Search results for "Polycaprolactone"
showing 10 items of 45 documents
Diene/polar monomer copolymers, compatibilisers for polar/non-polar polymer blends. A controlled block copolymerisation with a single-site component …
2002
A well-controlled two-step process, the polymerisation of isoprene or isoprene/hex-1-ene copolymerisation followed by e-caprolactone polymerisation, affords trans-polyisoprene or (trans-polyisoprene/hex-1-ene copolymer)–poly(e-caprolactone) diblocks of various lengths. The single component initiator is an allylsamarocene compound. An atomic force microscopy study shows that these copolymers are efficient compatibilisers for poly(e-caprolactone) and polyisoprene blends. Poly(e-caprolactone) chain growth from Sm–polyisoprene chain.
Performance of polyester-based electrospun scaffolds under in vitro hydrolytic conditions: From short-term to long-term applications
2019
The evaluation of the performance of polyesters under in vitro physiologic conditions is essential to design scaffolds with an adequate lifespan for a given application. In this line, the degradation-durability patterns of poly(lactide-co-glycolide) (PLGA), polydioxanone (PDO), polycaprolactone (PCL) and polyhydroxybutyrate (PHB) scaffolds were monitored and compared giving, as a result, a basis for the specific design of scaffolds from short-term to long-term applications. For this purpose, they were immersed in ultra-pure water and phosphate buffer solution (PBS) at 37 °
Synthesis and degradation of poly (2-hydroxyethyl methacrylate)-graft-poly (ε-caprolactone) copolymers
2004
Abstract Poly (e-caprolactone) macromonomers carrying a methacryloyl end groups were synthesized using different lanthanide derivatives as catalysts, and characterized by SEC and 1 H NMR. Hydrophilic–hydrophobic copolymers from macromonomers and 2-hydroxyethyl methacrylate (HEMA) were obtained by solution free radical polymerization. Depending on the feed ratio of the two components, different copolymer structures were obtained. The expected graft structure of the copolymers was confirmed by 1 H NMR. Thermal properties of the copolymers were determined by DSC and TGA. Hydrolytic and enzymatic degradations of the materials were performed. Poly (2-hydroxyethyl methacrylate)- graft -poly (e-ca…
Rapid One-Step Fabrication of Graphene Oxide-Decorated Polycaprolactone Three-Dimensional Templates for Water Treatment
2020
Coating of flexible substrates is crucial to prepare versatile, multifunctional materials. However, exploration of effective fabrication approaches is still a challenging issue, because the pathways generally proposed require time-consuming, multistep protocols. Here, we developed a one-pot process for decorating either pearl necklace-like or fibrous fluffy-like structures of polycaprolactone (PCL) with graphene oxide (GO) skin. PCL solutions were dry jet-wet electrosprayed or electrospun into a stirred liquid collector constituted by ethanol-containing GO nanoparticles. The stirred liquid collector enables the formation of 3D-structures, whose microarchitecture can be designed by controlli…
Nanoscale Blends between Immiscible Polymers via Simultaneous Non-Interfering Polymerisation
2005
An important topic in polymer science seeks to improve the performances of polymer blends using nanoscale phase segregation. Here, blends between polystyrene and polycaprolactone are realised by a chemical route. The non-interfering character of the radical polymerisation of styrene and the lanthanide halide initiated ring-opening polymerisation of caprolactone is assessed. The molecular weights range from 2 000 to 3 500 for polycaprolactone and up to 140 000 for polystyrene, with reasonable polydispersity indexes. From calorimetry measurements, it is shown that polystyrene and low molecular weight polycaprolactone are immiscible. The morphology of the blends between the two immiscible poly…
Polycaprolactone/gelatin-based scaffolds with tailored performance: in vitro and in vivo validation
2019
Abstract Nanofibrous scaffolds composed of polycaprolactone (PCL) and gelatin (Ge) were obtained through a hydrolytic assisted electrospinning process. The PCL-to-Ge proportion (100/0 to 20/80), as well as the dissolution time (24, 48, 72, 96, 120 h) into a 1:1 formic/acetic acid solvent before electrospinning were modified to obtain the different samples. A strong influence of these factors on the physicochemical properties of the scaffolds was observed. Higher Ge percentage reduced crystallinity, allowed a uniform morphology and increased water contact angle. The increase in the dissolution time considerably reduced the molar mass and, subsequently, fibre diameter and crystallinity were a…
Integration of PCL and PLA in a monolithic porous scaffold for interface tissue engineering.
2016
A novel bi-layered multiphasic scaffold (BLS) have been fabricated for the first time by combining melt mixing, compression molding and particulate leaching. One layer has been composed by polylactic acid (PLA) presenting pore size in the range of 90-110µm while the other layer has been made of polycaprolactone (PCL) with pores ranging from 5 to 40µm. The different chemo-physical properties of the two biopolymers combined with the tunable pore architecture permitted to realize monolithic functionally graded scaffolds engineered to be potentially used for interface tissues regenerations. BLS have been characterized from a morphological and a mechanical point of view. In particular, mechanica…
Conductive polycaprolactone/gelatin/polyaniline nanofibres as functional scaffolds for cardiac tissue regeneration
2022
Abstract The endorsement of functional features such as biocompatibility, mechanical integrity, or electrical conductivity to tissue engineering (TE) scaffolds is essential to stimulate cell adhesion and proliferation. In this study, electrospun nanofibers based on polycaprolactone (PCL) and gelatin (Ge) (ratios 60/40, 50/50, and 40/60), and polyaniline (PAni) particles (0.25, 0.50, and 1.00%wt) were prepared. The time of dissolution in an acid solvent mixture before electrospinning allowed for obtaining nanofibers with controlled features. Changes in the molar mass (Mn from 90·103 to 15·103 g·mol−1), in the crystalline microstructure (Xc from 60 to 25%) and the surface morphology (diameter…
Tunable release of Chlorhexidine from Polycaprolactone-based filaments containing graphene nanoplatelets
2019
Abstract Graphene nanoplatelets (GNP) as fillers and Chlorhexidine (CHX), as an antibacterial agent, were incorporated in a polycaprolactone (PCL) matrix and processed into filaments by melt spinning. The influence of both drawing and formulation on the processability, spinnability, mechanical properties and release behaviour of these materials were deeply investigated by performing rheological, morphological analysis, tensile tests, and by measuring the cumulative release of CHX in PBS at 37 °C. Furthermore, Korsmeyer–Peppas model was adopted to study the kinetics release mechanism. The results showed that adding GNP did not alter the processability and spinnability of the systems. Further…
Polycaprolactone-based scaffold for oil-selective sorption and improvement of bacteria activity for bioremediation of polluted water
2017
Abstract A novel floatable and biodegradable sponge for the selective absorption of oil from water and potentially useful as cell carrier for bioremediation treatments was prepared in polycaprolactone (PCL). The eco-friendly process for fabricating the PCL sponge does not involve either synthetic routes or organic solvents, thus minimizing environmental hazard. In particular, the 3D porous materials have been prepared by mixing in the melt the polymer matrix with two water-soluble porogen agents (NaCl and PEG) and thereafter leaching the obtained PCL/NaCl/PEG composites in water. The PCL sponges here proposed are capable to remove different types of oily pollutants (up to 500 wt%), and were…