Search results for "Quantum efficiency"
showing 10 items of 92 documents
Light harvesting with Ge quantum dots embedded in SiO2 and Si3N4
2014
Cataloged from PDF version of article. Germanium quantum dots (QDs) embedded in SiO2 or in Si3N4 have been studied for light harvesting purposes. SiGeO or SiGeN thin films, produced by plasma enhanced chemical vapor deposition, have been annealed up to 850 degrees C to induce Ge QD precipitation in Si based matrices. By varying the Ge content, the QD diameter can be tuned in the 3-9 nm range in the SiO2 matrix, or in the 1-2 nm range in the Si3N4 matrix, as measured by transmission electron microscopy. Thus, Si3N4 matrix hosts Ge QDs at higher density and more closely spaced than SiO2 matrix. Raman spectroscopy revealed a higher threshold for amorphous-to-crystalline transition for Ge QDs e…
Low-temperature growth of n ++-GaN by metalorganic chemical vapor deposition to achieve low-resistivity tunnel junctions on blue light emitting diodes
2018
We report on low-resistivity GaN tunnel junctions (TJ) on blue light-emitting diodes (LEDs). Si-doped n ++-GaN layers are grown by metalorganic chemical vapor deposition directly on LED epiwafers. Low growth temperature (<800 °C) was used to hinder Mg-passivation by hydrogen in the p ++-GaN top surface. This allows achieving low-resistivity TJs without the need for post-growth Mg activation. TJs are further improved by inserting a 5 nm thick In0.15Ga0.85N interlayer (IL) within the GaN TJ thanks to piezoelectric polarization induced band bending. Eventually, the impact of InGaN IL on the internal quantum efficiency of blue LEDs is discussed.
Efficient Perovskite Light-Emitting Diodes: Effect of Composition, Morphology, and Transport Layers
2018
Organic-inorganic metal halide perovskites are emerging as novel materials for light-emitting applications due to their high color purity, band gap tunability, straightforward synthesis, and inexpensive precursors. In this work, we improve the performance of three-dimensional perovskite light-emitting diodes (PeLEDs) by tuning the emissive layer composition and thickness and by using small-molecule transport layers. Additionally, we correlate PeLED efficiencies to the perovskite structure and morphology. The results show that the PeLEDs containing perovskites with an excess of methylammonium bromide (MABr) to lead bromide (PbBr2) in a 2:1 ratio and a layer thickness of 80 nm have the highes…
Phosphomolybdic acid as an efficient hole injection material in perovskite optoelectronic devices.
2018
Efficient perovskite devices consist in a perovskite film sandwiched in between charge selective layers, in order to avoid non-radiative recombination. A common metal oxide used as p-type or hole transport layer is molybdenum oxide. MoO3 is of particular interest for its very large work function, which allows it to be used both as an interfacial charge transfer material as well as a dopant for organic semiconductors. However, high quality and high work function MoO3 is typically thermally evaporated in vacuum. An alternative solution-processable high work function material is phosphomolybdic acid (PMA), which is stable, commercially available and environmentally friendly. In this communicat…
Exciton diffusion controlled quantum efficiency in hybrid dye sensitized solar cells.
2009
Well-ordered and uniform titania nanoparticle arrays were synthesized using diblock copolymers as structure directing agents. High molecular weight copolymers of polystyrene-b-polyethylene oxide and poly(methylmethacrylate)-b-polyethylene oxide were used to control the distance between titania nanoparticles in the range of 20-60 nm. Using these titania nanoparticle arrays and regioregular poly(3-hexylthiophene), models for a dye sensitized photovoltaic cell were assembled, in which the interparticle spacing was systematically varied. In these simplified solar cells, the titania nanocrystals were surrounded by a continuous regioregular poly(3-hexylthiophene) phase. The spacing between the ti…
External quantum efficiency measurements used to study the stability of differently deposited perovskite solar cells
2020
The instability exhibited by perovskite solar cells when exposed to the environment under illumination is one of the major obstacles for the entry of perovskite technology in the photovoltaic market. In this work, we use the external quantum efficiency (EQE) technique to study the photoinduced degradation of two types of solar cells having CH3NH3PbI3 as an absorber layer: one deposited by spin coating with an n-i-p architecture and the other deposited by evaporation with an inverted p-i-n structure. We also study the effect of different encapsulants to protect the cells against atmospheric agents. We find that EQE provides information regarding the areas of the cell most susceptible to degr…
Europium(III)-doped A(2)Hf(2)O(7) (A = Y, Gd, Lu) nanoparticles: Influence of annealing temperature, europium(III) concentration and host cation on t…
2016
The detailed analyses of structure and luminescence of europium(III)-doped A(2)Hf(2)O(7) (A = Y, Gd, Lu) nanoparticles is presented. Samples were prepared by time and cost effective combustion method that utilize polyethylene glycol both as a chelating agent and as a fuel, with different europium(III) concentrations (from 1 to 12 at.%), annealed at temperatures ranging from 800 to 1400 degrees C, and with alternating A(3+) cation in the A(2)Hf(2)O(7) host. Then, structural variations between materials were analysed by Xray diffraction and structural refinement, while the changes in the luminescence were assessed from the Judd-Ofelt analyses of emission spectra. Nanoparticles prepared at the…
Quantum dot-block copolymer hybrids with improved properties and their application to quantum dot light-emitting devices.
2009
To combine the optical properties of CdSe@ZnS quantum dots (QDs) with the electrical properties of semiconducting polymers, we prepared QD/polymer hybrids by grafting a block copolymer (BCP) containing thiol-anchoring moieties (poly(para-methyl triphenylamine-b-cysteamine acrylamide)) onto the surfaces of QDs through the ligand exchange procedure. The prepared QD/polymer hybrids possess improved processability such as enhanced solubility in various organic solvents as well as the film formation properties along with the improved colloidal stability derived from the grafted polymer shells. We also demonstrated light-emitting diodes based on QD/polymer hybrids, exhibiting the improved device …
Methoxycarbazolyl-disubstituted dibenzofuranes as holes- and electrons-transporting hosts for phosphorescent and TADF-based OLEDs
2020
This research was funded by European Social Fund (Project No 09.3.3-LMT-K-712-02-0105). DG acknowledges to the ERDF PostDoc grant No. 1.1.1.2/VIAA/1/16/177.
Performance data of optically stimulable irradiated materials (doped alkali halides) oriented for imaging and dosimetry purposes
1997
Performance characteristics of a doped alkali halide (KBr:In)-based imaging plate (IP) and dosemeter (D) both the devices utilizing optically stimulated luminescence (OSL) and suitable for UV-light and x-ray energy recording are described. By exploiting (silicon) photodiode array as a photodetector, the detective quantum efficiency of 0.1 for IP (KBr:In) can be achieved. A very wide dynamic range, 1010:1 for UV (6.35 eV) and 1011:1 for x-ray (44 kV tube voltage) OSL recording at the spatial resolution of 1 mm2, is favorable for digital imaging and considerably improves image quality. These possibilities are illustrated by presenting available information capacities, energy consumption per b…