Search results for "Photocurrent"
showing 10 items of 140 documents
Light induced electropolymerization of poly(3,4-ethylenedioxythiophene) on niobium oxide
2010
Abstract The photoelectrochemical polymerization of poly(3,4-ethylenedioxythiophene), PEDOT, was successfully realized on anodic film grown to 50 V on magnetron sputtered niobium. Photocurrent Spectroscopy was employed to study the optical properties of Nb/Nb 2 O 5 /PEDOT/electrolyte interface in a large range of potential, and to get an estimate of the band gap and flat band potential of both the oxide and the polymer. Scanning Electron Microscopy was used to study the morphology of PEDOT. Both the optical and morphological features of the photoelectrochemically grown polymer were compared with those showed by PEDOT electropolymerized on gold conducting substrate.
Ultra-nonlocality in density functional theory for photo-emission spectroscopy.
2014
We derive an exact expression for the photo-current of photo-emission spectroscopy using time-dependent current density functional theory (TDCDFT). This expression is given as an integral over the Kohn-Sham spectral function renormalized by effective potentials that depend on the exchange-correlation kernel of current density functional theory. We analyze in detail the physical content of this expression by making a connection between the density-functional expression and the diagrammatic expansion of the photo-current within many-body perturbation theory. We further demonstrate that the density functional expression does not provide us with information on the kinetic energy distribution of…
Study of the annealing conditions and photoelectrochemical characterization of a new iron oxide bi-layered nanostructure for water splitting
2016
Iron oxide nanostructures have emerged as promising materials for being used as photocatalysts for hydrogen production due to their advantageous properties. However, their low carrier mobility and short hole diffusion length limit their efficiency in water splitting. To overcome these drawbacks, in the present study, we synthetized a new hematite (alpha-Fe2O3) bi-layered nanostructure consisting of a top nanosphere layer and a nanotubular underneath one by electrochemical anodization. Annealing parameters such as temperature, heating rate and atmosphere were studied in detail in order to determine the optimum annealing conditions for the synthetized nanostructure. The obtained new bi-layere…
Synergistic Use of Electrochemical Impedance Spectroscopy and Photoelectrochemical Measurements for Studying Solid State Properties of Anodic HfO2
2017
Within the past years, intense research has been carried out on HfO2 as high k material, promising candidate to replace SiO2 as gate dielectric in CMOS based devices (1), and as metal oxide for resistive random access memory (ReRAM) (2). For both technological applications compact, uniform and flat oxides are necessary, and a detailed understanding of their physical properties as a function of the fabrication conditions is strongly. Hafnia performance can be significantly influenced by carrier trapping taking place at pre-existing precursors states (induced by oxygen vacancies, interstitial ions, impurities acting as dopants), or by self-trapping in a perfect lattice, where the potential we…
Fabrication and Photoelectrochemical Behavior of Ordered CIGS Nanowire Arrays for Application in Solar Cells
2010
In this work, we report some preliminary results concerning the fabrication of quaternary copper, indium, gallium, and selenium CIGS nanowires that were grown inside the channels of an anodic alumina membrane by one-step potentiostatic deposition at different applied potentials and room temperature. A tunable nanowire composition was achieved through a manipulation of the applied potential and electrolyte composition. X-ray diffraction analysis showed that nanowires, whose chemical composition was determined by energy-dispersive spectroscopy analysis, were amorphous. A composition of Cu0.203In0.153Ga0.131Se0.513, very close to the stoichiometric value, was obtained. These nanostructures wer…
Optical Optimization of the TiO2 Mesoporous Layer in Perovskite Solar Cells by the Addition of SiO2 Nanoparticles
2018
In this work, SiO2 nanoparticles (NPs) were integrated into the mesoporous TiO2 layer of a perovskite solar cell to investigate their effect on cell performance. Different concentrations of SiO2/ethanol have been combined in TiO2/ethanol to prepare pastes for the fabrication of the mesoporous layer with which perovskite solar cells have been fabricated. Addition of SiO2 NPs of 50 and 100 nm sizes produces an enhancement of cell performance mainly because of an improvement of the photocurrent. This increment is in good agreement with the theoretical predictions based on light scattering induced by dielectric SiO2 NPs. The samples using modified scaffolds with NPs also present a significant l…
Photoelectrochemical Characterization of Ta/Ta2O5/Polypyrrole Heterojunctions
2009
A photodeposition of polypyrrole on anodic tantalum oxide thin films was performed in both organic and aqueous media. Pyrrole was photo-oxidised on insulating tantalum oxide by irradiating the electrode with light of suitable energy. Tantalum/ tantalum oxide/ polypyrrole heterojunctions were then characterized by means of photocurrent spectroscopy. The comparison between the photoelectrochemical response of the heterojunctions fabricated in organic and aqueous media, shows that the solvent used for the photodeposition of polypyrrole influences the location of the inversion potential. This result can be attributed to the different structure of polypyrrole films, which strongly depends on the…
ChemInform Abstract: Photoelectrochemical Study of Electrochemically Formed Semiconducting Yttrium Hydride (YH3-x).
2010
Abstract The first photoelectrochemical study of semiconducting YH 3− x films formed by etching bulk Y metal in 0.5 M H 2 SO 4 solution is reported. The formation of semiconducting hydride having an indirect optical band gap, E g opt , of about 2.35 eV is confirmed by in situ photocurrent spectroscopy. The photoelectrochemical behaviour of such a phase was investigated both in alkaline and in acidic solutions. The flat band potential was estimated to be U fb =−1.25 V/NHE, independent of pH.
High-speed solid state fluorination of Nb2O5 yields NbO2F and Nb3O7F with photocatalytic activity for oxygen evolution from water
2021
Solid state reactions are slow because the diffusion of atoms or ions through the reactant, intermediate and crystalline product phases is the rate-limiting step. This requires days or even weeks of high temperature treatment, and consumption of large amounts of energy. We employed spark-plasma sintering, an engineering technique that is used for high-speed consolidation of powders with a pulsed electric current passing through the sample to carry out the fluorination of niobium oxide in minute intervals. The approach saves time and large amounts of waste energy. Moreover, it allows the preparation of fluorinated niobium oxides on a gram scale using poly(tetrafluoroethylene) (®Teflon) scrap…
Critical Review—Photocurrent Spectroscopy in Corrosion and Passivity Studies: A Critical Assessment of the Use of Band Gap Value to Estimate the Oxid…
2017
A critical assessment of the Photocurrent Spectroscopy (PCS) Technique for the semi-quantitative characterization of passive film and corrosion layers composition is carried out. We take into account more than three decades of PCS usage as "in-situ" analytical technique and related results as well as the criticism of the underlying semi-empirical correlation relating the measured optical bandgap (Eg) to the passive film composition. The discrepancies between the experimental data, gathered by PCS measurements, and Egestimates originating from recently developed Density Functional Theory based modeling of solid state properties are stressed with particular emphasis on the case of anodic pass…