Search results for "Pumping"
showing 10 items of 198 documents
Laser spectroscopy with an electrostatic ConeTrap
2017
A compact electrostatic trap has been designed and installed as part of the recent upgrades to the IGISOL IV facility. The ConeTrap provides an in vacuo optical pumping site for low energy (800 eV) ionic ensembles available for interaction periods of 10-100 ms. At present, 6.7(3) % of injected mass A=98 ions can be trapped, stored for 5 ms, extracted and transported to a laser-ion interaction region. This fraction represents those ions for which no perturbation to total energy or energy spread is observed. Proposed enhancements to the trap are designed to improve the trapping efficiency by up to a factor of 5. Differential pumping and reduction in background pressure below the present 10−6 …
Long-wavelength monolithic GaInNAs vertical-cavity optical amplifiers
2004
We report on the continuous-wave amplification characteristics of an optically pumped 1.3-μm multiple-quantum-well GaInNAs-GaAs vertical-cavity semiconductor optical amplifier (VCSOA). The VCSOA structure was monolithically grown by molecular beam epitaxy and operated in reflection mode in a fiber-coupled system. The maximum on-chip gain attained, limited by the onset of laser action, was 15.6 dB at 196 mW of 980-nm pump power. For a chip gain of 10.4 dB, the optical bandwidth was 10.8 GHz and the saturation output power was -9 dBm. By varying the pump laser power, a maximum extinction ratio of 22.3 dB was obtained. Temperature-controlled tuneable operation of the device is also presented a…
Recent Developments in Cladding-Pumped Doped Fiber Amplifiers for Telecommunications Systems
2020
This paper aims to review recent developments in the field of doped fiber-based optical amplifiers and serve as a reference for promising optical signal amplification techniques that may be useful for practical implementation in high-capacity and cost-efficient telecommunications systems. The main focus is put on different rare-earth dopant elements, double-clad fibers, and optical couplers for cladding-pumping technique. It is found that codoped double-clad fiber-based amplifiers currently have attained the main research interest and show possible application also in multichannel fiber optical transmission systems. Additionally, we have compared different free space and waveguide construct…
GaInNAs/GaAs Bragg-mirror-based structures for novel 1.3μm device applications
2004
We report the use of GaInNAs/GaAs material system for a range of 1.3 μm vertical-cavity devices namely VCSELs, VCSOAs, VECSELs and SESAMs. Using optical pumping, we demonstrate that up to 4 mW of 1290 nm output power can be fibre-coupled from a VCSEL. We also show that tayloring the VCSEL structure allows to produce a monolithic long-wavelength VCSOA with up to 16 dB of gain. We also report the first demonstration of a 1.3 μm VECSEL with more than 0.5 W of CW ouptut power. Finally, annealing effects on the properties of a GaInNAs SBR and modelocking of two Nd:doped solid state lasers using this element are described.
Diode-pumped bulk Er:Yb:Glass 1.54μm pulsed laser with 1.2J output and 25% optical efficiency
2002
We report a pulsed transversely diode-pumped compact Er:Yb:Glass laser of uncomplicated design, delivering output energy of approx. 1.2J in free-running operation and 25% optical slope efficiency.
Recent developments in chalcogenide photonic crystal fibres
2011
Elaboration of low-losses highly non linear chalcogenide optical fibers for the generation of efficient non linear effects in the infrared remains a challenge. In recent years, much work has been devoted to the study of microstructured optical fibers (MOFs) with different designs and various elaboration processes. Their background losses were typically of several dB/m.
An approach to the measurement of the nonlinear refractive index of very short lengths of optical fibers
2018
A method for the measurement of the nonlinear-refractive index coefficient in single-mode optical fibers is presented. It takes advantage of the high sensitivity of the acousto-optic interaction effect in optical fibers to the fiber properties. Direct measurement of the nonlinear-refractive index change resulting from cross-phase modulation between a probe and a pump signal is obtained from the fiber's acousto-optic interaction performance. It is a non-interferometric method in which a very short length of fiber (<0.25 m) is required.
Strong reduction of optimum pump power for efficient wave conversion in optical fibers with dual-frequency circularly polarized pump waves.
2002
We present experiments that show achievement of highly efficient generation of parametric sidebands in an optical fiber with dual-frequency, circularly polarized pump waves. An appropriate choice of the separation between the pump frequencies permits a strong reduction of the optimum power for highly efficient frequency conversion.
Enhanced supercontinuum generation in the nanosecond pump regime using specialty microstructured fibers
2009
Several alternatives have been investigated to achieve enhanced supercontinuum generation in the nanosecond pump regime using specialty silica-based microstructured optical fibers (MOFs). Among these alternatives we can point out the use of (a) MOF tapers, (b) highly Ge-doped core Y-shaped MOF and (c) Er-doped MOF. These specialty MOFs provide either an increased material nonlinear response or a rather small effective area, at the same time that the dispersion characteristics are adjusted to work at different excitation conditions. In our experiments, we have been using either a Q-switched Nd:YAG laser (10 Hz repetition rate) or an Yb-doped fiber laser (2 kHz repetition rate), both emitting…
Improving mid-infrared supercontinuum generation efficiency by pumping a fluoride fiber directly into the anomalous regime at 1995 nm
2011
Supercontinuum sources in the mid-infrared may found many potential applications to spectroscopy and material caracterization. Supercontinuum light extending up to 4000 nm has been efficiently generated in fluorozirconate glasses (ZBLAN) with 10.5 W power using an amplified nanosecond pulsed laser diode at 1550 nm [1]. As the dispersion wavelength of the fiber is closed to 1700 nm, pumping at 1550 nm does not directly allow generation of solitons. A first approach is thus to pump a piece of SMF fiber in the anomalous dispersion regime to generate the solitons and shift them to the anomalous dispersion regime of the ZBLAN fiber [1,2]. Another approach is to use a high power femtosecond laser…