Search results for "Photoelectrochemistry"

Photoelectrochemical monitoring of rouging and de-rouging on AISI 316L

2017

Electrochemical conditions for inducing rouging on surface of AISI 316L in quasi neutral aqueous solution are studied. Potentiostatic polarization at 0.6 V vs. SSC at pH ∼ 7 allowed growth of colourless passive films with a band gap slightly lower than that estimated for the oxide grown on the SS surface by air exposure due to chromium dissolution. Under stronger anodic polarization (UE = 1.5 V vs. SSC) coloured passive films are formed, mainly constituted by iron oxide according to their band gap (Eg = 2.0 eV). Etching in citric acid at 60 °C results to be effective in removing rouging.

Photoelectrochemical evidence of inhomogeneous composition at nm length scale of anodic films on valve metals alloys

2016

Abstract Anodic films of different thickness (∼30 nm and 70 nm) were grown by anodizing sputtering-deposited Ta-19at% Al to different formation voltages. N incorporation into the anodic films was inducing by performing the anodizing process in ammonium containing solutions. Layered anodic films were prepared by a double formation procedure with a first anodizing step in ammonium biborate solution and second anodizing step in borate buffer solution, or vice versa. Glow Discharge Optical Emission Spectroscopy was employed to show the distribution of N across the oxide. Photoelectrochemical measurements evidenced a red shift of the light absorption threshold due to N incorporation. A model was…

Manipulation of charge transfer and transport in plasmonic-ferroelectric hybrids for photoelectrochemical applications

2016

Utilizing plasmonic nanostructures for efficient and flexible conversion of solar energy into electricity or fuel presents a new paradigm in photovoltaics and photoelectrochemistry research. In a conventional photoelectrochemical cell, consisting of a plasmonic structure in contact with a semiconductor, the type of photoelectrochemical reaction is determined by the band bending at the semiconductor/electrolyte interface. The nature of the reaction is thus hard to tune. Here instead of using a semiconductor, we employed a ferroelectric material, Pb(Zr,Ti)O3 (PZT). By depositing gold nanoparticle arrays and PZT films on ITO substrates, and studying the photocurrent as well as the femtosecond …

Influence of post formation proceses on electrochemical and photoelectrochemical behaviour of TiO2 nanotubes

2011

Study of a chromia-forming alloy behavior as interconnect material for High Temperature Vapor Electrolysis

2011

In High Temperature Vapor Electrolysis (HTVE) system, the materials chosen for the interconnectors should have a good corrosion behaviour in air and in H2-H2O mixtures at 800°C, and keep a high electronic conductivity over long durations as well. In this context, the first goal of this study was to evaluate a commercial ferritic alloy (the K41X alloy) as interconnect for HTVE application. Oxidation tests in furnace and in microbalance have therefore been carried out in order to determine oxidation kinetics. Meanwhile, the Area Specific Resistance (ASR) was evaluated by Contact Resistance measurements performed at 800°C. The second objective was to improve our comprehension of chromia-formin…

Photoelectrochemical investigation of passive layers formed on Fe in different electrolytic solutions

2004

Abstract The passive films formed on Fe in different electrolytic solutions, spanning almost the overall pH range, and with different growth procedures were investigated systematically by photocurrent spectroscopy. The potentiodynamic growth curves are compared both in aerated and de-aerated electrolytes and a potentiostatic growth procedure is also employed. For high positive formation potentials, similar anodic spectra are recorded in all solutions giving an optical gap very close to that expected for crystalline Fe2O3. The origin of photocurrent spikes is also investigated and the effect of the formation potential upon the measured absorption threshold is discussed taking into account th…

Photoelectrocatalyzed degradation of a pesticides mixture solution (chlorfenvinphos and bromacil) by WO3 nanosheets

2019

[EN] A photoelectrocatalyst consisting of WO3 nanosheets or nanorods has been synthesized by electrochemical anodization under hydrodynamic conditions, and has been used for the degradation of two toxic pesticides: chlorfenvinphos and bromacil. Nanostructures have been characterized by FESEM and Raman spectroscopy. Photoelectrochemical degradation tests have been carried out both for individual pesticide solutions and for a mixture solution, and the concentration evolution with time has been followed by UV¿Vis spectrophotometry. For individual pesticides, pseudo-first order kinetic coefficients of 0.402 h¿1 and 0.324 h¿1 have been obtained for chlorfenvinphos and bromacil, respectively, whi…

A Photoelectrochemical Study of Passivating Layers on Nickel

1995

Improvement of photocatalytic and photoelectrochemical activity of ZnO/TiO2 core/shell system through additional calcination: Insight into the mechan…

2017

Abstract ZnO/TiO2 composites were prepared by sol-gel deposition of TiO2 on ZnO nanorods hydrothermally grown on electrically conductive indium tin oxide substrate (ITO). It has been shown that the ZnO/TiO2 interface plays a key role in enhancement of photodecomposition of methylene blue (MB) used as a model test pollutant, under monochromatic light irradiation (400 nm). The increase of photocatalytic activity was attributed to the shift of absorption edge of ZnO/TiO2 towards visible light in comparison with bare TiO2. Further enhancement of photocatalytic activity of ZnO/TiO2 was achieved through its additional calcination at 450 °C for 3 h. This treatment brings 40% increase in the rate o…

AMORPHOUS SEMICONDUCTOR-ELECTROLYTE JUNCTION. A NEW INTERPRETATION OF THE IMPEDANCE DATA OF AMORPHOUS SEMICONDUCTING FILMS ON METALS.

1986

On the basis of the theory of amorphous semiconductor Schottky barrier an equivalent electrical circuit of the amorphous oxide film/electrolyte interface is proposed.—The analytical expressions for the equivalent conductance and capacitance of the barrier are reported in the hypothesis of a constant density of states within the mobility gap.—According to this model, the semiconducting properties and the impedance behaviour at different frequencies of anodic oxide films on Niobium are interpreted by taking into account the amorphous nature of the films.—An explanation for the anomalous behaviour of the Mott-Schottky plots usually observed with amorphous anodic oxide films is presented.—The p…