Search results for "Polypropylene"
showing 10 items of 177 documents
Thermal Stability and Flame Retardancy of Polypropylene Composites Containing Siloxane-Silsesquioxane Resins
2018
A novel group of silsesquioxane derivatives, which are siloxane-silsesquioxane resins (S4SQ), was for the first time examined as possible flame retardants in polypropylene (PP) materials. Thermal stability of the PP/S4SQ composites compared to the S4SQ resins and neat PP was estimated using thermogravimetric (TG) analysis under nitrogen and in air atmosphere. The effects of the non-functionalized and n-alkyl-functionalized siloxane-silsesquioxane resins on thermostability and flame retardancy of PP materials were also evaluated by thermogravimetry-Fourier transform infrared spectrometry (TG-FTIR) and by cone calorimeter tests. The results revealed that the functionalized S4SQ resins may for…
Considering lithium-ion battery 3D-printing via thermoplastic material extrusion and polymer powder bed fusion
2021
Abstract In this paper, the ability to 3D print lithium-ion batteries through Pmnbspace thermoplastic material extrusion and polymer powder bed fusion is considered. Focused on the formulation of positive electrodes composed of polypropylene, LiFePO4 as active material, and conductive additives, advantages and drawbacks of both additive manufacturing technologies, are thoroughly discussed from the electrochemical, electrical, morphological and mechanical perspectives. Based on these preliminary results, strategies to further optimize the electrochemical performances are proposed. Through a comprehensive modeling study, the enhanced electrochemical suitability at high current densities of va…
In-situ polymerization of polyaniline in radiation functionalized polypropylene films
2015
Abstract In-situ generation of a nanodispersed conductive polymer within a polypropylene matrix has been pursued in order to obtain flexible, conductive films. Radiation grafting of acrylic acid to polypropylene (PP) has been applied to insert carboxyl functionalities on PP. The radiation-grafted films have been further derivatized with a variety of diamines and used as substrates for in-situ chemical oxidative polymerization of polyaniline (PANI). PANI grows as a thin skin from the surface of the film as well as an interpenetrated network in its interiors. Evidence of chemical attachment of PANI to PP has been sought by performing FTIR and XPS analyses after extraction of the unbound polym…
A general concept for the introduction of hydroxamic acids into polymers.
2019
Polyethers (PEG) with hydroxamic acid groups enable chelation of a variety of metal ions, coating of metal oxide surfaces and stabilization of nanoparticles. In contrast to catechol, hydroxamic acids are oxidation stable and biocompatible.
Compatibilization of blends of polyethylene with a semirigid liquid crystalline polymer by PE-g-LCP copolymers
1997
The blends of thermoplastics with liquid crystalline polymers show, in general, poor properties because of the lack of adherence between the two phases. The use of ad hoc synthesized copolymers containing the monomer units of the two polymers has been recently considered by some of us for blend compatibilization, and the results appear promising. In this work, new PE-g-LCP copolymers, prepared either by the synthesis of the LCP in the presence of a functionalized PE, or by reactive blending of the latter polymer with preformed LCP, have been employed as compatibilizing additives for blends of PE with a semirigid LCP. The morphology and the rheological and mechanical properties of the ternar…
Durability of a strach-based biodegradable polymer
2007
Abstract The photo-oxidation and the photo-stabilization of a commercial biodegradable polymer have been investigated in order to establish the possibility of using this polymer as raw material for films for agriculture. The degradation has been followed by measuring the mechanical properties as a function of photo-oxidation time and in particular by following the elongation at break. The virgin polymer, made from maize starch and a synthetic biodegradable polyester, shows poor resistance to the UV irradiation as observed by the fast decay of the elongation at break, but the presence of small amounts of conventional UV stabilizers strongly improves the durability of this polymer. The UV sta…
Polymer mechanical recycling: downcycling or upcycling?
2004
Recycled plastics are considered as materials with physical, mechanical and aesthetic properties worse than the virgin ones. In fact, this is true because degradation during lifetime and during the recycling operations changes the structure and the morphology of the polymers and then the final properties of the secondary material. Several “strategies” are under investigation, and in some cases also applied, in order to avoid further degradation during recycling and, if possible, to repair the macromolecules broken during lifetime and then to restore or to improve the initial properties. In this paper the more important techniques, already used in industry or under investigation, according …
New Thermoshrinkable Materials of Radiation Modified Polypropylene-Elastomer Composites with Cross-Linking Agents
2014
In this work, electron beam modified heterogeneous composites of isotactic polypropylene (PP) with chlorinated polyethylene (CPE) have been investigated. The PP/CPE blend composites with an excess of elastomer (30/70 wt%) have been modified with trimethylolpropane triacrylate (TMPTA) and bisphenol-A-dimethacrylate (BPDMA) cross-linking agents and have been irradiated with accelerated electrons up to ionizing radiation doses from 25 to 150 kGy. The internal stresses characterizing the thermoshrinkage properties (TMP) thermorelaxation stresses formed in thermal heating and the residual stresses resulting in the process of full setting and cooling of materials have been investigated for radiat…
Recycling of the "light fraction" from municipal post-consumer plastics: Effect of adding wood fibers
1999
At present the recycling of plastic materials is mostly done using homogeneous polymers. Therefore a separation from a municipal collection of plastic objects is necessary before recycling operations. The easiest way of separation is by flotation in water, i.e. the separation of the different plastics based on the different densities with respect to water. This means that all the plastic materials are separated in a “light fraction” mostly of polypropylene and polyethylene and in a “heavy fraction” mainly of poly(vinyl chloride) (PVC) and poly(ethylene terephthalate). The recycling of the light fraction should, in principle, be easy because of the relative similarity of the chemical structu…
Study on compatibilization of polypropylene-liquid crystalline polymer blends
1997
The mechanical properties, melt rheology, and morphology of binary blends comprised of two polypropylene (PP) grades and two liquid crystalline polymers (LCP) have been studied. Compatibilization with polypropylene grafted with maleic anhydride (PP-g-MAH) has been attempted. A moderate increase in the tensile moduli and no enhancements in tensile strength have been revealed. Those findings have been attributed to the morphology of the blends, which is predominantly of the disperse mode. LCP fibers responsible for mechanical reinforcement were only exceptionally evidenced. Discussion of PP-LCP interfacial characteristics with respect to mechanical properties-morphology interrelations allowed…