Search results for "Propanol"
showing 10 items of 217 documents
Density, Viscosity, and Sound Speed of Bis(trifluoromethylsulfonyl)imide-Based Ionic Liquids + 1-Propanol Mixtures
2015
The density, viscosity, and speed of sound of three mixtures formed by 1-propanol and an ionic liquid were measured in a temperature range of 278.15–338.15 K. All measurements were made at atmospheric pressure and covered the entire range of miscible compositions. The three ionic liquids have the same anion but differ in the cation: 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [emim][NTf2], 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [bmim][NTf2], and 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [hmim][NTf2]. The experimental data allowed calculate the molar volume and isentropic compressibility of the mixture and their respective exces…
Liquid–liquid equilibria of 4-methyl-2-pentanone+1-propanol or 2-propanol+water ternary systems: Measurements and correlation at different temperatur…
2014
Abstract In this work, experimental liquid–liquid equilibria data of the systems 4-methyl-2-pentanone + 1-propanol + water and 4-methyl-2-pentanone + 2-propanol + water are presented. The liquid–liquid equilibria of both systems have been measured at 283.2 and 323.2 K. The NRTL and UNIQUAC models were successfully applied to fit the data for both ternary systems. The binodal lines were compared to the values predicted by the UNIFAC-LLE and UNIFAC models. Moreover, the solvent capability of 4-methyl-2-pentanone was checked in order to separate the azeotropic mixtures formed by propanol's and water.
Comparison of the performance of butanol and pentanol as modifiers in the micellar chromatographic determination of some phenethylamines
2000
Abstract A procedure was developed for the determination of several phenethylamines (amphetamine, arterenol, ephedrine, phenylephrine, phenylpropanolamine, mephentermine, methoxyphenamine, pseudoephedrine and tyramine), using micellar mobile phases of sodium dodecyl sulfate (SDS), a C18 column and UV detection. The drugs were eluted at short retention times with conventional acetonitrile–water or methanol–water mobile phases. In contrast, in the micellar system, they were strongly retained due to association with the surfactant adsorbed on the stationary phase, and needed the addition of butanol or pentanol to be eluted from the column. These modifiers allowed a simple way of controlling th…
Acrylate ester-based monolithic columns for capillary electrochromatography separation of triacylglycerols in vegetable oils
2011
Abstract A simple and reliable method for the evaluation of triacylglycerols (TAGs) in vegetable oils by capillary electrochromatography (CEC) with UV–Vis detection, using octadecyl acrylate (ODA) ester-based monolithic columns, has been developed. The percentages of the porogenic solvents in the polymerization mixture, and the mobile phase composition, were optimized. The optimum monolith was obtained at the following ratios: 40:60% (wt/wt) monomers/porogens, 60:40% (wt/wt) ODA/1,3-butanediol diacrylate and 23:77% (wt/wt) 1,4-butanediol/1-propanol (14 wt% 1,4-butanediol in the polymerization mixture). A satisfactory resolution between TAGs was achieved in less than 12 min with a 65:35 (v/v…
Anaerobic removal of 1-methoxy-2-propanol under ambient temperature in an EGSB reactor
2015
Two laboratory-scale expanded granular sludge bed (EGSB) reactors were operated at 18 and 25 °C, respectively, for the treatment of synthetic wastewater composed of ethanol and 1-methoxy-2-propanol (M2P) in a mass ratio of 4:1. Reactors were operated first with continuous wastewater supply and after with discontinuous substrate supply (5 days a week, 16 h a day) to simulate shift working conditions. Under continuous wastewater supply chemical oxygen demand (COD), removal efficiency higher than 95 % was achieved at the end of the trial applying organic loading rates (OLR) of 29 and 43 kg COD m(-3) day(-1) at 18 and 25 °C; thus, corresponding to M2P OLR of 6.4 and 9.3 kg COD m(-3) day(-1), re…
Numerical study of the ZnO growth by MOCVD
2004
Abstract In order to analyze the growth of zinc oxide by metalorganic chemical vapor deposition, a numerical model has been developed to simulate the gas flow in a horizontal reactor. A two-inlet system, one for the Zn precursor and the other for the oxygen one, has been studied in the framework of this numerical simulation. This model takes into account the momentum conservation equation coupled with the heat transfer and mass transport of chemical species. Different Zn precursors, DiethylZinc (DEZn), DimethylZinc (DMZn) and DimethylZinc-TriethylAmine (DMZn-TEA) and oxygen precursors, ( tert -butanol, iso -propanol and acetone) as well as carrier gases (H 2 and N 2 ) have been considered. …
Implementation of gradients of organic solvent in micellar liquid chromatography using DryLab®: Separation of basic compounds in urine samples
2014
In micellar liquid chromatography (MLC), chromatographic peaks are more evenly distributed compared to conventional reversed-phase liquid chromatography (RPLC). This is the reason that most procedures are implemented using isocratic elution. However, gradient elution may be still useful in MLC to analyse mixtures of compounds within a wide range of polarities, decreasing the analysis time. Also, it benefits the determination of moderately to low polar compounds in physiological fluids performing direct injection: an initial micellar eluent with a low organic solvent content, or a pure micellar (without surfactant) solution, will provide better protection of the column against the proteins i…
Liquid chromatographic procedure for the evaluation of β-blockers in pharmaceuticals using hybrid micellar mobile phases
1997
Abstract A reversed-phase chromatographic procedure with a micellar eluent is proposed for the determination of several β-blockers (acebutolol, atenolol, carteolol, celiprolol, labetalol, metoprolol, nadolol, oxprenolol, propranolol, and timolol) in pharmaceutical formulations (tablets, capsules, and ophthalamic solutions). A study is shown on the chromatographic behaviour of these drugs with mobile phases containing sodium dodecyl sulphate (0.075–0.15 M ) and propanol (0–15%, v/v), at different pH values (3–7). The excellent correlation between log of the octanol-water partition coefficient and log of capacity factor, for the ten drugs in mobile phases of SDS and propanol, suggested that t…
Isobaric vapor–liquid equilibria for 1-propanol+water+copper(II) chloride at 100kPa
2005
Abstract Isobaric vapor–liquid equilibria for the ternary system 1-propanol + water + copper(II) chloride has been measured at 100 kPa using a recirculating still. The addition of copper(II) chloride to the solvent mixture produced a salting-out effect of the alcohol, but the azeotrope did not tend to be eliminated when the salt content increased. The experimental data sets were fitted with the electrolyte NRTL model and the parameters of Mock's model were estimated. This model has proved to be suitable to represent experimental data in the entire range of compositions. The effect of copper(II) chloride on the vapor–liquid equilibrium of the 1-propanol + water system has been compared with …
Micellar versus hydro-organic reversed-phase liquid chromatography: a solvation parameter-based perspective.
2007
The performance of the solvation parameter model is examined for micellar liquid chromatography. The results are compared with those offered with hydro-organic eluents, intending to reveal the properties that influence the retention and distinguish the particular behaviour of micellar systems. The retention data of several series of non-ionisable and ionisable compounds (mainly steroids, polyaromatic hydrocarbons, phenols, sulfonamides, beta-blockers, phenethylamines, antihistamines, and diuretics) were used as probe compounds. The micellar mobile phases contained an anionic (sodium dodecyl sulphate), non-ionic (Brij-35), or cationic (cetyltrimethylamonium bromide) surfactant, with or witho…