Search results for "Photoelectron spectroscopy"
showing 10 items of 439 documents
MoO (x≤2) ultrathin film growth from reactions between metallic molybdenum and TiO2 surfaces
2001
Abstract Exposures to oxygen at room temperature and annealings under vacuum were carried out on deposits obtained from molybdenum interacting with (1 1 0) TiO 2 surfaces in order to obtain molybdenum oxide ultra thin films. Exposures to oxygen at room temperature show that the interfacial molybdenum oxide layers resulting from the TiO 2 /Mo interactions are inactive towards oxygen whereas the metallic molybdenum clusters, which grew on top of the interfacial layers, oxidise into MoO 3 . Besides, during annealings under vacuum, substrate oxygen anions can diffuse into the deposit. Thus, between 400 and 500°C, molybdenum oxide layers are progressively oxidised into MoO 2 . Moreover, from the…
Study of interface diffusion of Ti and TiN PVD layers by Bremsstrahlung-induced AES
1992
The influence of heat treatment in ultrahigh vacuum (UHV) on Ti and TiN layers coated by physical vapour deposition (PVD) has been studied by AES, XPS and bremsstrahlung-induced AES. It could be concluded that up to 500 o C (1 h) the Ti layer does not change significantly. At the TiN/steel substrate interface, however, a counter-diffusion of nitrogen and adventitious oxygen takes place, resulting in partial nitridation of the steel substrate and oxidation of the coating
Characterization of [Cu]-MCM-41 by XPS and CO or NO adsorption heat measurements
2002
We report the characterization of copper doped MCM-41 prepared by original direct synthesis by XPS and adsorption calorimetry of CO and NO, which are selective molecular probes for Cu(I) and Cu(II) respectively. Investigation of the nature of the copper ions in this particular calcined Cu-MCM-41 by NO adsorption calorimetry shows that two types of energetically distinct adsorption sites exist, meaning the presence of two populations of Cu(II) species differently coordinated to the silica surface in quasi-equimolar concentration, as ascertained by XPS data. A small amount of Cu(I) was also detected, probably stemming from a partial reduction upon the successive vacuum treatments. The respect…
Tuning the Magnetic Properties of Carbon by Nitrogen Doping of Its Graphene Domains
2015
Here we present the formation of predominantly sp-coordinate carbon with magnetic- and heteroatom-induced structural defects in a graphene lattice by a stoichiometric dehalogenation of perchlorinated (hetero)aromatic precursors [hexachlorobenzene, CCl (HCB), and pentachloropyridine, NCCl (PCP)] with transition metals such as copper in a combustion synthesis. This route allows the build-up of a carbon lattice by a chemistry free of hydrogen and oxygen compared to other pyrolytic approaches and yields either nitrogen-doped or -undoped graphene domains depending on the precursor. The resulting carbon was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM…
CEMS/XPS study of iron stearate Langmuir-Blodgett layers
1991
Langmuir-Blodgett mono- and multilayers of ferric stearate have been formed on oxidized silicon wafers. Thermodesorption of these layers was investigated by conversion electron Mossbauer and photoelectron spectroscopy and some complementary methods. Heating of samples in air up to 523 K leads to a desorption of the fatty acid chains, while the ferric ions are left on the substrate surface. These ions do not cluster laterally like it was found for Cd ions. They form a rather homogeneous, closed oxidic layer. This well defined layer may be used afterwards for further studies of surface reactions as well as interface and intra-layer interactions. The surface iron ions were found to exhibit a r…
ZnO films grown by MOCVD on GaAs substrates: Effects of a Zn buffer deposition on interface, structural and morphological properties
2009
Abstract Integration of ZnO with the well-developed GaAs technology presents several aspects that need to be previously analyzed and considered. The large lattice mismatch between ZnO and GaAs and its different crystallographic structure lead to many structural defects. In addition, their potential chemical reactivity is another source of complexity and an academic challenge. Recently some interesting contributions on this subject have been carried out by Liu and co-workers. As an additional step to the knowledge of the ZnO/GaAs heterostructure, we have deepened on the study of the morphology and orientation of ZnO thin films grown by atmospheric pressure metal-organic chemical vapour depos…
Gold catalysts supported on CeO2 and CeO2–Al2O3 for NO reduction by CO
2006
Abstract The reduction of NO x by CO was studied over gold catalyst supported on ceria and ceria–alumina. The mixed supports with different CeO 2 /Al 2 O 3 ratios were prepared by co-precipitation. The catalysts were characterized by means of XRD, TPR, XPS and Raman spectroscopy. The addition of alumina led to a slight enlargement of the gold particles, while the ceria particle size was decreased. Deeper oxygen vacancies formation in the presence of alumina was detected by TPR, XPS and Raman spectroscopy, compared to the pure ceria support. The samples exhibited a high and stable activity and 100% selectivity towards N 2 was reached at 200 °C.
Effect of Ti(IV) loading on CO oxidation activity of gold on TiO2 doped amorphous silica
2006
Abstract Amorphous SiO 2 , doped with various amount of TiO 2 , was used as support for gold nanoparticles. Gold was deposited through the controlled sol formation technique. The effect of the TiO 2 loading on the structural and surface properties was investigated by transmission electron microscopy, X-ray diffraction, Raman and X-ray photoelectron spectroscopy. The catalytic behavior was tested in the oxidation of CO. A significant enhancement in the activity was observed for the gold supported on mixed oxide with low TiO 2 loading. On the basis of characterization data, the positive effect is assigned to the electronic modification of the Ti(IV) of the newly formed Ti O Si bonds.
Structural characterisation of silica supported CoMo catalysts by UV Raman spectroscopy, XPS and X-ray diffraction techniques
2002
The structure of Co-Mo catalysts supported on commercial silica, doped with various amounts of sodium ions, was investigated by means of X-ray diffraction (XRD), UV-Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). Two series of samples were considered. One series was prepared by classic incipient wet impregnation (WI) and the other series by co-impregnation in the presence of nitrilotriacetic acid (NTA). The effect of sodium on the catalyst structure depended on the preparation procedure: in the case of the WI catalysts, sodium promoted the transformation of the polymolybdate species into monomolybdate Na2MoO4; in the case of the NTA prepared samples, sodium induced transforma…
Preparation and photoactivity of nanocrystalline TiO2 powders obtained by thermohydrolysis of TiOSO4
2013
Nanocrystalline TiO2 photocatalysts were synthesized in mild conditions by thermohydrolysis of TiOSO4 in water at 100 °C and post-calcination treatment at various temperatures. The TiO2 powders were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, specific surface area determinations, scanning electron microscopy and electron paramagnetic resonance measurements. The photoactivity of the samples was tested employing the photodegradation of 4-nitrophenol in liquid–solid regimen and the photooxidation of gaseous 2-propanol. The best results were obtained with the powder calcined at 600 °C for 10 h. Surprisingly, the not calcined sample was the most active for the abatement…