Search results for "Poly(methacrylic acid)"
showing 10 items of 29 documents
Wetting ability of an acetone/based etch rinse adhesive after NaOCl-treatment
2011
Objectives: to evaluate the effect of sodium hypochlorite (NaOCl) treatment on surface dentin roughness (Ra) and contact angle (CA) when using Prime&Bond NT adhesive (PB NT). Study Design: Extracted human third molars were sectioned to expose flat, superficial and deep dentin surfaces. CA and Ra were measured (1) before and (2) after 35% H3PO4 etching, and (3) H3PO4 etching + 5% NaOCl treated for 2 minutes before the application of PB NT. CA was measured by the Axisymmetric Drop Shape Analysis Technique using distilled and deionized water and PB NT. Roughness was evaluated with a profilometer, twelve radial measurements were performed in each treatment surface. Data were analyzed with two-w…
Reduction of Polymerization Shrinkage Stress and Marginal Microleakage Using Soft-Start Polymerization
2003
Purpose: This study evaluated the influence of a soft-start light-curing exposure on polymerization shrinkage stress and marginal integrity of adhesive restorations. Materials and Methods: Six resin-based composites (Pertac II, Tetric Ceram, Definite, Surefil, Solitaire, and Visio-Molar) were adhesively bonded to a cylindrical cavity (n = 9 per material/light) in a photoelastic material. Visible light-curing was applied using either the standard polymerization mode (800 mW/cm2 exposure duration 40 s) of the curing light (Elipar TriLight, 3M ESPE) or the exponential mode from the same device (ramp-curing: 150 mW/cm2 to 800 mW/cm2 within the first 15 s of a total curing time of 40 s). Polymer…
A NANOPARTICULATE DRUG-DELIVERY SYSTEM FOR RIVASTIGMINE: PHYSICO-CHEMICAL AND IN VITRO BIOLOGICAL CHARACTERIZATION
2007
The preparation and characterization of surface-PE Gylated polymeric nanoparticles are described. These systems were obtained by UV irradiation of PHM and PHM-PEG(2000) as an inverse microemulsion, using an aqueous solution of the PHM/PHM-PEG(2000) copolymer mixture as the internal phase and triacetin saturated with water as the external phase, and characterized by dimensional analysis, zeta-potential measurements and XPS. in vitro biological tests demonstrated their cell compatibility and their ability to escape from phagocytosis. Rivastigmine was encapsulated into the nanoparticle structure and drug-release profiles from loaded samples were investigated in PBS at pH = 7.4 and human plasma.
Polymeric Selectin Ligands Mimicking Complex Carbohydrates: From Selectin Binders to Modifiers of Macrophage Migration
2016
Novel polymeric cell adhesion inhibitors were developed in which the selectin tetrasaccharide sialyl-LewisX (SLeX ) is multivalently presented on a biocompatible poly(2-hydroxypropyl)methacrylamide (PHPMA) backbone either alone (P1) or in combination with O-sulfated tyramine side chains (P2). For comparison, corresponding polymeric glycomimetics were prepared in which the crucial "single carbohydrate" substructures fucose, galactose, and sialic acid side chains were randomly linked to the PHPMA backbone (P3 or P4 (O-sulfated tyramine)). All polymers have an identical degree of polymerization, as they are derived from the same precursor polymer. Binding assays to selectins, to activated endo…
Mechanical properties of provisional dental materials: A systematic review and meta-analysis
2018
Provisional restorations represent an important phase during the rehabilitation process, knowledge of the mechanical properties of the available materials allows us to predict their clinical performance. At present, there is no systematic review, which supports the clinicians' criteria, in the selection of a specific material over another for a particular clinical situation. The purpose of this systematic review and meta-analysis was to assess and compare the mechanical properties of dimethacrylates and monomethacrylates used in fabricating direct provisional restorations, in terms of flexural strength, fracture toughness and hardness. This review followed the PRISMA guidelines. The searche…
Development of pipette tip-based poly(methacrylic acid-co-ethylene glycol dimethacrylate) monolith for the extraction of drugs of abuse from oral flu…
2019
Abstract In this work, a monolithic polymer based on poly(methacrylic acid-co-ethylene glycol dimethacrylate) (MAA-co-EDMA) was prepared inside 200 μL pipette tips for the extraction of drug of abuse from oral fluid samples. After an appropriate surface tip modification, several polymerization mixtures with different monomer/cross-linker ratios, and percentage of porogen were studied. The most appropriate monolith to easily flow organic solvents and oral fluid samples was prepared with a MAA/EDMA ratio of 8:92 wt/wt and dodecanol containing 10 wt% toluene, as porogenic solvent. Parameters affecting the extraction procedure were evaluated and the monolith was characterized in terms of bindin…
Partially Quarternized Amino Functional Poly(methacrylate) Terpolymers: Versatile Drug Permeability Modifiers
2011
Partially quarternized poly(methacrylate) terpolymers (Q-BBMCs) have been synthesized, based on the basic butylated methacrylate copolymer (BBMC/EUDRAGIT E), an excipient approved by the Food and Drug Administration (FDA) and to date mainly applied for tablet coatings. Via straightforward polymer modification reactions, a series of Q-BBMCs with quarternization degrees of 22%, 42%, and 65% has been prepared. Apical to basolateral transport across Caco-2 cell monolayers was investigated, employing the paracellular transported compounds trospium and mannitol. At pH 6.5 quarternization resulted in increased permeation enhancement up to 2.8-fold compared to BBMC, that is, up to 7.3-fold compared…
in vitro biological evaluation of folate-functionalized block copolymer micelles for selective anti-cancer drug delivery.
2008
The main objective of this study was to evaluate the ability of folic acid-functionalized diblock copolymer micelles to improve the delivery and uptake of two poorly water-soluble anti-tumor drugs, tamoxifen and paclitaxel, to cancer cells through folate receptor targeting. The diblock copolymer used in this study comprised a hydrophilic poly[2-(methacryloyloxy)ethyl phosphorylcholine] (MPC) block, carrying at the chain end the folate targeting moiety, and a pH-sensitive hydrophobic poly[2-(diisopropylamino)ethyl methacrylate] (DPA) block (FA-MPC-DPA). The drug-loading capacities of tamoxifen- and paclitaxel-loaded micelles were determined by high performance liquid chromatography and the m…
Sumatriptan Succinate Transdermal Delivery Systems for The Treatment of Migraine
2007
We have successfully obtained sumatriptan transdermal systems with different polymer compositions: methyl cellulose (MC), polyvinyl pyrrolidone (PVP) and a polyvinyl pyrrolidone (PVP)-polyvinyl alcohol (PVA) mixture. The systems contained 1,2-propylenglycol (MC) or sorbitol as a plasticizer (PVP and PVP-PVA), methacrylate copolymer as an adhesive agent, and an occlusive liner. Azone (5%, w/w) was incorporated into all the systems as a percutaneous enhancer. Transdermal systems are thin, transparent and non-adhesive when in a dry state. The permeation of sumatriptan succinate across pig ear skin was studied using the systems prepared. The formulation with MC polymer produced a statistically …
Toxicity of a dental adhesive compared with ionizing radiation and zoledronic acid
2015
Background: To determine the toxicity of aqueous dilutions of a universal self-priming dental adhesive (DA) and comparing these with those elicited by exposure to ionizing radiation (IR), Zoledronic acid (Z) treatment and the synergic effects of the combined treatment with IR+Z. Material and Methods: The genotoxic effect of DA was determined by the increase in the frequency of micronuclei in cytokinesis-blocked in cultured human lymphocytes before and after exposure to 2Gy of X-rays. The cytotoxic effect was studied by using the MTT cell viability test in normal prostate cell lines (PNT2) after exposure to different X-ray doses (0Gy-20Gy). The cell lines divided into different groups and tr…