Search results for "Pie"
showing 10 items of 4404 documents
SINTERING OF LEAD-FREE (K0.5Na0.5)NbO3 BASED SOLID SOLUTION
2009
ABSTRACT In this study lead-free solid solution (K0.5Na0.5)NbO3 was prepared, structure, dielectric parameters of ceramics were investigated. The doping of sintering aids did not affect the crystallographic structure of the ceramics significantly; all ceramic samples had a single-phase perovskite structure. Added elements CdO, ZnO, MnO2, V2O5 effectively decreased the sintering temperature of KNN by 50°–80°C. All sintering aids influenced sinterability, microstructure and dielectric properties of ceramics. Dielectric constant for doped samples increased from 6000 up to 8000; Pr = 15 μC/cm2, Ec = 9 kV/cm, d33 = 110 pC/N, kp = 0.38 and Qm = 190 for MnO2 doped samples.
Jet-vortex spray freeze drying for the production of inhalable lyophilisate powders
2016
Abstract Spray-freeze-dried powders were suggested for nasal, epidermal (needle-free injection) or pulmonary application of proteins, peptides or nucleic acids. In spray-freeze-drying processes an aqueous solution is atomized into a refrigerant medium and subsequently dried by sublimation. Droplet-stream generators produce a fast stream of monodisperse droplets, where droplets are subject to collisions and therefore the initial monodispersity is lost and droplets increase in diameter, which reduces their suitability for pulmonary application. In jet-vortex-freezing, a droplet-stream is injected into a vortex of cold process gas to prevent droplet collisions. Both the injection position of t…
Spray-Drying, Solvent-Casting and Freeze-Drying Techniques: a Comparative Study on their Suitability for the Enhancement of Drug Dissolution Rates.
2019
Purpose Solid dispersions (SDs) represent the most common formulation technique used to increase the dissolution rate of a drug. In this work, the three most common methods used to prepare SDs, namely spray-drying, solvent-casting and freezedrying, have been compared in order to investigate their effect on increasing drug dissolution rate. Methods Three formulation strategies were used to prepare a polymer mixture of polyvinyl-alcohol (PVA) and maltodextrin (MDX) as SDs loaded with the following three model drugs, all of which possess a poor solubility: Olanzapine, Dexamethasone, and Triamcinolone acetonide. The SDs obtained were analysed and compared in terms of drug particle size, drug-lo…
Fatigue strength of a single lap joint SPR-bonded
2011
In the last years, hybrid joints, meaning with this the joints which consist in combining a traditional mechanical joint to a layer of adhesive, are gradually attracting the attention of various sectors of the construction of vehicles and transportation industries, for their better performance compared to just mechanical joints (self-piercing riveting SPR, riveting, and so on) or just to bonded joints. The paper investigates the fatigue behavior of a single lap joint self-piercing riveted (SPR) and bonded throughout fatigue tests. The considered geometric configuration allowed the use of two rivets placed longitudinally; an epoxy resin was used as adhesive. In the first part of the work sta…
Active shape correction of a thin glass/plastic x-ray mirror
2015
Optics for future X-ray telescopes will be characterized by very large aperture and focal length, and will be made of lightweight materials like glass or plastic in order to keep the total mass within acceptable limits. Optics based on thin slumped glass foils are currently in use in the NuSTAR telescope and are being developed at various institutes like INAF/OAB, aiming at improving the angular resolution to a few arcsec HEW. Another possibility would be the use of thin plastic foils, being developed at SAO and the Palermo University. Even if relevant progresses in the achieved angular resolution were recently made, a viable possibility to further improve the mirror figure would be the app…
Solution-processible electrode materials for a heat-sensitive piezoelectric thin-film sensor
2012
Abstract Piezoelectric sensors are needed in a wide range of applications from physiological measurement applications to industrial monitoring systems. Custom-designed, highly integratable and cost-effective sensor elements can be manufactured by using flexible materials in combination with high-throughput printing for fabrication. This would also enable the embedding of ubiquitous sensors in our living environment to improve the common welfare. Here, we have fabricated flexible piezoelectric sensor elements using printing methods. We demonstrated that alternative, printable electrode materials are compatible with temperature-sensitive functional substrates. Low-temperature curable electrod…
In Vitro–In Vivo Fluctuation Spectroscopies
2010
Fluorescence correlation spectroscopy (FCS) was first developed for biophysical studies in analogy with photon scattering correlation spectroscopy. Although it is mainly devoted to the study of freely diffusing particles, FCS is actually able to discern between different kinds of motions, such as diffusion, anomalous diffusion, or drift motions. The frontier application of FCS nowadays is in medical studies both within cells and on the cell membranes, and in the investigation of single molecules in solid matrices. In this field, FCS originated also image correlation spectroscopy methods. The whole field can be unified under the name of fluorescence fluctuation spectroscopy (FFS). We present…
Bending Sensors Based on Thin Films of Semitransparent Bithiophene-Fulleropyrrolidine Bisadducts
2020
In this study, a novel bithiophene‐fulleropyrrolidine bisadducts system (bis‐Th2PC 60 ) was synthesized and electropolymerized by chronoamperometry onto flexible ITO/PET substrates. The resulting semitransparent thin film was characterized by XPS, FT‐IR, cyclic voltammetry and optical techniques, confirming the good outcome of the electropolymerization process. AFM investigations permitted to highlight an inherent disordered granular morphology, in which the grain‐to‐grain separation depends upon the application of bending. The electrical resistance of the thin film was characterized as function of bending (in the range 0°‐90°), showing promising responsivity to low bending angles (10°‐30°)…
Dipoles in 4,12,4-graphyne
2021
Abstract In present work, B-N pairs as dipole source were introduced into 4,12,4-graphyne. According to the density functional theory (DFT) simulations, the electronic configurations of the doped 4,12,4-graphyne systems were significantly modified owing to the built-in electric fields caused by the B-N dipoles. Different B-N concentrations and arrangements can alter the electronic structure of 4,12,4-graphyne. Consequently, an obvious in-plane piezoelectricity can also be induced. Moreover, the direct band gap can be delicately modulated from 150 meV to 660 meV at PBE level. The B-N dipoles can also greatly enhance the light absorption instead of shifting the absorption region. According to…
Effect of curing time on the performances of hybrid/mixed joints
2013
Abstract The aim of this work is the study of a mixed method used for the joining of aluminum alloys with glass reinforced polymer’s substrates (in the next GFRP). In particular, the technique of self-piercing riveting (in the next SPR) was applied on a co-cured joint in order to evaluate the influence of the time of inserting the rivet on the mechanical behavior of the mixed joints. Three different joints were realized: adhesive by co-curing technique, mechanical by self piercing riveting (in the next SPR) and a mixed one in which the joining techniques (i.e. adhesive and mechanical) were combined. In particular, to determine the optimum time to insert the rivet, three different times from…