Search results for "Pellet"
showing 10 items of 129 documents
Conceptual study of a heavy-ion-ERDA spectrometer for energies below 6 MeV
2017
Abstract Elastic recoil detection analysis (ERDA) is a well established technique and it offers unique capabilities in thin film analysis. Simultaneous detection and depth profiling of all elements, including hydrogen, is possible only with time-of-flight ERDA. Bragg ionization chambers or Δ E - E detectors can also be used to identify the recoiling element if sufficiently high energies are used. The chief limitations of time-of-flight ERDA are the beam induced sample damage and the requirement of a relatively large accelerator. In this paper we propose a detector setup, which could be used with 3 MeV to 6 MeV medium heavy beams from either a single ended accelerator (40Ar) or from a tandem…
The owl that never left! Taphonomy of Earlier Stone Age small mammal assemblages from Wonderwerk Cave (South Africa)
2022
Wonderwerk Cave, in South Africa, is an exceptional site that has yielded a large collection of small mammal fossils in a stratigraphic sequence reaching back ca. 2 million years. Taphonomic studies undertaken to date, show that Tytonidae (likely Tyto alba) was the dominant predator during the Earlier Stone Age. They produced masses of pellets that formed a dense carpet-like surface that covered the cave floor at intervals throughout the sequence. This paper compares the taphonomic signatures of five different Earlier Stone Age small mammal assemblages from Wonderwerk Cave, including assemblages not studied before, as well as a modern pellet assemblage collected from inside the cave. These …
Green methodology for quality control of elemental content of infant milk powder
2019
Abstract A green methodology for the direct determination of elemental content in infant milk powder samples from 0 to 3 years was developed. A portable energy dispersive X-ray fluorescence (ED-XRF) tool has been used as a direct method for the quantification of five essential elements (Ca, K, Fe, Cu and Zn). For analysis pellets from 0.8 g of each sample weight were made and analyzed. Due to the high dependence of the ED-XRF signal with the sample matrix, external calibrations using cocoa powder diluted with glucose were performed. Infant milk samples were diluted with lactose and the signals were interpolated in the external calibrations. Concentrations obtained by ED-XRF were compared wi…
Applicability of a single‐use bioreactor compared to a glass bioreactor for the fermentation of filamentous fungi and evaluation of the reproducibili…
2021
Abstract The implementation of single‐use technologies offers several major advantages, e.g. prevention of cross‐contamination, especially when spore‐forming microorganisms are present. This study investigated the application of a single‐use bioreactor in batch fermentation of filamentous fungus Penicillium sp. (IBWF 040‐09) from the Institute of Biotechnology and Drug Research (IBWF), which is capable of intracellular production of a protease inhibitor against parasitic proteases as a secondary metabolite. Several modifications to the SU bioreactor were suggested in this study to allow the fermentation in which the fungus forms pellets. Simultaneously, fermentations in conventional glass b…
Analysis of optimal temperature, pressure and binder quantity for the production of biocarbon pellet to be used as a substitute for coke
2019
In order to contribute to the decarbonization of the economy, efficient alternatives to coal and coke should be found not only in the power sector but also in the industrial sectors (like steel, silicon and manganese production) in which coal and coke are used as a reductant and for steel production also as a fuel. To this aim many research works have been focused on the development of a coke substitute based on woody biomass and known as “biocarbon”. There are still barriers to overcome, among them: the biocarbon low density, poor mechanical strength and high reactivity. In this paper a new biocarbon production methodology is proposed, based on: pyrolysis at 600 °C, densification (using py…
Effect of torrefaction on properties of pellets produced from woody biomass
2020
Torrefaction has been recognized as a promising strategy to improve handling and storage properties of wood-based pellets, thus producing a uniform-quality commodity with high energy density and hydrophobicity. In this work, pellets produced from spruce stem wood, bark, and forest residues were torrefied in a bench-scale tubular reactor at 225 and 275 °C with two residence times (30 and 60 min). The effects of torrefaction on general properties, grindability, mechanical properties, hydrophobicity, and microstructure of the studied pellets were investigated. The increase of torrefaction severity reduced mass yields, but the heating values and the fixed carbon content of the torrefied pellets…
II) Wood pellets for home heating can be considered environmentally friendly fuels? Heavy metals determination by inductively coupled plasma-optical …
2016
Abstract The aim of the present study was to determine the concentrations of twelve potentially hazardous elements in wood pellet ashes obtained by the combustion of 13 pellet brands for sale in Italy, the impact of adding the ashes to soils and health risk of operator due to dust exposure. Samples were analysed by Inductively Coupled Plasma Optical Emission Spectrometry. The concentrations of heavy metals in ashes from stoves ranged from 0.41 to 7.2 mg kg − 1 for As, from 1.3 to 12 mg kg − 1 for Sb, from 1.8 to 12 mg kg − 1 for Zn, from 0.23 to 0.8 mg kg − 1 for Pb, from 0.18 to 2.8 mg kg − 1 for Ni, from 0.09 to 1.0 mg kg − 1 for Cd, from 0.46 to 3.4 mg kg − 1 for Cr, from 0.94 to 2.7 mg …
Characterization of renewable reductants and charcoal-based pellets for the use in ferroalloy industries
2018
This study investigates the effect of high-temperature pyrolysis and post-treatment processes on spruce and oak charcoal yields and CO2 reactivity in a slow pyrolysis reactor. Post-treatment processes such as co-pyrolysis of biomass and recirculated tar mixture with that to the distillation of the charcoal-tar blend gave similar increase in charcoal yields. From a technological standpoint, co-pyrolysis of charcoal and tar mixture decreased the CO2 reactivity of the charcoal approaching that of fossil-based coke. This emphasize the importance of tar addition and high temperature treatment on charcoal properties. Moreover, the findings of this work show the potential use of the tar organic fr…
Wood pellets for home heating can be considered environmentally friendly fuels? Polycyclic aromatic hydrocarbons (PAHs) in their ashes
2016
This paper reports the results of the first quantitative investigations of PAHs in wood pellet ashes. Investigations were carried out into the fifteen PAHs identified by the US-Environment Protection Agency (US-EPA) as requiring priority monitoring; other non-US-EPA listed PAHs and perylene were also investigated. The total concentrations for the 17 investigated compounds, expressed as the sum of the concentrations (∑PAHs), in the ashes produced by the wood pellet combustion, ranged from 0.064mg kg-1 to 0.90mg kg-1 of dry weight with a means of 0.31mg kg-1. The lowest concentrations (<0.1mg kg-1) were measured in the conifer ash samples. Concentrations of PAHs found in this paper will al…
The effect of incorporating different concentrations of chlorhexidine digluconate on the degree of conversion of an experimental adhesive resin
2018
Background The aim of this study was to evaluate the effect of chlorhexidine digluconate incorporation on the degree of conversion of an experimental adhesive resin. Material and Methods The experimental resin was prepared from 70 wt% bisphenol A glycerolate dimethacrylate, 30 wt% hydroxyethyl methacrylate, silanized SiO2 nanofillers, 0.5% of camphorquinone and ethyl 4-dimethylaminebenzoate (binary photo-initiator system). Five chlorhexidine digluconate concentrations (0, 0.5, 1, 2 and 4 wt%) were then incorporated into the experimental resin. Thirty Potassium Bromide pellets were prepared then divided into six groups (n=5/group), repre¬senting the tested adhesive resins (Single Bond 2, 0, …