Role of Tumor Volume in ‘Reoxygenation’ upon Cyclophosphamide Treatment
1995
The effect of cyclophosphamide (CP) injection (60 mg/kg i.p., single dose) on volume growth and tissue oxygenation (pO2 distribution) was investigated in rat DS-sarcomas. CP was administered 4 days after subcutaneous (s.c.) tumor implantation (volume approximately 0.35 ml). Polarographic pO2 measurements were performed in the subcutis at the hind foot dorsum and in tumors 72 h after CP administration. The oxygenation status of these tissues was compared with that of saline-treated controls. CP-injection caused a mean growth delay of 11 days in DS-sarcomas and had no impact on the oxygenation status of the subcutis. In contrast, in s.c. growing DS-sarcomas the pO2 distribution improved signi…
Coagulation bath composition and desiccation environment as tuning parameters to prepare skinless membranes via diffusion induced phase separation
2015
Diffusion Induced Phase Separation (DIPS) is a currently used technique to produce porous membranes for a large variety of applications. A strong limitation is represented by the occurrence of a dense skin, which is formed during the process, highly reducing the membrane permeability. To overcome this issue, two modifications of the standard DIPS protocol were investigated: the use of coagulation baths composed by a solvent/nonsolvent mixture and the desiccation in a controlled environment, by modulating the partial pressure of nonsolvent vapor. An appropriate choice of coagulation bath composition, together with an appropriate desiccation protocol (i.e., the use of a nonsolvent vapor), wil…
Biological oxygen apparent transmissibility of hydrogel contact lenses with and without organosilicon moieties.
2003
The instrument oxygen transmissibility (IOT) of organosilicon hydrogels, measured by electrochemical procedures, is 5-10 times larger than that of conventional hydrogels. A method is described that allows the estimation of the oxygen tension at the lens-cornea interface for closed- and open-eyelids situations by combining the IOT of the hydrogels and corneal parameters such as corneal thickness, corneal permeability and oxygen flux across the cornea. From these results the biological oxygen apparent transmissibility (BOAT) is obtained, an important parameter which an multiplication with the pressure of oxygen on the external part of the lens gives the oxygen flux onto the cornea. Contact le…
Mechanical activation conditions of the Fe2O3 and V2O3 mixture powders in order to obtain a nanometric vanadium spinel ferrite
1999
Abstract Co-milling of iron and vanadium oxides allows to obtain an intimate oxides mixture at a nanoscale, similar to a coprecipitate elaborated by soft chemistry. Reduction of such a mixture in the same temperature and oxygen partial pressure conditions (500°C and 10−25 Pa) as the soft chemistry products leads to a nanometric vanadium ferrite with the only spinel phase. The characterization of the powders is achieved by X-ray diffraction (XRD), scanning electron microscopy, infrared (IR) spectrometry, thermogravimetry and calorimetry. Homogeneity of grain size and chemical composition is reached if the initial oxides have similar grain size.
Structure and chemical bonds in reactively sputtered black Ti–C–N–O thin films
2011
The evolution of the nanoscale structure and the chemical bonds formed in Ti–C–N–O films grown by reactive sputtering were studied as a function of the composition of the reactive atmosphere by increasing the partial pressure of an O2+N2 gas mixture from 0 up to 0.4 Pa, while that of acetylene (carbon source) was constant. The amorphisation of the films observed by transmission electron microscopy was confirmed by micro- Raman spectroscopy, but it was not the only effect associated to the increase of the O2+N2 partial pressure. The chemical environment of titanium and carbon, analysed by X-ray photoemission spectroscopy, also changes due to the higher affinity of Ti towards oxygen and nitro…
High power impulse magnetron sputtering of Zn/Al target in an Ar and Ar/O2 atmosphere: The study of sputtering process and AZO films
2019
Financial support provided by Scientific Research Project for Students and Young Researchers Nr. SJZ/2017/4 realised at the Institute of Solid State Physics, University of Latvia is greatly acknowledged.
A dilatometric study of the Lao.8Sr0.2MnO3 sintering behaviour
1997
Abstract The sintering behaviour of La0.8Sr0.2MnO3 has been studied by dilatometry between 1100 and 1800 K in various oxygen potentials [pure oxygen, air and nitrogen (PO2 = 1 × 10−5 bar)]. The starting material was prepared by spray pyrolysis of aqueous solutions of nitrates. Two classical sinter stages, neck formation and grain growth respectively, were evidenced from dilatometric curves and this result was corroborated by scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses. The rate of densification was found to be directly dependent on oxygen partial pressure, the best conditions being in nitrogen. These results are discussed in terms of vacancy diffusion and oxygen …
Activity monitoring of a gaseous tritium source by beta induced X-ray spectrometry
2013
Abstract For monitoring and control of gaseous tritium sources in fuel circulation systems of fusion reactors beta induced X-ray spectrometry (BIXS) seems to be an applicable method. The characteristics of a BIXS monitoring setup built at TLK were examined. A low-noise silicon drift detector (SDD) was used together with two thin beryllium windows evaporated with gold films of 100 nm for efficient X-ray production. The measured X-ray intensity was proportional to the tritium partial pressure and the average detection efficiency was evaluated as 32.6 × 10−8 cps/Bq. A tritium memory effect was revealed. From the results it was concluded that such a monitoring system would be a useful complemen…
Hyperpolarized helium-3 gas magnetic resonance imaging of the lung.
2003
3He magnetic resonance imaging (MRI) is capable of producing new and regional information on normal and abnormal lung ventilation. The basis of 3He MRI involves "optical pumping" to hyperpolarize the 3He nuclei by photon angular momentum transfer. The hyperpolarized gas is administered via inhalation. 3He is an inert, nontoxic noble gas and absorbed in less than 0.1%. Imaging consists of a four-step protocol. 1) Gas density 3He MRI with high spatial resolution displays the distribution of a 3He bolus in a 10-second breath-hold. An almost homogeneous distribution is regarded as normal. Patients with lung diseases show multiple ventilation defects. 3He MRI has been shown to be more sensitive …